Startseite Study of Solid-plug Conveying in a Centrifugal Extruder
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Study of Solid-plug Conveying in a Centrifugal Extruder

  • Z. Jing , W. Daming , I. M. Kuzyayev , C. Weihong , X. Hong und L. Ying
Veröffentlicht/Copyright: 26. März 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Polymer Processing
Aus der Zeitschrift International Polymer Processing Band 23 Heft 3

Abstract

A new type of polymer processing machine, a centrifugal extruder, is introduced and its performance studied experimentally and analyzed theoretically. Calculations show that by means of appropriate choice of the geometrical parameters of the rotor drum and the rotor speed, the pressure of the solid polymer in the rotor drum can reach a value of several MPa. Theoretical analysis also shows that the most important factors influencing the solid conveying pressure in the rotor drum are the radius and slope angle of the rotor drum, the rotation speed of the rotor drum, the friction factor between the solid polymer and the drum surface, and the density of the polymer. An experimental rotor drum was designed in order to validate the mathematical model used for calculation of the solid conveying pressure in the rotor drum. The results of the experiments show good agreement with the theoretical predictions.

∗ Mail address: Wu Daming, Institute of Plastics Machinery and Engineering, Beijing University of Chemical Technology, 15 Beisanhuan East Road, Chaoyang District, Beijing, 100029, PRC. E-mail:

References

Chisholm, D. S., U.S. Patent 3 358 323 (1967)Suche in Google Scholar

Chisholm, D. S., U.S. Patent 3 409 712 (1968)Suche in Google Scholar

Chisholm, D. S., U.S. Patent 3 483 281 (1969)10.1136/bmj.3.5673.783-aSuche in Google Scholar

Chisholm, D. S., U.S. Patent 3 912 799 (1975)Suche in Google Scholar

Chisholm, D. S., Dawson, D. H., U.S. Patent 4 050 874 (1967)Suche in Google Scholar

Konishi, M., U.S. Patent 6 783 708 (2004)10.1093/alrr/2004.1.783Suche in Google Scholar

Lenk, E., U.S. Patent 5 075 063 (1991)Suche in Google Scholar

Zhu, F. H.: Extrusion Theory and Application, 1st Edition, Beijing Light Industry Publishing House, Beijing (2001)Suche in Google Scholar

Published Online: 2013-03-26
Published in Print: 2008-07-01

© 2008, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. 10.3139/217.0979
  5. Polymer Plastication during Injection Molding
  6. Polymer Plastication during Injection Molding
  7. Challenges to the Formation of Nano-cells in Foaming Processes
  8. Manufacture of Spinnerets for Synthetic Micro-fibers by LIGA and Micro-injection Molding Technique
  9. Study of Solid-plug Conveying in a Centrifugal Extruder
  10. Experimental Study on the Sliding Friction and Wear Characteristics of Roller Burnished Polymers
  11. Studying the Effective Thermal Properties of Solids in Extrusion Machinery using a Discrete Particle Simulation Approach
  12. Polymer-ridge Waveguide Fabrication by Gas-assisted UV Embossing with a Soft Mold
  13. Rheological Behavior of Immiscible PS/PMMA Blends during Dynamic Plasticating Extrusion
  14. Rapid Fabrication of Microstructures onto Plastic Substrates by Infrared Hot Embossing
  15. Design of Calibrators for Profile Extrusion – Optimizing Multi-step Systems
  16. Inhibition of Thermal Oxidation Destruction of PBT/HDPE Blends by Organic Compounds of Five-valent Phosphorus
  17. Non-isothermal Model for the Drive Power Calculation of Single-screw Plasticating Units
  18. PPS News
  19. PPS News
  20. Seikei-Kakou Abstracts
  21. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.2102

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. 10.3139/217.0979
  5. Polymer Plastication during Injection Molding
  6. Polymer Plastication during Injection Molding
  7. Challenges to the Formation of Nano-cells in Foaming Processes
  8. Manufacture of Spinnerets for Synthetic Micro-fibers by LIGA and Micro-injection Molding Technique
  9. Study of Solid-plug Conveying in a Centrifugal Extruder
  10. Experimental Study on the Sliding Friction and Wear Characteristics of Roller Burnished Polymers
  11. Studying the Effective Thermal Properties of Solids in Extrusion Machinery using a Discrete Particle Simulation Approach
  12. Polymer-ridge Waveguide Fabrication by Gas-assisted UV Embossing with a Soft Mold
  13. Rheological Behavior of Immiscible PS/PMMA Blends during Dynamic Plasticating Extrusion
  14. Rapid Fabrication of Microstructures onto Plastic Substrates by Infrared Hot Embossing
  15. Design of Calibrators for Profile Extrusion – Optimizing Multi-step Systems
  16. Inhibition of Thermal Oxidation Destruction of PBT/HDPE Blends by Organic Compounds of Five-valent Phosphorus
  17. Non-isothermal Model for the Drive Power Calculation of Single-screw Plasticating Units
  18. PPS News
  19. PPS News
  20. Seikei-Kakou Abstracts
  21. Seikei-Kakou Abstracts
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 25.9.2025 von https://www.degruyterbrill.com/document/doi/10.3139/217.2102/html
Button zum nach oben scrollen