Home Influence of blue stain on density and dimensional stability of Pinus radiata timber from northern Galicia (Spain)
Article
Licensed
Unlicensed Requires Authentication

Influence of blue stain on density and dimensional stability of Pinus radiata timber from northern Galicia (Spain)

  • María C. Abuín Rouco and Guillermo Riesco Muñoz EMAIL logo
Published/Copyright: May 10, 2014
Become an author with De Gruyter Brill

Abstract

The presence of blue-stain fungi considerably decreases the value of Pinus radiata timber, which is commercially important in Galicia (NW Spain). For this study, seven young pine trees growing in four different plantations were felled, and 20 discs were sampled from different heights in the stems. Parts of the discs were discoloured as a result of fungal infection. The discs were cut into small specimens. Defect-free specimens (controls) were selected for determining density and dimensional stability both in the volume and in the axial direction. Physical properties of fully blue-stained specimens and the controls were compared for each disc based on one-factor analysis of variance. As the factor was blue-stain, the other sources of variation were suppressed, such as tree source, height in the stem, ring width, cambial age and presence of heartwood or sapwood. Most of the physical properties analysed on some sample discs differed significantly between discoloured and unstained wood. The variables most affected by blue stain were basic density and volumetric shrinkage: blue-stained wood was 1.1% lighter and volumetric shrinkage was 5% higher in blue-stained wood than in the controls.


Corresponding author: Guillermo Riesco Muñoz, University of Santiago de Compostela, Department of Agroforestry Engineering, Higher Polytechnic School, University Campus, 27002 Lugo, Spain, Phone: 0034-982-823233, e-mail

References

AENOR (1977a) UNE 56531:1977. Determinación del peso específico. Asociación Española de Normalización y Certificación, Madrid.Search in Google Scholar

AENOR (1977b) UNE 56532:1977. Determinación de la higroscopicidad. Asociación Española de Normalización y Certificación, Madrid.Search in Google Scholar

AENOR (1977c) UNE 56533:1977. Determinación de las contracciones lineal y volumétrica. Asociación Española de Normalización y Certificación, Madrid.Search in Google Scholar

AENOR (1978a) UNE 56528:1978. Preparación de probetas para ensayos. Asociación Española de Normalización y Certificación, Madrid.Search in Google Scholar

AENOR (1978b) UNE 56540:1978. Interpretación de los resultados de los ensayos. Asociación Española de Normalización y Certificación, Madrid.Search in Google Scholar

AENOR (2008) UNE-EN 1927-2:2008. Clasificación de calidad de la madera en rollo de coníferas. Parte 2: Pinos. Asociación Española de Normalización y Certificación, Madrid.Search in Google Scholar

AENOR (2011) UNE 56544:2011. Clasificación visual de la madera aserrada para uso estructural. Madera de coníferas. Asociación Española de Normalización y Certificación, Madrid.Search in Google Scholar

Aufsess, H.V. (1981) Effects of silver fir dieback on the wood properties of affected trees. Forstwissenschaftliches Centralblatt. 100:217–228.10.1007/BF02640638Search in Google Scholar

Byrne, T., Woo, K.L., Uzunovic, A., Watson, P.A. An annotated bibliography on the effect of bluestain on wood utilization with emphasis on mountain pine beetle-vectored bluestain. Working Paper 2005–4. Canadian Forest Service, Victoria, 2005.Search in Google Scholar

Chapman, A.D., Scheffer, T.C. (1940) Effect of bluestain on specific gravity and strength of southern pine. J.Agric.Res. 61:125–133.Search in Google Scholar

European Committee for Standardization (2002) EN 13183-1:2002. Moisture content of a piece of sawn timber – Part 1: Determination by oven dry method.Search in Google Scholar

European Committee for Standardization (2010) EN 384:2010. Structural timber. Determination of characteristic values of mechanical properties and density.Search in Google Scholar

European Committee for Standardization (2011) EN 408:2011. Timber structures. Structural timber and glued laminated timber. Determination of some physical and mechanical properties.Search in Google Scholar

Fernández-Golfín Seco, J.I. Manual de usuario pino insignis del País Vasco. Centro Técnico de la Madera, ZTB, Vitoria, 1996.Search in Google Scholar

Forest Products Laboratory. Wood handbook. Wood as an engineering material. General Technical Report FPL-GTR-190. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, 2010.Search in Google Scholar

Ghosh, S.C., Dyckmans, J., Militz, H., Mai, C. (2012) Effect of quat- and amino-silicones on fungal colonisation and decay of wood. Holzforschung 66:1009–1015.10.1515/hf-2012-0024Search in Google Scholar

Gradinger, C., Boisselet, T., Stratev, D., Ters, T., Messner, K., Fackler, K. (2009) Biological control of sapstain fungi: From laboratory experiments to field trials 10th EWLP, Stockholm, Sweden, August 25–28, 2008. Holzforschung 63:751–759.10.1515/HF.2009.071Search in Google Scholar

Gutiérrez, A., Plaza, F. Características físico-mecánicas de las maderas españolas. Instituto Forestal de Investigaciones y Experiencias, Madrid, 1967.Search in Google Scholar

Hong, J.H., Lee, J., Min, M., Ryu, S.M., Lee, D., Kim, G.H., Kim, J.J. (2014) 6-Pentyl-α- pyrone as an anti-sapstain compound produced by Trichoderma gamsii KUC1747 inhibits the germination of ophiostomatoid fungi. Holzforschung 68:769–774.10.1515/hf-2013-0171Search in Google Scholar

International Organization for Standardization (1975) ISO 3131:1975. Wood. Determination of density for physical and mechanical tests.Search in Google Scholar

Jayawickrama, K.J.S. (2001) Breeding radiata pine for wood stiffness: review and analysis. Austral. For. 64:51–56.10.1080/00049158.2001.10676161Search in Google Scholar

Kininmonth, J.A., Whitehouse, L.J. Properties and uses of New Zealand radiata pine (vol. I, Wood properties). Ministry of Forestry, FRI, Christchurch, 1991.Search in Google Scholar

Koehler, A. (1931) Longitudinal shrinkage of wood. Transactions of the American Society of Mechanical Engineers. 53:17–20.Search in Google Scholar

Kollmann, F. Tecnología de la madera y sus aplicaciones (vol. I). Instituto Forestal de Investigaciones y Experiencias, Madrid, 1959.Search in Google Scholar

McFarling, S., Byrne, A. Characterizing the dimensional stability, checking, and permeability of wood containing beetle-transmitted bluestain. Report to Forest Innovation Investment. Forintek Canada Corp., Vancouver, 2003.Search in Google Scholar

Rey Prieto, A., Riesco Muñoz, G. (2012) Influencia del azulado (mancha azul) en la densidad y estabilidad dimensional de la madera de Pinus sylvestris. Maderas-Cienc. Tecnol. 14:115–125.Search in Google Scholar

Riesco, G., Díaz, J. (2007) Características físicas de la madera de pino procedente de raleos en el noroeste de España. Maderas-Cienc. Tecnol. 9:233–244.Search in Google Scholar

Rodríguez, J., Arriaga, F. (1988) Patología de la madera. In: Curso de Construcción en Madera. Eds. Colegio Oficial de Arquitectos de Madrid, Madrid. pp. 205–236.Search in Google Scholar

Schirp, A., Farrell, R.L., Kreber, B. (2000) Capability of staining fungi to cause structural changes in New Zealand radiata pine: toughness testing and enzyme production. Maderas-Cienc. Tecnol. 2:119–129.Search in Google Scholar

Torres Juan, J. El azulado de la madera y su tratamiento. AITIM, Madrid, 1964.Search in Google Scholar

Vignote, S., Martínez, I. Tecnología de la madera. Mundi-Prensa, Madrid, 2006.Search in Google Scholar

Zobel, B.J., Van Buijtenen, J.P. Wood variation. Its causes and control. Springer Verlag, Berlin, 1989.10.1007/978-3-642-74069-5Search in Google Scholar

Received: 2014-1-17
Accepted: 2014-4-4
Published Online: 2014-5-10
Published in Print: 2015-1-1

©2015 by De Gruyter

Articles in the same Issue

  1. Frontmatter
  2. Original Articles
  3. Influence of spruce xylan characteristics on tensile strength of spruce kraft pulp
  4. Evidence for a very slow disaggregation of lignosulfonates
  5. Slow relaxation mode of sodium lignosulfonate in saline solutions
  6. Influence of carboxylic group content on the solution behavior of carboxymethylated lignin (CML) in water
  7. Chemithermomechanical and kraft pulping of Pinus radiata wood chips after the hydrothermal extraction of hemicelluloses
  8. In-plane shear strength of paper measured by asymmetric four-point bending test
  9. Strain distribution and load transfer in the polymer-wood particle bond in wood plastic composites
  10. Structural changes in spruce wood during different steps of steam explosion pretreatment
  11. A critical review of the multilayer sorption models and comparison with the sorption site occupancy (SSO) model for wood moisture sorption isotherm analysis
  12. Hygric properties of Norway spruce and sycamore after incubation with two white rot fungi
  13. On-line monitoring of hygroscopicity and dimensional changes of wood during thermal modification by means of neutron imaging methods
  14. Influence of blue stain on density and dimensional stability of Pinus radiata timber from northern Galicia (Spain)
  15. Bacterial and abiotic decay in waterlogged archaeological Picea abies (L.) Karst studied by confocal Raman imaging and ATR-FTIR spectroscopy
  16. Effects of vitamin E combined with antioxidants on wood flour/polypropylene composites during accelerated weathering
  17. Short Note
  18. Tensile behaviour and fracture mechanism of moso bamboo (Phyllostachys pubescens)
  19. Lignin masks the presence of fibrillar network structure in the cell corner middle lamella (CCML)
Downloaded on 14.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/hf-2014-0014/html
Scroll to top button