Creep and Cyclic Mechanical Properties of Composites Based on Shape Memory Polymer

Takeru Ohki,; Qing-Qing Ni,; Masaharu Iwamoto,

doi:10.1515/SECM.2004.11.2-3.137

Startseite Creep and Cyclic Mechanical Properties of Composites Based on Shape Memory Polymer

Artikel Open Access

Creep and Cyclic Mechanical Properties of Composites Based on Shape Memory Polymer

Takeru Ohki, , Qing-Qing Ni, und Masaharu Iwamoto,

Veröffentlicht/Copyright: 1. September 2004

Artikel downloaden (PDF)

Veröffentlicht von

Veröffentlichen auch Sie bei De Gruyter Brill

Manuskript einreichen Informationen für Autor*innen

Aus der Zeitschrift Science and Engineering of Composite Materials Band 11 Heft 2-3

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

Ohki,, Takeru, Ni,, Qing-Qing and Iwamoto,, Masaharu. "Creep and Cyclic Mechanical Properties of Composites Based on Shape Memory Polymer" Science and Engineering of Composite Materials, vol. 11, no. 2-3, 2004, pp. 137-148. https://doi.org/10.1515/SECM.2004.11.2-3.137

Ohki,, T., Ni,, Q. & Iwamoto,, M. (2004). Creep and Cyclic Mechanical Properties of Composites Based on Shape Memory Polymer. Science and Engineering of Composite Materials, 11(2-3), 137-148. https://doi.org/10.1515/SECM.2004.11.2-3.137

Ohki,, T., Ni,, Q. and Iwamoto,, M. (2004) Creep and Cyclic Mechanical Properties of Composites Based on Shape Memory Polymer. Science and Engineering of Composite Materials, Vol. 11 (Issue 2-3), pp. 137-148. https://doi.org/10.1515/SECM.2004.11.2-3.137

Ohki,, Takeru, Ni,, Qing-Qing and Iwamoto,, Masaharu. "Creep and Cyclic Mechanical Properties of Composites Based on Shape Memory Polymer" Science and Engineering of Composite Materials 11, no. 2-3 (2004): 137-148. https://doi.org/10.1515/SECM.2004.11.2-3.137

Ohki, T, Ni, Q, Iwamoto, M. Creep and Cyclic Mechanical Properties of Composites Based on Shape Memory Polymer. Science and Engineering of Composite Materials. 2004;11(2-3): 137-148. https://doi.org/10.1515/SECM.2004.11.2-3.137

Kopie

In die Zwischenablage kopiert

BibTeX EndNote RIS

Published Online: 2004-09

Artikel in diesem Heft

TABLE OF CONTENTS
Progressive Failure Analysis of Composite Laminates Subjected to In-Plane Compressive and Shear Loadings
Materials and Structural Design for Lightweight Primary Mirrors
Damage Monitoring of Al2O3/Epoxy Laminates with Luminance Change of Transmitted Light from EL Device
Shear Buckling Analysis of Angle-Ply Laminates with Higher- Order Shear Deformation and pb-2 Ritz Functions
Creep and Cyclic Mechanical Properties of Composites Based on Shape Memory Polymer
Modeling of Laminated Composite Structures with Piezoelectric Actuators
Fragmentation Analysis of Single-Fiber Carbon Composites
Development of Compression Bending Test Method for Advanced Composites - A Review
Inspection of Thick Composites for Near Surface Flaws
Evaluation of Particle Size and Particle Shape Distributions in Al-Al3Ni FGMs Fabricated by a Centrifugal in-situ Method
Development of TTMSP to Predict the Performance of Discontinuous Natural Fibre-Polymer Composites
Identification of Damping Parameters for Laminated Shallow Cylindrical Shells

Zeitschrift durchsuchen In dieser Zeitschrift suchen

https://doi.org/10.1515/SECM.2004.11.2-3.137

Creative Commons

BY-NC-ND 3.0

Artikel in diesem Heft

TABLE OF CONTENTS
Progressive Failure Analysis of Composite Laminates Subjected to In-Plane Compressive and Shear Loadings
Materials and Structural Design for Lightweight Primary Mirrors
Damage Monitoring of Al2O3/Epoxy Laminates with Luminance Change of Transmitted Light from EL Device
Shear Buckling Analysis of Angle-Ply Laminates with Higher- Order Shear Deformation and pb-2 Ritz Functions
Creep and Cyclic Mechanical Properties of Composites Based on Shape Memory Polymer
Modeling of Laminated Composite Structures with Piezoelectric Actuators
Fragmentation Analysis of Single-Fiber Carbon Composites
Development of Compression Bending Test Method for Advanced Composites - A Review
Inspection of Thick Composites for Near Surface Flaws
Evaluation of Particle Size and Particle Shape Distributions in Al-Al3Ni FGMs Fabricated by a Centrifugal in-situ Method
Development of TTMSP to Predict the Performance of Discontinuous Natural Fibre-Polymer Composites
Identification of Damping Parameters for Laminated Shallow Cylindrical Shells