Artikel
Lizenziert
Nicht lizenziert
Erfordert eine Authentifizierung
Theoretical and Experimental Investigations into Screws for Extruding Polypropylene
-
H. Peiffer
Veröffentlicht/Copyright:
27. Mai 2013
Abstract
In the processing of polypropylene via a melt, the extruder exerts an important influence on product quality. Trials were carried out on production extruders with the aim of improving melt quality. As an aid to evaluating the screws, a computer model was developed which could simulate extruders. This model is described in the first part of this paper. In the second part, the computer model is tested using experimental data taken from a range of different extruders. The comparisons illustrate the excellent correlation and hence validity of the model. On the basis of these results, recommendations are given for the optimization of single-screw extruders.
Received: 1993-3-8
Accepted: 1993-8-18
Published Online: 2013-05-27
Published in Print: 1994-05-01
© 1994, Carl Hanser Verlag, Munich
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Artikel in diesem Heft
- Contents
- Contents
- Editorial
- Tenth in a Series: Cincinnati Milacron
- Screw Extrusion and Mixing
- Theoretical and Experimental Investigations into Screws for Extruding Polypropylene
- Flow Visualization and Residence Time Distributions in a Modular Co-rotating Twin Screw Extruder
- Influence of the Thermomechanical Parameters on the Morphology of a Polyamide (PA 6) and Polypropylene Blend
- Die Extrusion
- Cooling and Wall Thickness Uniformity in Plastic Pipe Manufacture
- Fiber and Film
- Melt Spinning Effects on Optical and Mechanical Properties of Poly(Aryl Sulfone)
- High-Speed, Non-Isothermal Fiber Spinning
- Effect of the Cast Film Production Process on the Properties of Oriented Polypropylene Film
- Molding
- Finite Element Simulation of Thick Tube Expansions
- Flexural Modulus of Compression Molded Glass Fiber Reinforced Thermoplastics
- Short Glass Fiber Reinforced PA 6 and ABS Blends
Artikel in diesem Heft
- Contents
- Contents
- Editorial
- Tenth in a Series: Cincinnati Milacron
- Screw Extrusion and Mixing
- Theoretical and Experimental Investigations into Screws for Extruding Polypropylene
- Flow Visualization and Residence Time Distributions in a Modular Co-rotating Twin Screw Extruder
- Influence of the Thermomechanical Parameters on the Morphology of a Polyamide (PA 6) and Polypropylene Blend
- Die Extrusion
- Cooling and Wall Thickness Uniformity in Plastic Pipe Manufacture
- Fiber and Film
- Melt Spinning Effects on Optical and Mechanical Properties of Poly(Aryl Sulfone)
- High-Speed, Non-Isothermal Fiber Spinning
- Effect of the Cast Film Production Process on the Properties of Oriented Polypropylene Film
- Molding
- Finite Element Simulation of Thick Tube Expansions
- Flexural Modulus of Compression Molded Glass Fiber Reinforced Thermoplastics
- Short Glass Fiber Reinforced PA 6 and ABS Blends
