Fragmentation Analysis of Single-Fiber Carbon Composites

Shinji Ogihara,; Akira Mochizuki,; Yasuo Kogo,; Shoji Noguchi,; Hiroshi Mizoguchi,; Masanori Kikuchi,

doi:10.1515/SECM.2004.11.2-3.161

Home Fragmentation Analysis of Single-Fiber Carbon Composites

Article Open Access

Fragmentation Analysis of Single-Fiber Carbon Composites

Shinji Ogihara, , Akira Mochizuki, , Yasuo Kogo, , Shoji Noguchi, , Hiroshi Mizoguchi, and Masanori Kikuchi,

Published/Copyright: September 1, 2004

Download Article (PDF)

Published by

Become an author with De Gruyter Brill

Submit Manuscript Author Information

From the journal Science and Engineering of Composite Materials Volume 11 Issue 2-3

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

Ogihara,, Shinji, Mochizuki,, Akira, Kogo,, Yasuo, Noguchi,, Shoji, Mizoguchi,, Hiroshi and Kikuchi,, Masanori. "Fragmentation Analysis of Single-Fiber Carbon Composites" Science and Engineering of Composite Materials, vol. 11, no. 2-3, 2004, pp. 161-168. https://doi.org/10.1515/SECM.2004.11.2-3.161

Ogihara,, S., Mochizuki,, A., Kogo,, Y., Noguchi,, S., Mizoguchi,, H. & Kikuchi,, M. (2004). Fragmentation Analysis of Single-Fiber Carbon Composites. Science and Engineering of Composite Materials, 11(2-3), 161-168. https://doi.org/10.1515/SECM.2004.11.2-3.161

Ogihara,, S., Mochizuki,, A., Kogo,, Y., Noguchi,, S., Mizoguchi,, H. and Kikuchi,, M. (2004) Fragmentation Analysis of Single-Fiber Carbon Composites. Science and Engineering of Composite Materials, Vol. 11 (Issue 2-3), pp. 161-168. https://doi.org/10.1515/SECM.2004.11.2-3.161

Ogihara,, Shinji, Mochizuki,, Akira, Kogo,, Yasuo, Noguchi,, Shoji, Mizoguchi,, Hiroshi and Kikuchi,, Masanori. "Fragmentation Analysis of Single-Fiber Carbon Composites" Science and Engineering of Composite Materials 11, no. 2-3 (2004): 161-168. https://doi.org/10.1515/SECM.2004.11.2-3.161

Ogihara, S, Mochizuki, A, Kogo, Y, Noguchi, S, Mizoguchi, H, Kikuchi, M. Fragmentation Analysis of Single-Fiber Carbon Composites. Science and Engineering of Composite Materials. 2004;11(2-3): 161-168. https://doi.org/10.1515/SECM.2004.11.2-3.161

Copy

Copied to clipboard

BibTeX EndNote RIS

Published Online: 2004-09

Articles in the same Issue

TABLE OF CONTENTS
Progressive Failure Analysis of Composite Laminates Subjected to In-Plane Compressive and Shear Loadings
Materials and Structural Design for Lightweight Primary Mirrors
Damage Monitoring of Al2O3/Epoxy Laminates with Luminance Change of Transmitted Light from EL Device
Shear Buckling Analysis of Angle-Ply Laminates with Higher- Order Shear Deformation and pb-2 Ritz Functions
Creep and Cyclic Mechanical Properties of Composites Based on Shape Memory Polymer
Modeling of Laminated Composite Structures with Piezoelectric Actuators
Fragmentation Analysis of Single-Fiber Carbon Composites
Development of Compression Bending Test Method for Advanced Composites - A Review
Inspection of Thick Composites for Near Surface Flaws
Evaluation of Particle Size and Particle Shape Distributions in Al-Al3Ni FGMs Fabricated by a Centrifugal in-situ Method
Development of TTMSP to Predict the Performance of Discontinuous Natural Fibre-Polymer Composites
Identification of Damping Parameters for Laminated Shallow Cylindrical Shells

Search journal Search the content of this journal

https://doi.org/10.1515/SECM.2004.11.2-3.161

Creative Commons

BY-NC-ND 3.0

Articles in the same Issue

TABLE OF CONTENTS
Progressive Failure Analysis of Composite Laminates Subjected to In-Plane Compressive and Shear Loadings
Materials and Structural Design for Lightweight Primary Mirrors
Damage Monitoring of Al2O3/Epoxy Laminates with Luminance Change of Transmitted Light from EL Device
Shear Buckling Analysis of Angle-Ply Laminates with Higher- Order Shear Deformation and pb-2 Ritz Functions
Creep and Cyclic Mechanical Properties of Composites Based on Shape Memory Polymer
Modeling of Laminated Composite Structures with Piezoelectric Actuators
Fragmentation Analysis of Single-Fiber Carbon Composites
Development of Compression Bending Test Method for Advanced Composites - A Review
Inspection of Thick Composites for Near Surface Flaws
Evaluation of Particle Size and Particle Shape Distributions in Al-Al3Ni FGMs Fabricated by a Centrifugal in-situ Method
Development of TTMSP to Predict the Performance of Discontinuous Natural Fibre-Polymer Composites
Identification of Damping Parameters for Laminated Shallow Cylindrical Shells