Article
Licensed
Unlicensed
Requires Authentication
Lignin-carbohydrate network in wood and pulps: A determinant for reactivity
-
Gunnar Henriksson
Published/Copyright:
November 1, 2007
Abstract
Pretreatment of wood or kraft pulp with endoglucanase followed by swelling in urea leaves a non-crystalline residue that can be dissolved in strong aqueous sodium hydroxide-sodium borate solution. A stepwise precipitation process employing acid and barium ions can separate lignin-carbohydrate complexes enriched in individual polysaccharides. This procedure has been applied to eucalypt and birch wood and to the corresponding kraft pulps. Thioacidolysis of the various lignin-carbohydrate complexes was used as the major analytical technique to obtain information about the structure and structural changes in lignin. A combination of thioacidolysis and size exclusion chromatography was used to obtain knowledge on the degree of depolymerisation and repolymerisation of lignin when going from wood to chemical pulp. In contrast to spruce wood and kraft pulp, complete recovery of the lignin-carbohydrate complexes could not be obtained from hardwood samples.
Keywords: birch; endoglucanase; Eucalyptus globulus; kraft pulp; lignin-carbohydrate complex (LCC); size exclusion chromatography (SEC); spruce; thioacidolysis
Received: 2007-1-30
Accepted: 2007-4-17
Published Online: 2007-11-01
Published in Print: 2007-11-01
©2007 by Walter de Gruyter Berlin New York
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Acknowledgement
- Subject index
- Contents Volume 61 (2007)
- Author index
- Species index (scientific names)
- Meetings
- Improvement of Pinus pinaster Ait elite trees selection by combining near infrared spectroscopy and genetic tools
- Direct method for the determination of phenolic hydroxyl groups in pulp
- Comparative effect of ozone, chlorine dioxide, and hydrogen peroxide on lignin: Reactions affecting pulp colour in the final bleaching stage
- Structural modification of eucalypt pulp lignin in a totally chlorine-free bleaching sequence including a laccase-mediator stage
- Analysis of wood tissues by time-of-flight secondary ion mass spectrometry
- Isolation and identification of residual chromophores from aged bleached pulp samples
- Studies on oxidative modifications of cellulose in the periodate system: Molecular weight distribution and carbonyl group profiles
- Lignin-carbohydrate network in wood and pulps: A determinant for reactivity
- Cross polarisation/magic angle spinning 13C-NMR spectroscopic studies of cellulose structural changes in hardwood dissolving pulp process
- Fungal decay of spruce and beech wood assessed by near-infrared spectroscopy in combination with uni- and multivariate data analysis
- Paper mill sludge as a component of wood adhesive formulation
- Implementation of sorption hysteresis in multi-Fickian moisture transport
- Time/temperature equivalence in the dry wood creep response
- Neural network prediction of bending strength and stiffness in western hemlock (Tsuga heterophylla Raf.)
- Bending properties of particleboard and MDF layers
- Gold as an X-ray CT scanning contrast agent: Effect on the mechanical properties of wood plastic composites
- Lignin modification in the initial phase of softwood kraft pulp delignification with polyoxometalates (POMs)
Keywords for this article
birch;
endoglucanase;
Eucalyptus globulus;
kraft pulp;
lignin-carbohydrate complex (LCC);
size exclusion chromatography (SEC);
spruce;
thioacidolysis
Articles in the same Issue
- Acknowledgement
- Subject index
- Contents Volume 61 (2007)
- Author index
- Species index (scientific names)
- Meetings
- Improvement of Pinus pinaster Ait elite trees selection by combining near infrared spectroscopy and genetic tools
- Direct method for the determination of phenolic hydroxyl groups in pulp
- Comparative effect of ozone, chlorine dioxide, and hydrogen peroxide on lignin: Reactions affecting pulp colour in the final bleaching stage
- Structural modification of eucalypt pulp lignin in a totally chlorine-free bleaching sequence including a laccase-mediator stage
- Analysis of wood tissues by time-of-flight secondary ion mass spectrometry
- Isolation and identification of residual chromophores from aged bleached pulp samples
- Studies on oxidative modifications of cellulose in the periodate system: Molecular weight distribution and carbonyl group profiles
- Lignin-carbohydrate network in wood and pulps: A determinant for reactivity
- Cross polarisation/magic angle spinning 13C-NMR spectroscopic studies of cellulose structural changes in hardwood dissolving pulp process
- Fungal decay of spruce and beech wood assessed by near-infrared spectroscopy in combination with uni- and multivariate data analysis
- Paper mill sludge as a component of wood adhesive formulation
- Implementation of sorption hysteresis in multi-Fickian moisture transport
- Time/temperature equivalence in the dry wood creep response
- Neural network prediction of bending strength and stiffness in western hemlock (Tsuga heterophylla Raf.)
- Bending properties of particleboard and MDF layers
- Gold as an X-ray CT scanning contrast agent: Effect on the mechanical properties of wood plastic composites
- Lignin modification in the initial phase of softwood kraft pulp delignification with polyoxometalates (POMs)
