Artikel
Lizenziert
Nicht lizenziert
Erfordert eine Authentifizierung
Phase relationships in the Ce–Nd–B system at 773 K
-
Xuehong Cui
Veröffentlicht/Copyright:
23. Februar 2021
Abstract
Phase relationships in the Ce-Nd-B ternary system at 773 K were investigated by means of X-ray diffraction and scanning electron microscopy with energy dispersive X-ray spectroscopy techniques. Six borides, i. e. CeB4, CeB6, NdB4, NdB6, NdB66 and Nd2B5 are confirmed in this work. No ternary compound was observed. CeB4 and NdB4 were discovered to form the continuous solid solution phase (Ce,Nd)B4, CeB6 and NdB6 also form the solid solution phase (Ce,Nd)B6. The maximum solid solubility of Ce in (Ce,Nd)2B5 phase is 46.5 at.%. The isothermal section of the Ce-Nd-B ternary system at 773 K consists of 3 three-phase regions, 7 two-phase regions and 7 single- phase regions.
Published Online: 2021-02-23
Published in Print: 2020-06-01
© 2020 by Walter de Gruyter Berlin/Boston
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Artikel in diesem Heft
- CONTENTS
- Original Contributions
- Accurate estimation of DLC thin film hardness using genetic programming
- Effects of graphene on the microstructure and properties of MAO coatings formed on AA7050
- Influence of nanostructured Cu on the mechanical properties of Cu–MWCNTs composites
- Effect of NbC on the microstructure, mechanical properties, and oxidation resistance of Ti(C,N)-based cermets
- Evolution of microstructure and wear-friction behavior of W-30 wt.% Cu nanocomposite produced via a mechanochemical synthesis route
- Comparison of the strengthening effects of Nb, V, and Ti on the mechanical properties of 20MnSi low-alloy steel
- Effects of Zn content on surface deformability and corrosion resistance of MgZnMnCa alloys
- Experimental investigation on low cycle fatigue properties of Ni-based alloy with single hole
- Phase relationships in the Ce–Nd–B system at 773 K
- Notifications
- Erratum
- DGM
- CONFERENCES
- Imprint
Artikel in diesem Heft
- CONTENTS
- Original Contributions
- Accurate estimation of DLC thin film hardness using genetic programming
- Effects of graphene on the microstructure and properties of MAO coatings formed on AA7050
- Influence of nanostructured Cu on the mechanical properties of Cu–MWCNTs composites
- Effect of NbC on the microstructure, mechanical properties, and oxidation resistance of Ti(C,N)-based cermets
- Evolution of microstructure and wear-friction behavior of W-30 wt.% Cu nanocomposite produced via a mechanochemical synthesis route
- Comparison of the strengthening effects of Nb, V, and Ti on the mechanical properties of 20MnSi low-alloy steel
- Effects of Zn content on surface deformability and corrosion resistance of MgZnMnCa alloys
- Experimental investigation on low cycle fatigue properties of Ni-based alloy with single hole
- Phase relationships in the Ce–Nd–B system at 773 K
- Notifications
- Erratum
- DGM
- CONFERENCES
- Imprint
