Article
Licensed
Unlicensed
Requires Authentication
CONTENTS
Published/Copyright:
March 1, 2009
Published Online: 2009-03
©2011 by Walter de Gruyter GmbH & Co.
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- PREFACE
- CONTENTS
- UV-Curable Hybrid Primers Composed of Vinyl Terminated Polyurethane Acrylate Oligomers and Vinyltrimethoxysilane (VTMS) for Aluminuum and Polycarbonate Interfaces
- Dehumidification of Air by the Hydrophilic Composite Membrane using Hydrophilic Polymer on Inorganic Substrate
- Preparation and Properties of Polyurethane Nanocomposites with Organoclay or Nanosilica
- Morphology of PAI and PA-PDMS Composites Made by Sol-Gel Process
- Improvement in Weatherability of Transparent Plastics by Sol-Gel Coating with UV Absorber and HALS
- Polyurethane-Amide Hybrid Dispersions
- Diffused Reflection of Micro-Cellular Foamed Polylactic Acid (PLA)
- The Influence of Microcellular Foaming Process on Electrical Conductivity of Conductive Composites
- Effects of Molding Parameters on the Through-Plane Resistance of Injection Molded Composite Polymer Bipolar Plate
- Effect of Mold Temperature on Mechanical Properties of an Injection-Molded Part with Microfeatures
- A Study on Maskless Fabrication of Micro Les Array using UV Laser Local Thermal-Expansion Technology
- Experimental Study on Physical Properties of PMMA Mortar Mixed with Reactive Additive
Articles in the same Issue
- PREFACE
- CONTENTS
- UV-Curable Hybrid Primers Composed of Vinyl Terminated Polyurethane Acrylate Oligomers and Vinyltrimethoxysilane (VTMS) for Aluminuum and Polycarbonate Interfaces
- Dehumidification of Air by the Hydrophilic Composite Membrane using Hydrophilic Polymer on Inorganic Substrate
- Preparation and Properties of Polyurethane Nanocomposites with Organoclay or Nanosilica
- Morphology of PAI and PA-PDMS Composites Made by Sol-Gel Process
- Improvement in Weatherability of Transparent Plastics by Sol-Gel Coating with UV Absorber and HALS
- Polyurethane-Amide Hybrid Dispersions
- Diffused Reflection of Micro-Cellular Foamed Polylactic Acid (PLA)
- The Influence of Microcellular Foaming Process on Electrical Conductivity of Conductive Composites
- Effects of Molding Parameters on the Through-Plane Resistance of Injection Molded Composite Polymer Bipolar Plate
- Effect of Mold Temperature on Mechanical Properties of an Injection-Molded Part with Microfeatures
- A Study on Maskless Fabrication of Micro Les Array using UV Laser Local Thermal-Expansion Technology
- Experimental Study on Physical Properties of PMMA Mortar Mixed with Reactive Additive
