Frontmatter

Articles in the same Issue

1. Frontmatter
3. Effects of Yttrium Addition on Microstructure and Mechanical Properties of AZ80–2Sn Magnesium Alloys
4. Direct Reduction of Ferrous Oxides to form an Iron-Rich Alternative Charge Material
5. Investigation of BaCO₃ Powders Synthesized by Microwave Homogeneous Precipitation
6. Research on the Influence of Technological Forging Parameters on the Quality of Biphasic Titanium Alloys
7. High-Temperature Graphitization Failure of Primary Superheater Tube
8. Metal Loss of Steam-Oxidized Alloys after Exposures at 675°C and 725°C for 500 Hours
9. CVD Diamond Coating on Al-Interlayered FeCoNi Alloy Substrate: An Interfacial Study
10. Kinetics Study on Reduction of CaWO₄ by Si from 1423 K to 1523 K
11. Effect of Boron and Titanium Addition on the Hot Ductility of Low-Carbon Nb-Containing Steel
12. The Effects of Carbon Content on the Microstructure and 650°C Tensile Properties of Incoloy 901 Superalloy
13. Ball Indentation Studies on the Effect of Nitrogen on the Tensile Properties of 316LN SS
14. Effect of Ga Addition on Morphology and Recovery of Primary Si During Al–Si Alloy Solidification Refining
15. Preparation and Thermal Properties of High-Purified Molten Nitrate Salt Materials with Heat Transfer and Storage