Received: 2014-6-8
Accepted: 2014-8-19
Published Online: 2014-11-11
Published in Print: 2015-10-1
©2015 by De Gruyter
Artikel in diesem Heft
- Frontmatter
- Deformation Behavior and Dynamic Recovery Kinetics of Ultrahigh Strength Steel BR1500HS at Elevated Temperature
- Study on Carbon Black Coated LiMn2O4 Doped with Cr2O3
- Structural and Magnetic Properties of Zinc and Silicon Oxides Doped Cu Ferrite for Temperature Controller Devices
- Prediction of FV520B Steel Flow Stresses at High Temperature and Strain Rates
- Study on Indirect Measuring Technology of EAF Steelmaking Decarburization Rate by Off-gas Analysis Technique in Hot State Experiment
- Quantitative Analysis of Dynamic Softening Behaviors Induced by Dynamic Recrystallization for Ti-10V-2Fe-2Al Alloy
- Removal of Fluorides and Chlorides from Zinc Oxide Fumes by Microwave Sulfating Roasting
- Mill Scale Corrosion and Prevention in Carbon Steel Heat Exchanger
- Effect of Secondary Cooling Conditions on Solidification Structure and Central Macrosegregation in Continuously Cast High-Carbon Rectangular Billet
- Thermodynamic Analysis of V-concentrating Phase Formation in V-bearing Steelmaking Slag Modified by MgO
- Study on Carbide in Forged and Annealed H13 Hot Work Die Steel
- Processing of Fireproof and High Temperature Durable Particleboard from Rice Husk
- Refining Tungsten Purification by Electron Beam Melting Based on the Thermal Equilibrium Calculation and Tungsten Loss Control
Schlagwörter für diesen Artikel
copper ferrite;
temperature controlling;
doping;
magnetic properties;
curie temperature
Creative Commons
BY-NC-ND 3.0
Artikel in diesem Heft
- Frontmatter
- Deformation Behavior and Dynamic Recovery Kinetics of Ultrahigh Strength Steel BR1500HS at Elevated Temperature
- Study on Carbon Black Coated LiMn2O4 Doped with Cr2O3
- Structural and Magnetic Properties of Zinc and Silicon Oxides Doped Cu Ferrite for Temperature Controller Devices
- Prediction of FV520B Steel Flow Stresses at High Temperature and Strain Rates
- Study on Indirect Measuring Technology of EAF Steelmaking Decarburization Rate by Off-gas Analysis Technique in Hot State Experiment
- Quantitative Analysis of Dynamic Softening Behaviors Induced by Dynamic Recrystallization for Ti-10V-2Fe-2Al Alloy
- Removal of Fluorides and Chlorides from Zinc Oxide Fumes by Microwave Sulfating Roasting
- Mill Scale Corrosion and Prevention in Carbon Steel Heat Exchanger
- Effect of Secondary Cooling Conditions on Solidification Structure and Central Macrosegregation in Continuously Cast High-Carbon Rectangular Billet
- Thermodynamic Analysis of V-concentrating Phase Formation in V-bearing Steelmaking Slag Modified by MgO
- Study on Carbide in Forged and Annealed H13 Hot Work Die Steel
- Processing of Fireproof and High Temperature Durable Particleboard from Rice Husk
- Refining Tungsten Purification by Electron Beam Melting Based on the Thermal Equilibrium Calculation and Tungsten Loss Control