Effect of Second Phase Particles on the Grain Size of a Multi-microalloyed Medium Carbon Steel
-
José María Cabrera
, Anas Al Omar und José Manuel Prado
Abstract
An experimental study on the grain growth of a medium carbon microalloyed steel with two levels of aluminum nitride (AlN) is carried out. Two types of precipitates (V-Ti carbonitrides and AlN) are expected in the alloys selected. The effect of both particles on the final grain size is analyzed, and special emphasis is given to the appearance of abnormal grain growth. The dependence of the volume fraction of particles and of their size on time and temperature is theoretically derived according to simplified models. The particle sizes are also experimentally determined and contrasted with the latter theoretical approaches. Classical models of grain growth control are compared and that proposed by Rios proportionates the best agreement with experimental results. The effect of the heating rate, i. e. overprecipitation, is also qualitatively included in the analysis.
-
Authors are indebted to Prof. Paulo R. Rios (Universidade Federal Fluminense, Rio de Janeiro) for his kind reading of this manuscript. One of the authors (JMC) is grateful for a grant for researchers formation provided by the Comissionat per a Universitats i Recerca de la Generalitat de Catalunya, Spain. The assistance provided by Miss Eva Vaqué (ETSEIB-UPC, Barcelona) in the metallographic preparation of the samples is also recognized, as well as the assistance in the Electronic Microscopy Service of the UPC provided by Dr. José M. Manero. Authors also acknowledge the financial support received from Comisién Interministerial de Ciencia y Tecnología (CICYT) through the project MAT 94-0433.
Literature
1 Smith, C.S.: Personal communication from C. Zener to C.S. Smith, quoted in page 47. Transactions AIME. 175 (1948) 15–51.Suche in Google Scholar
2 Hillert, M.: Acta metall. 13 (1965) 227–238.10.1016/0001-6160(65)90200-2Suche in Google Scholar
3 Gladman, T.: Proc. Royal Soc. 294 (1966) 298–309.Suche in Google Scholar
4 Rios, P.R.: Acta metall. 35 (1987) 2805–2814.10.1016/0001-6160(87)90280-XSuche in Google Scholar
5 Proc. Information Day on Microalloyed Engineering Steels, Carbon and Steel European Community (CSEC), Düsseldorf (1988).Suche in Google Scholar
6 Hara, H.; Kobayashi, M.: Vanadium Award, The Institute of Metals, London (1987) 5–15.Suche in Google Scholar
7 Heimendahl, M.v.: Electron Microscopy of Materials, Academic Press, New York (1980).Suche in Google Scholar
8 Cabrera, J.M.: Doctoral Thesis, Universidad Politécnica de Cataluña, Barcelona, Spain (1995).Suche in Google Scholar
9 Cotterill, P.; Mould, P.R.: Recrystallization and Grain Growth in Metals, Surrey Univ. Press, London (1976).Suche in Google Scholar
10 Ralph, R.: Mater. Sci. and Techn. 6 (1990) 1139–1144.10.1179/mst.1990.6.11.1136Suche in Google Scholar
11 Russ, J.C.: Practical Stereology, Plenium Press, New York (1986).10.1007/978-1-4899-3533-5Suche in Google Scholar
12 Underwood, E.: Quantitative Stereology, Addison-Wesley, Massachusetts, (1970).Suche in Google Scholar
13 Gladman, T.: Mater. Sci. Forum 94–96 (1992) 113–128.10.4028/www.scientific.net/MSF.94-96.113Suche in Google Scholar
14 Coladas, R.; Masounave, J.; Guérin, G.; Baïlon, J.P.: Metal Science, (1977) 509–516.10.1179/030634577790432857Suche in Google Scholar
15 Cuddy, L.J.; Raley, J.C.: Metall. Trans. A 14A (1983) 1989–1995.10.1007/BF02662366Suche in Google Scholar
16 Shams, N.: Mater. Sci. Techn. 1 (1985) 950–953.10.1179/mst.1985.1.11.950Suche in Google Scholar
17 Wang, S.: J. Mater. Sc. 24 (1989) 105–109.10.1007/BF00660940Suche in Google Scholar
18 Reynolds, P.E.: Ironmaking and Steelmaking 8 (1991) 52–58.Suche in Google Scholar
19 Kaspar, R.; Mahmoud, N.: Mater. Sci. Techn. 7 (1991) 249–254.10.1179/mst.1991.7.3.249Suche in Google Scholar
20 Cabrera, J.M.; Al Omar, A.; Prado, J.M.: J. Mater. Sci. 31 (1996) 1303–1309.10.1007/BF00353110Suche in Google Scholar
21 Chen, Z.; Loretto, M.H.; Cochrane, R.C.: Mater. Sci. Techn. 3 (1987) 836–844.10.1179/mst.1987.3.10.836Suche in Google Scholar
22 Emenike, C.O.I.; Billington, J.C.: Mater. Sci. Techn. 5 (1989) 450–456.10.1179/mst.1989.5.5.450Suche in Google Scholar
23 Emenike, C.O.I.; Billington, J.C: Mater. Sci. Techn. 5 (1989) 566–574.10.1179/mst.1989.5.6.566Suche in Google Scholar
24 El-Fawakhry, K.A.; Mekkawy, M.F.; Mishreky, M.L.; Eissa, M.M.: ISIJ International 31 (1991) 1020–1025.10.2355/isijinternational.31.1020Suche in Google Scholar
25 Jonas, J.J.; Akben, M.G.: Metals Forum 4 (1981) 92–101.Suche in Google Scholar
26 Chen, Z.; Loretto, M.H.; Cochrane, R.C.: Mater. Sci. Techn. 3 (1987) 836–844.10.1179/mst.1987.3.10.836Suche in Google Scholar
27 Zou, H.; Kirkaldy, J.S.: Metall. Trans. A 23A (1992) 651–657.10.1007/BF02801182Suche in Google Scholar
28 Liu, W.L.; Jonas, J.J.: Metall. Trans. A 20A, (1989) 1361–1374.10.1007/BF02665494Suche in Google Scholar
29 Handbook of Chemistry and Physics, CRC Press, Florida (1973).Suche in Google Scholar
30 Speer, J.G.; Michael, J.R.; Hansen, S.S.: Metall. Trans. A 18A (1987) 211–222.10.1007/BF02825702Suche in Google Scholar
31 Adrian, H.: Mater. Sci. Techn. 8 (1992) 406–420.10.1179/mst.1992.8.5.406Suche in Google Scholar
32 Adrian, H.; Pickering, F.B.: Mater. Sci. Techn. 7 (1991) 176–182.10.1179/mst.1991.7.2.176Suche in Google Scholar
33 Rios, P.R.: Mater. Sci. Techn. 4 (1988) 324–327.10.1179/mst.1988.4.4.324Suche in Google Scholar
34 Rios, P.R.: Mater. Sci. Engn. A142 (1991) 87–94.10.1016/0921-5093(91)90757-ESuche in Google Scholar
35 Rios, P.R.: Scripta metall. mater. 33 (1995) 337–339.10.1016/0956-716X(95)00199-6Suche in Google Scholar
36 Houghton, D.C.: Acta metall. 41 (1993) 2293–3006.10.1016/0956-7151(93)90114-8Suche in Google Scholar
37 Rios, P.R.: Mater. Sci. Engn. A156 (1992) L5–L8.10.1016/0921-5093(92)90423-XSuche in Google Scholar
38 Hillert, M.; Staffanson, L.I.: Acta Chemica Scandinavica 24 (1970) 3618–3626.10.3891/acta.chem.scand.24-3618Suche in Google Scholar
39 Wilson, F.G.; Gladman, T.: Intern. Mater. Rev. 33 (1988) 221–286.10.1179/imr.1988.33.1.221Suche in Google Scholar
40 Kunze, J.: Metal Science 16 (1982) 217–218.Suche in Google Scholar
41 Lifshitz, L.M.; Slyozov, V.V.: J. Phys. Chem. Solids 19 (1961) 35–50.10.1016/0022-3697(61)90054-3Suche in Google Scholar
42 Ardell, A.J.: Acta metall. 20 (1972) 61–71.10.1016/0001-6160(72)90114-9Suche in Google Scholar
43 DeHoff, R.T.: Acta metall. 39 (1991) 2349–2359.10.1016/0956-7151(91)90016-TSuche in Google Scholar
44 Das, S.K.; Biswas, A.; Ghosh R.N.: Acta metall. 41 (1993) 777–781.10.1016/0956-7151(93)90010-PSuche in Google Scholar
45 Fang, Z.; Patterson, B.R.; Turner, M.E.: Acta metall. 40 (1992) 713–722.10.1016/0956-7151(92)90013-5Suche in Google Scholar
46 Fang, Z.; Patterson, B.R.:Acta metall. 41 (1993) 2017–2024.10.1016/0956-7151(93)90372-YSuche in Google Scholar
47 Rios, P.R.: Mater. Sci. Engn. A171 (1993) 175–179.10.1016/0921-5093(93)90404-3Suche in Google Scholar
48 Ashby, M.F.; Easterling, K.E.: Acta metall. 30 (1982) 1969–1978.10.1016/0001-6160(82)90100-6Suche in Google Scholar
49 Ion, J.C.; Easterling, K.E.; Ashby, M.F.: Acta metall. 32 (1984) 1949–1962.10.1016/0001-6160(84)90176-7Suche in Google Scholar
50 Andersen, I.; Grong, Ø.: Acta metall. mater. 43 (1995) 2673–2688.10.1016/0956-7151(94)00488-4Suche in Google Scholar
51 Andersen, I.; Grong, Ø.; Ryum, N.: Acta metall. mater. 43 (1995) 2689–2700.10.1016/0956-7151(94)00489-5Suche in Google Scholar
52 Landolt-Börnstein, Numerical Data and Functional Relationships in Science and Technology, Vol. 26, Diffusion in Solid Metals and Alloys, Springer Verlag, Berlin (1990).Suche in Google Scholar
53 Zou, H.; Kirkaldy, J.S.: Metall. Trans. A 22A (1991) 1511–1524.10.1007/BF02667365Suche in Google Scholar
54 Liu, W.L.; Jonas, J.J.: Int. Conference on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals (Thermec-88), Tokyo, (1988).Suche in Google Scholar
55 Elst, R.; Van Humbeeck, J.; Delay, L.: Acta metall. 36 (1988) 1723–1729.10.1016/0001-6160(88)90240-4Suche in Google Scholar
© 1998 Carl Hanser Verlag, München
Artikel in diesem Heft
- Frontmatter
- Editorial
- Editorial
- Aufsätze
- Thermodynamic Investigations of the System Ge–Sn–Te
- The Amorphous Metallic Al91La5Ni4 Alloy: Kinetics of Crystallization
- Crystallization of As-quenched and Hydrogenated CU50Ti40Al10 Amorphous Alloy
- Structure and Ordering in Cu–Si and Ni–Si Molten Alloys
- Rasterelektronenmikroskopische und röntgenanalytische Gefügeuntersuchungen von Al- und Si-legiertem Gußeisen mit Kugel-und Vermiculargraphit
- The Influence of Carbon on the Discontinuous Precipitation Reaction in a Co-15 wt.% Mo Alloy
- Solute Distribution Analysis in Directionally Solidified Al-5.7 wt.% Ni Eutectic Alloy
- Effect of Second Phase Particles on the Grain Size of a Multi-microalloyed Medium Carbon Steel
- In-situ Beobachtung der thermo- und spannungsinduzierten martensitischen Phasenumwandlung
- Hinweise für autoren
- Instructions to authors
- Mitteilungen der Deutschen Gesellschaft für Materialkunde e.V.
- Personen
- Veranstaltungen
- Terminkalender
Artikel in diesem Heft
- Frontmatter
- Editorial
- Editorial
- Aufsätze
- Thermodynamic Investigations of the System Ge–Sn–Te
- The Amorphous Metallic Al91La5Ni4 Alloy: Kinetics of Crystallization
- Crystallization of As-quenched and Hydrogenated CU50Ti40Al10 Amorphous Alloy
- Structure and Ordering in Cu–Si and Ni–Si Molten Alloys
- Rasterelektronenmikroskopische und röntgenanalytische Gefügeuntersuchungen von Al- und Si-legiertem Gußeisen mit Kugel-und Vermiculargraphit
- The Influence of Carbon on the Discontinuous Precipitation Reaction in a Co-15 wt.% Mo Alloy
- Solute Distribution Analysis in Directionally Solidified Al-5.7 wt.% Ni Eutectic Alloy
- Effect of Second Phase Particles on the Grain Size of a Multi-microalloyed Medium Carbon Steel
- In-situ Beobachtung der thermo- und spannungsinduzierten martensitischen Phasenumwandlung
- Hinweise für autoren
- Instructions to authors
- Mitteilungen der Deutschen Gesellschaft für Materialkunde e.V.
- Personen
- Veranstaltungen
- Terminkalender