Artikel
Lizenziert
Nicht lizenziert
Erfordert eine Authentifizierung
Meetings
Veröffentlicht/Copyright:
4. Februar 2008
Published Online: 2008-02-04
Published in Print: 2008-03-01
©2008 by Walter de Gruyter Berlin New York
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Artikel in diesem Heft
- Meetings
- Cellulose aerogels: Highly porous, ultra-lightweight materials
- Esterification of carboxylic acids on cellulosic material: Solid state reactions
- Bagasse alkaline sulfite-anthraquinone (AS/AQ) pulping and totally chlorine free (TCF) bleaching
- Effect of abnormal fibres on the mechanical properties of paper made from Norway spruce, Picea abies (L.) Karst.
- Development of fully bio-based composite: Wood/cellulose diacetate/poly(lactic acid) composite
- Crystallinity and mesoporosity of carbon produced from ligno-p-cresol and their improvement by pulverization and acid treatment
- Revisiting the mechanism of β-O-4 bond cleavage during acidolysis of lignin. Part 1: Kinetics of the formation of enol ether from non-phenolic C6-C2 type model compounds
- Study of kinetics of reaction of lignin model compounds with propylene oxide
- Two-dimensional homo- and hetero-correlation technique applied to NIR and py-MBMS spectra of wood
- UV resonance Raman spectroscopic study of photodegradation of hardwood and softwood lignins by UV laser
- A multivariate approach to the acetylated poplar wood samples by near infrared spectroscopy
- Structure elucidation of phenylethanoid glycosides from Paulownia tomentosa Steud. var. tomentosa wood
- A generalized mat consolidation model for wood composites
- Prediction and optimization of surface roughness in milling of medium density fiberboard (MDF) based on Taguchi orthogonal array experiments
- An investigation on the permeability of different wood furnish materials
- Laccase-catalyzed functionalization with 4-hydroxy-3-methoxybenzylurea significantly improves internal bond of particle boards
- Effect of thermo-mechanical refining pressure on the properties of wood fibers as measured by nanoindentation and atomic force microscopy
- Adhesive bond strength of end grain joints in softwood with varying density
- An experimental study of the effects of moisture variations and gradients in the joint area in steel-timber dowel joints
- A new image analysis algorithm for calculating percentage wood failure
- Dr. Gordon Leary
Artikel in diesem Heft
- Meetings
- Cellulose aerogels: Highly porous, ultra-lightweight materials
- Esterification of carboxylic acids on cellulosic material: Solid state reactions
- Bagasse alkaline sulfite-anthraquinone (AS/AQ) pulping and totally chlorine free (TCF) bleaching
- Effect of abnormal fibres on the mechanical properties of paper made from Norway spruce, Picea abies (L.) Karst.
- Development of fully bio-based composite: Wood/cellulose diacetate/poly(lactic acid) composite
- Crystallinity and mesoporosity of carbon produced from ligno-p-cresol and their improvement by pulverization and acid treatment
- Revisiting the mechanism of β-O-4 bond cleavage during acidolysis of lignin. Part 1: Kinetics of the formation of enol ether from non-phenolic C6-C2 type model compounds
- Study of kinetics of reaction of lignin model compounds with propylene oxide
- Two-dimensional homo- and hetero-correlation technique applied to NIR and py-MBMS spectra of wood
- UV resonance Raman spectroscopic study of photodegradation of hardwood and softwood lignins by UV laser
- A multivariate approach to the acetylated poplar wood samples by near infrared spectroscopy
- Structure elucidation of phenylethanoid glycosides from Paulownia tomentosa Steud. var. tomentosa wood
- A generalized mat consolidation model for wood composites
- Prediction and optimization of surface roughness in milling of medium density fiberboard (MDF) based on Taguchi orthogonal array experiments
- An investigation on the permeability of different wood furnish materials
- Laccase-catalyzed functionalization with 4-hydroxy-3-methoxybenzylurea significantly improves internal bond of particle boards
- Effect of thermo-mechanical refining pressure on the properties of wood fibers as measured by nanoindentation and atomic force microscopy
- Adhesive bond strength of end grain joints in softwood with varying density
- An experimental study of the effects of moisture variations and gradients in the joint area in steel-timber dowel joints
- A new image analysis algorithm for calculating percentage wood failure
- Dr. Gordon Leary