Home Efficiency and work performance of TiNi alloy undergoing B2 ↔ R martensitic transformation
Article
Licensed
Unlicensed Requires Authentication

Efficiency and work performance of TiNi alloy undergoing B2 ↔ R martensitic transformation

  • Natalia Resnina , Sergey Belyaev , Ksenia Anshukova and Roman Zhuravlev
Published/Copyright: May 8, 2014
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 105 Issue 5

Abstract

This study is devoted to the investigation of the ability of Ti48Ni52 alloys for production of effective work during thermal cycling over a narrow temperature range. Effective work output and efficiency were studied in Ti48Ni52 alloy subjected to thermal cycling through the temperature range of the B2 ↔ R martensitic transformation under different stress regimes. The optimal stress regimes for production of effective work output and maximum efficiency were found. The data obtained have shown that under optimal stress conditions (cooling of the sample under a stress of 100 MPa and heating under a stress of 400 MPa), one may develop a device with effective work being equal to 1.5 MJ m−3 and an efficiency of 2.5 %. During repeated thermal cycling under the optimal stress regime the alloy accumulated 8 % irreversible strain per 30 cycles. Starting from the 20th cycle the rate of irreversible strain accumulation was equal to ∼ 0.06 % per cycle.

Keywords: Shape memory alloy; Martensite heat engine; B2 ↔ R martensitic transformation; Work performance; Efficiency
* Correspondence address, Dr. Natalia Resnina, Universitetsky pr. 28, Saint-Petersburg, 198504, Russia, Tel.: +7-812-4284238, Fax: +7-812-4284238, E-mail:

References

[1] M.Hashimoto, M.Takeda, H.Sagawa, I.Chiba, K.Sato: J. Rob. Syst.2 (1985) 3.Search in Google Scholar

[2] J.Van Humbeeck: Mater. Sci. Eng. A273–275 (1999) 134.10.1016/S0921-5093(99)00293-2Search in Google Scholar

[3] D.E.Hodgson: Mater. Sci. Forum394–395 (2002) 69.10.4028/www.scientific.net/MSF.394-395.69Search in Google Scholar

[4] N.B.Morgan: Mater. Sci. Eng. A378 (2004) 16. 10.1016/j.msea.2003.10.326Search in Google Scholar

[5] A.I.Razov: Phys. Metal. Metallog.97 (2004) S97.Search in Google Scholar

[6] D.J.Hartl, D.C.Lagoudas: J. Aero. Eng.221 (2007) 535.Search in Google Scholar

[7] R.Salzbrenner: J. Mater. Sci.19 (1984) 1827. 10.1007/BF00550253Search in Google Scholar

[8] M.Tanaka, K.Saito: J. Mech. Eng. Lab.47 (1993) 257.Search in Google Scholar

[9] T.Kanada: J. Optoelectr. Adv. Mater.10 (2008) 1061.Search in Google Scholar

[10] H.Tobushi, K.Date, K.Miyamoto: J. Solid Mech. Mater.4–7 (2010) 1094.Search in Google Scholar

[11] H.Tobushi, K.Miyamoto, K.Mitsui: Trans. Jpn. Soc. Mech. Eng., Part A77 (2011) 754. 10.1299/kikaia.77.754Search in Google Scholar

[12] S.Belyaev, N.Resnina, R.Zhuravlev: J. Alloys Compd. (2012); doi.org/10.1016/j.jallcom.2012.02.039.Search in Google Scholar

[13] S.Belyaev, N.Resnina: Inter. J. Mater. Res.104 (2013) 11. 10.3139/146.110830Search in Google Scholar

[14] K.Otsuka, X.Ren: Prog. Mater. Sci.50 (2005) 511. 10.1016/j.pmatsci.2004.10.001Search in Google Scholar

[15] S.Miyazaki, Y.Igo, K.Otsuka: Acta Metall.34 (1986) 2045. 10.1016/0001-6160(86)90263-4Search in Google Scholar

[16] P.G.McCormick, Y.Liu: Acta Metall. Mater.42 (1994) 2407. 10.1016/0956-7151(94)90319-0Search in Google Scholar

[17] H.Matsumoto: J. Alloys Compd.350 (2003) 213. 10.1016/S0925-8388(02)00982-9Search in Google Scholar

[18] H.Matsumoto: J. Alloys Compd.368 (2004) 182. 10.1016/S0925-8388(03)00730-8Search in Google Scholar

[19] N.Resnina, S.Belyaev: J. Alloys Compd.486 (2009) 304. 10.1016/j.jallcom.2009.06.132Search in Google Scholar

[20] C.Urbina, S.De la Flora, F.Gispert-Guirado, F.Ferrando: Intermetallics18 (2010) 1632. 10.1016/j.intermet.2010.04.020Search in Google Scholar

[21] A.R.Pelton, G.H.Huang, P.Moine, R.Sinclair: Mater. Sci. Eng. A532 (2012) 130. 10.1016/j.msea.2011.10.073Search in Google Scholar

[22] C.M.Wayman, I.Cornelis, K.Shimizu: Scr. Metall.6 (1972) 115. 10.1016/0036-9748(72)90261-XSearch in Google Scholar

[23] W.Tang, R.Sandström: Mater. Des.14 (1993) 103. 10.1016/0261-3069(93)90003-ESearch in Google Scholar

[24] Y.Li, X.Mi, B.Gao, J.Tan: Rare Met.27 (2008) 522. 10.1016/S1001-0521(08)60027-3Search in Google Scholar

[25] B.Ye, B.S.Majumdar, I.Dutta: Acta Mater.57 (2009) 2403. 10.1016/j.actamat.2009.01.032Search in Google Scholar

[26] C.N.Saikrishna, K.V.Ramaiah, S. AllamPrabhu, S.K.Bhaumik: Bull. Mater. Sci.32 (2009) 343. 10.1007/s12034-009-0049-1Search in Google Scholar

[27] N.G.Jones, D.Dye: Intermetallics19 (2011) 1348. 10.1016/j.intermet.2011.03.032Search in Google Scholar

[28] S.P.Belyaev, S.L.Kuzmin, V.A.Likhachev, S.M.Kovalev: Fiz. Met. Metalloved.63 (1987) 1017.Search in Google Scholar

[29] J.Van Humbeeck: J. Phys. IV1 (1991) C4–189. 10.1051/jp4:1991429Search in Google Scholar

[30] Y.Furuya, Y.C.Park: Nondestr. Test. Eval.8–9 (1992) 541.Search in Google Scholar

[31] G.Eggeler, E.Hornbogen, A.Yawny, A.Heckmann, M.Wagner: Mater. Sci. Eng. A378 (2004) 24. 10.1016/j.msea.2003.10.327Search in Google Scholar

[32] I.Ohkata, H.Tamura: Mater. Res. Soc. Symp. – Proc.459 (1997) 345. 10.1557/PROC-459-345Search in Google Scholar

[33] J.Uchil, K.K.Ganesh, K.K.Mahesh: Proc. SPIE Int. Soc. Opt. Eng.4701 (2002) 435.Search in Google Scholar

[34] M.Tomozawa, K.Okutsu, H.Y.Kim, S.Miyazaki: Mater. Sci. Forum475–479 (2005) 2037.Search in Google Scholar

[35] V.B.Krishnan, C.Bewerse, W.U.Notardonato, R.Vaidyanathan: AIP Conference Proceedings986 (2008) 3. 10.1063/1.2900374Search in Google Scholar

[36] R.M.S.Martins, N.Schell, P.R.Gordo, M.J.P.Maneira, R.J.C.Silva, F.M. BrazFernandes: Vacuum83 (2009) 1299. 10.1016/j.vacuum.2009.03.027Search in Google Scholar

[37] K.Lygin, S.Langbein, P.Labenda, T.Sadek: J. Mater. Eng. Perform.21 (2012) 2657. 10.1007/s11665-012-0285-1Search in Google Scholar

[38] K.Lygin, P.Labenda, T.Sadek: Mater. Sci. Forum738–739 (2013) 584.Search in Google Scholar

[39] V.Zel'dovich, G.Sobyanina, T.V.Novoselova: J. Phys. IV7 (1997) C5–299. 10.1051/jp4:1997528Search in Google Scholar

[40] S.P.Belyaev, S.L.Kuz'min, V.A.Lichachev: Strength Mater.16 (1985) 863. 10.1007/BF01529978Search in Google Scholar

Received: 2013-09-27
Accepted: 2013-11-26
Published Online: 2014-05-08
Published in Print: 2014-05-13

© 2014, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Review
  4. Research trends in microwave dielectrics and factors affecting their properties: A review
  5. Original Contributions
  6. Efficiency and work performance of TiNi alloy undergoing B2 ↔ R martensitic transformation
  7. Fabrication of Gasar made from Cu-24 wt.% Mn alloy
  8. Effect of intermediate frequency electromagnetic field on the solidification structure and mechanical properties of direct chill cast Al-8 wt.%Si alloy
  9. Effect of Ni-based conversion coating and Ni–P electroless plating on the bonding process of pure Al and AZ31 alloy
  10. Effect of ball milling time on the synthesis of nanocrystalline merwinite via mechanical activation and heat treatment
  11. Structural and magnetic properties of Fe–Al2O3 soft magnetic composites prepared using the sol–gel method
  12. Improved dielectric performance of barium strontium titanate multilayered capacitor by means of pulsed laser deposition and slow injection sol–gel methods
  13. Effect of heat treatment on the slurry erosion resistance of high strength steel DP980
  14. Development of biomimetic gelatin–chitosan/hydroxyapatite nanocomposite via double diffusion method for biomedical applications
  15. Short Communications
  16. Effects of rolling rate on microstructure and mechanical properties of Mg sheets
  17. Effect of post-weld heat treatment on dissimilar friction stir welded AA6063 and A319 aluminium alloys
  18. Dielectric and magnetic properties of Ba0.8Sr0.2TiO3 – Y3Fe5O12 – YFeO3 composites
  19. Microwave-assisted modulated synthesis of zirconium-based metal–organic framework (Zr-MOF) for hydrogen storage applications
  20. DGM News
  21. DGM News
https://doi.org/10.3139/146.111058
Keywords for this article
Shape memory alloy; Martensite heat engine; B2 ↔ R martensitic transformation; Work performance; Efficiency

Articles in the same Issue

  1. Contents
  2. Contents
  3. Review
  4. Research trends in microwave dielectrics and factors affecting their properties: A review
  5. Original Contributions
  6. Efficiency and work performance of TiNi alloy undergoing B2 ↔ R martensitic transformation
  7. Fabrication of Gasar made from Cu-24 wt.% Mn alloy
  8. Effect of intermediate frequency electromagnetic field on the solidification structure and mechanical properties of direct chill cast Al-8 wt.%Si alloy
  9. Effect of Ni-based conversion coating and Ni–P electroless plating on the bonding process of pure Al and AZ31 alloy
  10. Effect of ball milling time on the synthesis of nanocrystalline merwinite via mechanical activation and heat treatment
  11. Structural and magnetic properties of Fe–Al2O3 soft magnetic composites prepared using the sol–gel method
  12. Improved dielectric performance of barium strontium titanate multilayered capacitor by means of pulsed laser deposition and slow injection sol–gel methods
  13. Effect of heat treatment on the slurry erosion resistance of high strength steel DP980
  14. Development of biomimetic gelatin–chitosan/hydroxyapatite nanocomposite via double diffusion method for biomedical applications
  15. Short Communications
  16. Effects of rolling rate on microstructure and mechanical properties of Mg sheets
  17. Effect of post-weld heat treatment on dissimilar friction stir welded AA6063 and A319 aluminium alloys
  18. Dielectric and magnetic properties of Ba0.8Sr0.2TiO3 – Y3Fe5O12 – YFeO3 composites
  19. Microwave-assisted modulated synthesis of zirconium-based metal–organic framework (Zr-MOF) for hydrogen storage applications
  20. DGM News
  21. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 7.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.111058/html
Scroll to top button