Skip to main content
Article
Licensed
Unlicensed Requires Authentication

Contents

Published/Copyright: March 26, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 23 Issue 3

Published Online: 2013-03-26
Published in Print: 2008-07-01

© 2008, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. 10.3139/217.0979
  5. Polymer Plastication during Injection Molding
  6. Polymer Plastication during Injection Molding
  7. Challenges to the Formation of Nano-cells in Foaming Processes
  8. Manufacture of Spinnerets for Synthetic Micro-fibers by LIGA and Micro-injection Molding Technique
  9. Study of Solid-plug Conveying in a Centrifugal Extruder
  10. Experimental Study on the Sliding Friction and Wear Characteristics of Roller Burnished Polymers
  11. Studying the Effective Thermal Properties of Solids in Extrusion Machinery using a Discrete Particle Simulation Approach
  12. Polymer-ridge Waveguide Fabrication by Gas-assisted UV Embossing with a Soft Mold
  13. Rheological Behavior of Immiscible PS/PMMA Blends during Dynamic Plasticating Extrusion
  14. Rapid Fabrication of Microstructures onto Plastic Substrates by Infrared Hot Embossing
  15. Design of Calibrators for Profile Extrusion – Optimizing Multi-step Systems
  16. Inhibition of Thermal Oxidation Destruction of PBT/HDPE Blends by Organic Compounds of Five-valent Phosphorus
  17. Non-isothermal Model for the Drive Power Calculation of Single-screw Plasticating Units
  18. PPS News
  19. PPS News
  20. Seikei-Kakou Abstracts
  21. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.0832

Articles in the same Issue

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. 10.3139/217.0979
  5. Polymer Plastication during Injection Molding
  6. Polymer Plastication during Injection Molding
  7. Challenges to the Formation of Nano-cells in Foaming Processes
  8. Manufacture of Spinnerets for Synthetic Micro-fibers by LIGA and Micro-injection Molding Technique
  9. Study of Solid-plug Conveying in a Centrifugal Extruder
  10. Experimental Study on the Sliding Friction and Wear Characteristics of Roller Burnished Polymers
  11. Studying the Effective Thermal Properties of Solids in Extrusion Machinery using a Discrete Particle Simulation Approach
  12. Polymer-ridge Waveguide Fabrication by Gas-assisted UV Embossing with a Soft Mold
  13. Rheological Behavior of Immiscible PS/PMMA Blends during Dynamic Plasticating Extrusion
  14. Rapid Fabrication of Microstructures onto Plastic Substrates by Infrared Hot Embossing
  15. Design of Calibrators for Profile Extrusion – Optimizing Multi-step Systems
  16. Inhibition of Thermal Oxidation Destruction of PBT/HDPE Blends by Organic Compounds of Five-valent Phosphorus
  17. Non-isothermal Model for the Drive Power Calculation of Single-screw Plasticating Units
  18. PPS News
  19. PPS News
  20. Seikei-Kakou Abstracts
  21. Seikei-Kakou Abstracts
Downloaded on 16.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/217.0832/html
Scroll to top button