Morphology of PAI and PA-PDMS Composites Made by Sol-Gel Process

Articles in the same Issue

1. PREFACE
2. CONTENTS
3. UV-Curable Hybrid Primers Composed of Vinyl Terminated Polyurethane Acrylate Oligomers and Vinyltrimethoxysilane (VTMS) for Aluminuum and Polycarbonate Interfaces
4. Dehumidification of Air by the Hydrophilic Composite Membrane using Hydrophilic Polymer on Inorganic Substrate
5. Preparation and Properties of Polyurethane Nanocomposites with Organoclay or Nanosilica
6. Morphology of PAI and PA-PDMS Composites Made by Sol-Gel Process
7. Improvement in Weatherability of Transparent Plastics by Sol-Gel Coating with UV Absorber and HALS
8. Polyurethane-Amide Hybrid Dispersions
9. Diffused Reflection of Micro-Cellular Foamed Polylactic Acid (PLA)
10. The Influence of Microcellular Foaming Process on Electrical Conductivity of Conductive Composites
11. Effects of Molding Parameters on the Through-Plane Resistance of Injection Molded Composite Polymer Bipolar Plate
12. Effect of Mold Temperature on Mechanical Properties of an Injection-Molded Part with Microfeatures
13. A Study on Maskless Fabrication of Micro Les Array using UV Laser Local Thermal-Expansion Technology
14. Experimental Study on Physical Properties of PMMA Mortar Mixed with Reactive Additive