Home Preparation and Properties of Polyurethane Nanocomposites with Organoclay or Nanosilica
Article
Licensed
Unlicensed Requires Authentication

Preparation and Properties of Polyurethane Nanocomposites with Organoclay or Nanosilica

  • B. K. Kim, , J. W. Seo, and H. M. Jeong,
Published/Copyright: March 1, 2009
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Journal of Polymer Engineering
From the journal Journal of Polymer Engineering Volume 29 Issue 1-3

Published Online: 2009-03

©2011 by Walter de Gruyter GmbH & Co.

Articles in the same Issue

  1. PREFACE
  2. CONTENTS
  3. UV-Curable Hybrid Primers Composed of Vinyl Terminated Polyurethane Acrylate Oligomers and Vinyltrimethoxysilane (VTMS) for Aluminuum and Polycarbonate Interfaces
  4. Dehumidification of Air by the Hydrophilic Composite Membrane using Hydrophilic Polymer on Inorganic Substrate
  5. Preparation and Properties of Polyurethane Nanocomposites with Organoclay or Nanosilica
  6. Morphology of PAI and PA-PDMS Composites Made by Sol-Gel Process
  7. Improvement in Weatherability of Transparent Plastics by Sol-Gel Coating with UV Absorber and HALS
  8. Polyurethane-Amide Hybrid Dispersions
  9. Diffused Reflection of Micro-Cellular Foamed Polylactic Acid (PLA)
  10. The Influence of Microcellular Foaming Process on Electrical Conductivity of Conductive Composites
  11. Effects of Molding Parameters on the Through-Plane Resistance of Injection Molded Composite Polymer Bipolar Plate
  12. Effect of Mold Temperature on Mechanical Properties of an Injection-Molded Part with Microfeatures
  13. A Study on Maskless Fabrication of Micro Les Array using UV Laser Local Thermal-Expansion Technology
  14. Experimental Study on Physical Properties of PMMA Mortar Mixed with Reactive Additive
https://doi.org/10.1515/POLYENG.2009.29.1-3.27

Articles in the same Issue

  1. PREFACE
  2. CONTENTS
  3. UV-Curable Hybrid Primers Composed of Vinyl Terminated Polyurethane Acrylate Oligomers and Vinyltrimethoxysilane (VTMS) for Aluminuum and Polycarbonate Interfaces
  4. Dehumidification of Air by the Hydrophilic Composite Membrane using Hydrophilic Polymer on Inorganic Substrate
  5. Preparation and Properties of Polyurethane Nanocomposites with Organoclay or Nanosilica
  6. Morphology of PAI and PA-PDMS Composites Made by Sol-Gel Process
  7. Improvement in Weatherability of Transparent Plastics by Sol-Gel Coating with UV Absorber and HALS
  8. Polyurethane-Amide Hybrid Dispersions
  9. Diffused Reflection of Micro-Cellular Foamed Polylactic Acid (PLA)
  10. The Influence of Microcellular Foaming Process on Electrical Conductivity of Conductive Composites
  11. Effects of Molding Parameters on the Through-Plane Resistance of Injection Molded Composite Polymer Bipolar Plate
  12. Effect of Mold Temperature on Mechanical Properties of an Injection-Molded Part with Microfeatures
  13. A Study on Maskless Fabrication of Micro Les Array using UV Laser Local Thermal-Expansion Technology
  14. Experimental Study on Physical Properties of PMMA Mortar Mixed with Reactive Additive
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 23.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/POLYENG.2009.29.1-3.27/html
Scroll to top button