Studies on oxidative modifications of cellulose in the periodate system: Molecular weight distribution and carbonyl group profiles
-
Antje Potthast
Abstract
The effects of periodate oxidation on cellulose were studied by means of gel permeation chromatography (GPC) using multiple detection and carbonyl-selective fluorescence labeling according to the CCOA methodology profiling of carbonyl groups. At low degrees of oxidation, the molecular weight distribution was fully maintained. Upon more pronounced oxidation the molecular weight even increased due to cross-linking effects. More condensed structures were identified by means of light scattering. Periodate oxidation also affects crystalline regions of cellulose, as demonstrated by comparison of homogeneous and heterogeneous carbonyl labeling. Highly ordered regions in cellulose were affected by oxidation even below an oxidation degree of 2%. Two different phases for the oxidation kinetics were identified in the early stages of periodate treatments.
©2007 by Walter de Gruyter Berlin New York
Articles in the same Issue
- Acknowledgement
- Subject index
- Contents Volume 61 (2007)
- Author index
- Species index (scientific names)
- Meetings
- Improvement of Pinus pinaster Ait elite trees selection by combining near infrared spectroscopy and genetic tools
- Direct method for the determination of phenolic hydroxyl groups in pulp
- Comparative effect of ozone, chlorine dioxide, and hydrogen peroxide on lignin: Reactions affecting pulp colour in the final bleaching stage
- Structural modification of eucalypt pulp lignin in a totally chlorine-free bleaching sequence including a laccase-mediator stage
- Analysis of wood tissues by time-of-flight secondary ion mass spectrometry
- Isolation and identification of residual chromophores from aged bleached pulp samples
- Studies on oxidative modifications of cellulose in the periodate system: Molecular weight distribution and carbonyl group profiles
- Lignin-carbohydrate network in wood and pulps: A determinant for reactivity
- Cross polarisation/magic angle spinning 13C-NMR spectroscopic studies of cellulose structural changes in hardwood dissolving pulp process
- Fungal decay of spruce and beech wood assessed by near-infrared spectroscopy in combination with uni- and multivariate data analysis
- Paper mill sludge as a component of wood adhesive formulation
- Implementation of sorption hysteresis in multi-Fickian moisture transport
- Time/temperature equivalence in the dry wood creep response
- Neural network prediction of bending strength and stiffness in western hemlock (Tsuga heterophylla Raf.)
- Bending properties of particleboard and MDF layers
- Gold as an X-ray CT scanning contrast agent: Effect on the mechanical properties of wood plastic composites
- Lignin modification in the initial phase of softwood kraft pulp delignification with polyoxometalates (POMs)
Articles in the same Issue
- Acknowledgement
- Subject index
- Contents Volume 61 (2007)
- Author index
- Species index (scientific names)
- Meetings
- Improvement of Pinus pinaster Ait elite trees selection by combining near infrared spectroscopy and genetic tools
- Direct method for the determination of phenolic hydroxyl groups in pulp
- Comparative effect of ozone, chlorine dioxide, and hydrogen peroxide on lignin: Reactions affecting pulp colour in the final bleaching stage
- Structural modification of eucalypt pulp lignin in a totally chlorine-free bleaching sequence including a laccase-mediator stage
- Analysis of wood tissues by time-of-flight secondary ion mass spectrometry
- Isolation and identification of residual chromophores from aged bleached pulp samples
- Studies on oxidative modifications of cellulose in the periodate system: Molecular weight distribution and carbonyl group profiles
- Lignin-carbohydrate network in wood and pulps: A determinant for reactivity
- Cross polarisation/magic angle spinning 13C-NMR spectroscopic studies of cellulose structural changes in hardwood dissolving pulp process
- Fungal decay of spruce and beech wood assessed by near-infrared spectroscopy in combination with uni- and multivariate data analysis
- Paper mill sludge as a component of wood adhesive formulation
- Implementation of sorption hysteresis in multi-Fickian moisture transport
- Time/temperature equivalence in the dry wood creep response
- Neural network prediction of bending strength and stiffness in western hemlock (Tsuga heterophylla Raf.)
- Bending properties of particleboard and MDF layers
- Gold as an X-ray CT scanning contrast agent: Effect on the mechanical properties of wood plastic composites
- Lignin modification in the initial phase of softwood kraft pulp delignification with polyoxometalates (POMs)