Home Tenth in a Series: Cincinnati Milacron
Article
Licensed
Unlicensed Requires Authentication

Tenth in a Series: Cincinnati Milacron

Premier American/International Machinery Manufacturer
Published/Copyright: May 27, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 9 Issue 2

Published Online: 2013-05-27
Published in Print: 1994-05-01

© 1994, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Tenth in a Series: Cincinnati Milacron
  5. Screw Extrusion and Mixing
  6. Theoretical and Experimental Investigations into Screws for Extruding Polypropylene
  7. Flow Visualization and Residence Time Distributions in a Modular Co-rotating Twin Screw Extruder
  8. Influence of the Thermomechanical Parameters on the Morphology of a Polyamide (PA 6) and Polypropylene Blend
  9. Die Extrusion
  10. Cooling and Wall Thickness Uniformity in Plastic Pipe Manufacture
  11. Fiber and Film
  12. Melt Spinning Effects on Optical and Mechanical Properties of Poly(Aryl Sulfone)
  13. High-Speed, Non-Isothermal Fiber Spinning
  14. Effect of the Cast Film Production Process on the Properties of Oriented Polypropylene Film
  15. Molding
  16. Finite Element Simulation of Thick Tube Expansions
  17. Flexural Modulus of Compression Molded Glass Fiber Reinforced Thermoplastics
  18. Short Glass Fiber Reinforced PA 6 and ABS Blends
https://doi.org/10.3139/217.940098

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Tenth in a Series: Cincinnati Milacron
  5. Screw Extrusion and Mixing
  6. Theoretical and Experimental Investigations into Screws for Extruding Polypropylene
  7. Flow Visualization and Residence Time Distributions in a Modular Co-rotating Twin Screw Extruder
  8. Influence of the Thermomechanical Parameters on the Morphology of a Polyamide (PA 6) and Polypropylene Blend
  9. Die Extrusion
  10. Cooling and Wall Thickness Uniformity in Plastic Pipe Manufacture
  11. Fiber and Film
  12. Melt Spinning Effects on Optical and Mechanical Properties of Poly(Aryl Sulfone)
  13. High-Speed, Non-Isothermal Fiber Spinning
  14. Effect of the Cast Film Production Process on the Properties of Oriented Polypropylene Film
  15. Molding
  16. Finite Element Simulation of Thick Tube Expansions
  17. Flexural Modulus of Compression Molded Glass Fiber Reinforced Thermoplastics
  18. Short Glass Fiber Reinforced PA 6 and ABS Blends
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 1.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/217.940098/html
Scroll to top button