Article
Licensed
Unlicensed
Requires Authentication
Phylogenetic analysis and discoloration characteristics of major molds inhabiting woods. Part 3. Genus Cladosporium
-
Young Min Lee
Published/Copyright:
December 13, 2011
Abstract
The genus Cladosporium Link is one of the most well-known dark molds causing sapwood discoloration. Although the Cladosporium species are widespread in the world, little is known about the extent to which they stain wood. Twenty-eight isolates from seven different tree species in Korea were obtained and investigated in this study. Nine species, including three unknown Cladosporium species, were identified based on their genotypic characteristics. Cladosporiumcladosporioides was the dominant species, followed by C. rectoides, C. perangustum, C. pseudocladosporioides, C. tenuissimum, and C. ramotenellum . Their discoloration ability was determined with sapwood blocks of Japanese red pine (Pinus densiflora) and radiata pine (Pinus radiata). On both blocks, Cladosporium tenuissimum and C. cladosporioides showed the highest level of discoloration.
Keywords: actin; Cladosporium; dark mold; phylogeny; translation elongation factor 1-α; wood discoloration
Received: 2011-6-1
Accepted: 2011-11-8
Published Online: 2011-12-13
Published in Print: 2012-05-01
©2012 by Walter de Gruyter Berlin Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Original Papers
- Synthesis of glucose esters from cellulose in ionic liquids
- A new soy flour-polyepoxide adhesive system for making interior plywood
- Hydrophobisation of mechanical pulp fibres with sodium dodecyl sulphate functionalised layered double hydroxide particles
- Effect of pH on lignin analysis by Raman spectroscopy
- Fractionation and characterization of lignin carbohydrate complexes (LCCs) of Eucalyptus globulus in residues left after MWL isolation. Part I: Analyses of hemicellulose-lignin fraction (HC-L)
- Surface and internal micro/ultrastructure of TMP fibres produced during high-intensity refining elucidate the development of pulp and paper properties
- Mechanoradical formation and its effects on birch kraft pulp during the preparation of nanofibrillated cellulose with Masuko refining
- Influence of specimen configuration on the measurement of the off-axis Young’s modulus of wood by vibration tests
- Effect of lignin and hemicelluloses on the tensile strength of micro-veneers determined at finite span and zero span
- Revisiting the neutral axis in wood beams
- Relationship between copper species in solution and leaching from alkaline copper quat (ACQ) treated wood
- Assessment of the early signs of decay of Populus deltoides wafers exposed to Trametes versicolor by near infrared spectroscopy
- Community analysis of preservative-treated southern pine (Pinus spp.) using terminal restriction fragment length polymorphism (T-RFLP) analysis. Part 1: Fungal field study
- Community analysis of preservative-treated southern pine (Pinus spp.) using terminal restriction fragment length polymorphism (T-RFLP) analysis. Part 2: Bacteria field study
- Phylogenetic analysis and discoloration characteristics of major molds inhabiting woods. Part 3. Genus Cladosporium
- Identification of biochemical differences between the sapwood and transition zone in Robinia pseudoacacia L. by differential display of proteins
- Short Notes
- Reduction of formaldehyde emission from light MDF panels by adding chestnut shell flour
- On the structure of the active compound in mass deacidification of paper
- Meetings
- Meetings
- Masthead
- Masthead
Keywords for this article
actin;
Cladosporium;
dark mold;
phylogeny;
translation elongation factor 1-α;
wood discoloration
Articles in the same Issue
- Original Papers
- Synthesis of glucose esters from cellulose in ionic liquids
- A new soy flour-polyepoxide adhesive system for making interior plywood
- Hydrophobisation of mechanical pulp fibres with sodium dodecyl sulphate functionalised layered double hydroxide particles
- Effect of pH on lignin analysis by Raman spectroscopy
- Fractionation and characterization of lignin carbohydrate complexes (LCCs) of Eucalyptus globulus in residues left after MWL isolation. Part I: Analyses of hemicellulose-lignin fraction (HC-L)
- Surface and internal micro/ultrastructure of TMP fibres produced during high-intensity refining elucidate the development of pulp and paper properties
- Mechanoradical formation and its effects on birch kraft pulp during the preparation of nanofibrillated cellulose with Masuko refining
- Influence of specimen configuration on the measurement of the off-axis Young’s modulus of wood by vibration tests
- Effect of lignin and hemicelluloses on the tensile strength of micro-veneers determined at finite span and zero span
- Revisiting the neutral axis in wood beams
- Relationship between copper species in solution and leaching from alkaline copper quat (ACQ) treated wood
- Assessment of the early signs of decay of Populus deltoides wafers exposed to Trametes versicolor by near infrared spectroscopy
- Community analysis of preservative-treated southern pine (Pinus spp.) using terminal restriction fragment length polymorphism (T-RFLP) analysis. Part 1: Fungal field study
- Community analysis of preservative-treated southern pine (Pinus spp.) using terminal restriction fragment length polymorphism (T-RFLP) analysis. Part 2: Bacteria field study
- Phylogenetic analysis and discoloration characteristics of major molds inhabiting woods. Part 3. Genus Cladosporium
- Identification of biochemical differences between the sapwood and transition zone in Robinia pseudoacacia L. by differential display of proteins
- Short Notes
- Reduction of formaldehyde emission from light MDF panels by adding chestnut shell flour
- On the structure of the active compound in mass deacidification of paper
- Meetings
- Meetings
- Masthead
- Masthead
