Frontmatter

Articles in the same Issue

1. Frontmatter
3. The Influence of the Induced Ferrite and Precipitates of Ti-bearing Steel on the Ductility of Continuous Casting Slab
4. Study on Evolution of Ti-containing Intermetallic Compounds in Alloy 2618-Ti during Homogenization
5. The Effects of Different P₂O₅ Content and Basicity on Phosphorus Enrichment in the CaO-SiO₂-Fe_tO-P₂O₅ Slag System
6. Dry Sliding Wear Behaviours of Valve Seat Inserts Produced from High Chromium White Iron
7. A Characterization for the Hot Flow Behaviors of As-extruded 7050 Aluminum Alloy
8. A Characterization of Hot Flow Behaviors Involving Different Softening Mechanisms by ANN for As-Forged Ti-10V-2Fe-3Al Alloy
9. Effect of Microwave Heating Conditions on the Preparation of High Surface Area Activated Carbon from Waste Bamboo
10. Laboratory Study on Oxide Inclusions in High-Strength Low-Alloyed Steel Refined by Slag with Basicity 2–5
11. Processing and Characterization of CrB₂-Based Novel Composites
12. Dispersion of Particles in the Emulsion by the Electric Current
13. Description of Grain Refinement by Dynamic Recrystallization Under Hot Compressions for As-Extruded 3Cr20Ni10W2 Heat-Resistant Alloy
14. Identification of Stable Processing Parameters in Ti–6Al–4V Alloy from a Wide Temperature Range Across β Transus and a Large Strain Rate Range
15. Life Estimation and Creep Damage Quantification of Service Exposed Reformer Tube