The Influence of Microcellular Foaming Process on Electrical Conductivity of Conductive Composites

Byungjoo Jeon,; Sung Woon Cha,; Kyung Soo Lee,; Hak Bin Kim,

doi:10.1515/POLYENG.2009.29.1-3.103

Home Physical Sciences The Influence of Microcellular Foaming Process on Electrical Conductivity of Conductive Composites

Article

Licensed

Unlicensed Requires Authentication

The Influence of Microcellular Foaming Process on Electrical Conductivity of Conductive Composites

Byungjoo Jeon, , Sung Woon Cha, , Kyung Soo Lee, and Hak Bin Kim,

Published/Copyright: March 1, 2009

Published by

Become an author with De Gruyter Brill

Submit Manuscript Author Information

From the journal Journal of Polymer Engineering Volume 29 Issue 1-3

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

Jeon,, Byungjoo, Cha,, Sung Woon, Lee,, Kyung Soo and Kim,, Hak Bin. "The Influence of Microcellular Foaming Process on Electrical Conductivity of Conductive Composites" Journal of Polymer Engineering, vol. 29, no. 1-3, pp. 103-120. https://doi.org/10.1515/POLYENG.2009.29.1-3.103

Jeon,, B., Cha,, S., Lee,, K. & Kim,, H. (). The Influence of Microcellular Foaming Process on Electrical Conductivity of Conductive Composites. Journal of Polymer Engineering, 29(1-3), 103-120. https://doi.org/10.1515/POLYENG.2009.29.1-3.103

Jeon,, B., Cha,, S., Lee,, K. and Kim,, H. () The Influence of Microcellular Foaming Process on Electrical Conductivity of Conductive Composites. Journal of Polymer Engineering, Vol. 29 (Issue 1-3), pp. 103-120. https://doi.org/10.1515/POLYENG.2009.29.1-3.103

Jeon,, Byungjoo, Cha,, Sung Woon, Lee,, Kyung Soo and Kim,, Hak Bin. "The Influence of Microcellular Foaming Process on Electrical Conductivity of Conductive Composites" Journal of Polymer Engineering 29, no. 1-3 (): 103-120. https://doi.org/10.1515/POLYENG.2009.29.1-3.103

Jeon, B, Cha, S, Lee, K, Kim, H. The Influence of Microcellular Foaming Process on Electrical Conductivity of Conductive Composites. Journal of Polymer Engineering. ;29(1-3): 103-120. https://doi.org/10.1515/POLYENG.2009.29.1-3.103

Copy

Copied to clipboard

BibTeX EndNote RIS

Published Online: 2009-03

You are currently not able to access this content.

Articles in the same Issue

PREFACE
CONTENTS
UV-Curable Hybrid Primers Composed of Vinyl Terminated Polyurethane Acrylate Oligomers and Vinyltrimethoxysilane (VTMS) for Aluminuum and Polycarbonate Interfaces
Dehumidification of Air by the Hydrophilic Composite Membrane using Hydrophilic Polymer on Inorganic Substrate
Preparation and Properties of Polyurethane Nanocomposites with Organoclay or Nanosilica
Morphology of PAI and PA-PDMS Composites Made by Sol-Gel Process
Improvement in Weatherability of Transparent Plastics by Sol-Gel Coating with UV Absorber and HALS
Polyurethane-Amide Hybrid Dispersions
Diffused Reflection of Micro-Cellular Foamed Polylactic Acid (PLA)
The Influence of Microcellular Foaming Process on Electrical Conductivity of Conductive Composites
Effects of Molding Parameters on the Through-Plane Resistance of Injection Molded Composite Polymer Bipolar Plate
Effect of Mold Temperature on Mechanical Properties of an Injection-Molded Part with Microfeatures
A Study on Maskless Fabrication of Micro Les Array using UV Laser Local Thermal-Expansion Technology
Experimental Study on Physical Properties of PMMA Mortar Mixed with Reactive Additive

Search journal Search the content of this journal

https://doi.org/10.1515/POLYENG.2009.29.1-3.103

Articles in the same Issue

PREFACE
CONTENTS
UV-Curable Hybrid Primers Composed of Vinyl Terminated Polyurethane Acrylate Oligomers and Vinyltrimethoxysilane (VTMS) for Aluminuum and Polycarbonate Interfaces
Dehumidification of Air by the Hydrophilic Composite Membrane using Hydrophilic Polymer on Inorganic Substrate
Preparation and Properties of Polyurethane Nanocomposites with Organoclay or Nanosilica
Morphology of PAI and PA-PDMS Composites Made by Sol-Gel Process
Improvement in Weatherability of Transparent Plastics by Sol-Gel Coating with UV Absorber and HALS
Polyurethane-Amide Hybrid Dispersions
Diffused Reflection of Micro-Cellular Foamed Polylactic Acid (PLA)
The Influence of Microcellular Foaming Process on Electrical Conductivity of Conductive Composites
Effects of Molding Parameters on the Through-Plane Resistance of Injection Molded Composite Polymer Bipolar Plate
Effect of Mold Temperature on Mechanical Properties of an Injection-Molded Part with Microfeatures
A Study on Maskless Fabrication of Micro Les Array using UV Laser Local Thermal-Expansion Technology
Experimental Study on Physical Properties of PMMA Mortar Mixed with Reactive Additive