Received: 2012-07-05
Accepted: 2012-10-06
Published Online: 2013-02-21
Published in Print: 2013-02-22
©[2013] by Walter de Gruyter Berlin Boston
Artikel in diesem Heft
- Masthead
- Synthesis and Characterization of the One-dimensional Cuprate Sr2CuO3 Nanoparticles Prepared by Modified Sol-gel Method
- Influence of Element Re on Creep Behavior of Single Crystal Nickel-Based Superalloys at Intermediate Temperature
- Dissolution Rate of Various Limes into Steelmaking Slag
- Raman Study of Solid Nitrogen in the β Phase and Close to the Melting Line
- The Technology of Plasma Spray Physical Vapour Deposition
- Rheological Behaviors of the Glass Paste for Hermetic Sealing the Edge of the Vacuum Glazing
- Synthesis and Characterization of BaCO3 Nanoparticles with Different Morphologies by Microwave Homogenous Precipitation
- Heat Resistant Poly(amide-imide)s Derived from N,N′-(4,4′-Pyromellitoyl)-bis-L-phenyl Acetic Acid and Aromatic Diamines: Synthesis and Properties
- Rupture of Cavity Film Due to Water Entry of Horizontal Superhydrophobic Circular Cylinders
- Growth Directions of Primary Phases in Directionally Solidified Ti-45Al-7Nb Alloys
- Temperature Dependence of the Spontaneous Polarization Near the Ferroelectric-Paraelectric Transition in NaNO2
- High-Temperature Oxidation Behavior and Formation Mechanism of Rolling Cracks of Fe-36Ni Invar Alloy
- Numerical Simulation of the Strength and Plasticity Performance in Austenitic Stainless Steel
Creative Commons
BY-NC-ND 3.0
Artikel in diesem Heft
- Masthead
- Synthesis and Characterization of the One-dimensional Cuprate Sr2CuO3 Nanoparticles Prepared by Modified Sol-gel Method
- Influence of Element Re on Creep Behavior of Single Crystal Nickel-Based Superalloys at Intermediate Temperature
- Dissolution Rate of Various Limes into Steelmaking Slag
- Raman Study of Solid Nitrogen in the β Phase and Close to the Melting Line
- The Technology of Plasma Spray Physical Vapour Deposition
- Rheological Behaviors of the Glass Paste for Hermetic Sealing the Edge of the Vacuum Glazing
- Synthesis and Characterization of BaCO3 Nanoparticles with Different Morphologies by Microwave Homogenous Precipitation
- Heat Resistant Poly(amide-imide)s Derived from N,N′-(4,4′-Pyromellitoyl)-bis-L-phenyl Acetic Acid and Aromatic Diamines: Synthesis and Properties
- Rupture of Cavity Film Due to Water Entry of Horizontal Superhydrophobic Circular Cylinders
- Growth Directions of Primary Phases in Directionally Solidified Ti-45Al-7Nb Alloys
- Temperature Dependence of the Spontaneous Polarization Near the Ferroelectric-Paraelectric Transition in NaNO2
- High-Temperature Oxidation Behavior and Formation Mechanism of Rolling Cracks of Fe-36Ni Invar Alloy
- Numerical Simulation of the Strength and Plasticity Performance in Austenitic Stainless Steel