Home Physical Sciences Effect of Secondary Cooling Conditions on Solidification Structure and Central Macrosegregation in Continuously Cast High-Carbon Rectangular Billet
Article Open Access

Effect of Secondary Cooling Conditions on Solidification Structure and Central Macrosegregation in Continuously Cast High-Carbon Rectangular Billet

  • Jie Zeng EMAIL logo and Weiqing Chen
Published/Copyright: November 15, 2014
Download Article (PDF)
High Temperature Materials and Processes
From the journal High Temperature Materials and Processes Volume 34 Issue 6

Received: 2014-4-6
Accepted: 2014-9-10
Published Online: 2014-11-15
Published in Print: 2015-10-1

©2015 by De Gruyter

Articles in the same Issue

  1. Frontmatter
  3. Deformation Behavior and Dynamic Recovery Kinetics of Ultrahigh Strength Steel BR1500HS at Elevated Temperature
  4. Study on Carbon Black Coated LiMn2O4 Doped with Cr2O3
  5. Structural and Magnetic Properties of Zinc and Silicon Oxides Doped Cu Ferrite for Temperature Controller Devices
  6. Prediction of FV520B Steel Flow Stresses at High Temperature and Strain Rates
  7. Study on Indirect Measuring Technology of EAF Steelmaking Decarburization Rate by Off-gas Analysis Technique in Hot State Experiment
  8. Quantitative Analysis of Dynamic Softening Behaviors Induced by Dynamic Recrystallization for Ti-10V-2Fe-2Al Alloy
  9. Removal of Fluorides and Chlorides from Zinc Oxide Fumes by Microwave Sulfating Roasting
  10. Mill Scale Corrosion and Prevention in Carbon Steel Heat Exchanger
  11. Effect of Secondary Cooling Conditions on Solidification Structure and Central Macrosegregation in Continuously Cast High-Carbon Rectangular Billet
  12. Thermodynamic Analysis of V-concentrating Phase Formation in V-bearing Steelmaking Slag Modified by MgO
  13. Study on Carbide in Forged and Annealed H13 Hot Work Die Steel
  14. Processing of Fireproof and High Temperature Durable Particleboard from Rice Husk
  15. Refining Tungsten Purification by Electron Beam Melting Based on the Thermal Equilibrium Calculation and Tungsten Loss Control
https://doi.org/10.1515/htmp-2014-0059
Keywords for this article
rectangular billet casting; cellular automaton-finite element method; equiaxed grain ratio; equiaxed grain compactness; carbon macrosegregation
Creative Commons
BY-NC-ND 3.0

Articles in the same Issue

  1. Frontmatter
  3. Deformation Behavior and Dynamic Recovery Kinetics of Ultrahigh Strength Steel BR1500HS at Elevated Temperature
  4. Study on Carbon Black Coated LiMn2O4 Doped with Cr2O3
  5. Structural and Magnetic Properties of Zinc and Silicon Oxides Doped Cu Ferrite for Temperature Controller Devices
  6. Prediction of FV520B Steel Flow Stresses at High Temperature and Strain Rates
  7. Study on Indirect Measuring Technology of EAF Steelmaking Decarburization Rate by Off-gas Analysis Technique in Hot State Experiment
  8. Quantitative Analysis of Dynamic Softening Behaviors Induced by Dynamic Recrystallization for Ti-10V-2Fe-2Al Alloy
  9. Removal of Fluorides and Chlorides from Zinc Oxide Fumes by Microwave Sulfating Roasting
  10. Mill Scale Corrosion and Prevention in Carbon Steel Heat Exchanger
  11. Effect of Secondary Cooling Conditions on Solidification Structure and Central Macrosegregation in Continuously Cast High-Carbon Rectangular Billet
  12. Thermodynamic Analysis of V-concentrating Phase Formation in V-bearing Steelmaking Slag Modified by MgO
  13. Study on Carbide in Forged and Annealed H13 Hot Work Die Steel
  14. Processing of Fireproof and High Temperature Durable Particleboard from Rice Husk
  15. Refining Tungsten Purification by Electron Beam Melting Based on the Thermal Equilibrium Calculation and Tungsten Loss Control
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 12.12.2025 from https://www.degruyterbrill.com/document/doi/10.1515/htmp-2014-0059/html
Scroll to top button