Skip to main content
Article Open Access

High-Temperature Oxidation Behavior and Formation Mechanism of Rolling Cracks of Fe-36Ni Invar Alloy

  • EMAIL logo , and
Published/Copyright: February 21, 2013
Download Article (PDF)
High Temperature Materials and Processes
From the journal High Temperature Materials and Processes Volume 32 Issue 1

Received: 2012-07-10
Accepted: 2012-09-01
Published Online: 2013-02-21
Published in Print: 2013-02-22

©[2013] by Walter de Gruyter Berlin Boston

Articles in the same Issue

  1. Masthead
  2. Synthesis and Characterization of the One-dimensional Cuprate Sr2CuO3 Nanoparticles Prepared by Modified Sol-gel Method
  3. Influence of Element Re on Creep Behavior of Single Crystal Nickel-Based Superalloys at Intermediate Temperature
  4. Dissolution Rate of Various Limes into Steelmaking Slag
  5. Raman Study of Solid Nitrogen in the β Phase and Close to the Melting Line
  6. The Technology of Plasma Spray Physical Vapour Deposition
  7. Rheological Behaviors of the Glass Paste for Hermetic Sealing the Edge of the Vacuum Glazing
  8. Synthesis and Characterization of BaCO3 Nanoparticles with Different Morphologies by Microwave Homogenous Precipitation
  9. Heat Resistant Poly(amide-imide)s Derived from N,N′-(4,4′-Pyromellitoyl)-bis-L-phenyl Acetic Acid and Aromatic Diamines: Synthesis and Properties
  10. Rupture of Cavity Film Due to Water Entry of Horizontal Superhydrophobic Circular Cylinders
  11. Growth Directions of Primary Phases in Directionally Solidified Ti-45Al-7Nb Alloys
  12. Temperature Dependence of the Spontaneous Polarization Near the Ferroelectric-Paraelectric Transition in NaNO2
  13. High-Temperature Oxidation Behavior and Formation Mechanism of Rolling Cracks of Fe-36Ni Invar Alloy
  14. Numerical Simulation of the Strength and Plasticity Performance in Austenitic Stainless Steel
https://doi.org/10.1515/htmp-2012-0073
Keywords for this article
Fe-36Ni invar alloy; the external scale; the subscale scale; rolling cracks
Creative Commons
BY-NC-ND 3.0

Articles in the same Issue

  1. Masthead
  2. Synthesis and Characterization of the One-dimensional Cuprate Sr2CuO3 Nanoparticles Prepared by Modified Sol-gel Method
  3. Influence of Element Re on Creep Behavior of Single Crystal Nickel-Based Superalloys at Intermediate Temperature
  4. Dissolution Rate of Various Limes into Steelmaking Slag
  5. Raman Study of Solid Nitrogen in the β Phase and Close to the Melting Line
  6. The Technology of Plasma Spray Physical Vapour Deposition
  7. Rheological Behaviors of the Glass Paste for Hermetic Sealing the Edge of the Vacuum Glazing
  8. Synthesis and Characterization of BaCO3 Nanoparticles with Different Morphologies by Microwave Homogenous Precipitation
  9. Heat Resistant Poly(amide-imide)s Derived from N,N′-(4,4′-Pyromellitoyl)-bis-L-phenyl Acetic Acid and Aromatic Diamines: Synthesis and Properties
  10. Rupture of Cavity Film Due to Water Entry of Horizontal Superhydrophobic Circular Cylinders
  11. Growth Directions of Primary Phases in Directionally Solidified Ti-45Al-7Nb Alloys
  12. Temperature Dependence of the Spontaneous Polarization Near the Ferroelectric-Paraelectric Transition in NaNO2
  13. High-Temperature Oxidation Behavior and Formation Mechanism of Rolling Cracks of Fe-36Ni Invar Alloy
  14. Numerical Simulation of the Strength and Plasticity Performance in Austenitic Stainless Steel
Downloaded on 15.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/htmp-2012-0073/html
Scroll to top button