Startseite Steady state creep in a rotating composite disc of variable thickness
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Steady state creep in a rotating composite disc of variable thickness

  • Dharmpal Deepak , Vinay K. Gupta und Ashok K. Dham
Veröffentlicht/Copyright: 31. Mai 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 101 Heft 6

Abstract

The steady state creep in a rotating disc having variable thickness and made of isotropic aluminium–silicon carbide particulate composite has been investigated. Using threshold stress based creep law, the general expressions for stresses and strain rates in the discs have been obtained. The expressions are used to calculate the distributions of stresses and strain rates in different discs viz (i) disc having constant thickness (ii) disc having linearly varying thickness and (iii) disc having hyperbolically varying thickness. The volume of different discs is kept the same. The study revealed that the stresses and strain rates in the disc could be reduced to a significant extent by varying the disc profile. The linearly varying disc exhibits the lowest values of stresses and strain rates compared to those observed in hyperbolic or uniform thickness disc.

Keywords: Modelling; Creep; Aluminium matrix composite; Rotating disc; Variable thickness
* Correspondence address, Dr. Vinay Kumar Gupta, Reader, Department of Mechanical Engineering, University College of Engineering, Punjabi University, Patiala-147002, India, Tel.: +91 175 228 0166, Fax: +91 175 304 6333, E-mail:

References

[1] S.B.Singh, S.Ray: Mechanics of Materials.34 (2002) 363. 10.1016/S0167-6636(02)00132-1Suche in Google Scholar

[2] L.H.You, X.Y.You, J.J.Zhang, J.Li: Z. angew. Math. Phys.58 (2007) 1068. 10.1007/s00033-007-5094-2Suche in Google Scholar

[3] V.K.Gupta, S.B.Singh, H.N.Chandrawat, S.Ray: J. of Engg. Mater. Tech.127 (2005) 97. 10.1115/1.1839187Suche in Google Scholar

[4] M.H.Hojjati, A.Hassani: Int. J. of Pressure Vessels and Piping.85 (2008) 694. 10.1016/j.ijpvp.2008.02.010Suche in Google Scholar

[5] M.Bayat, M.Saleem, B.B.Sahari, A.M.S.Hakouda, E.Mahdi: Mech. Res.35 (2008) 283. 10.1016/j.mechrescom.2008.02.007Suche in Google Scholar

[6] B.Farshi, J.Bidabadi: Int. J. of Pressure Vessels and Piping.85 (2008) 507. 10.1016/j.ijpvp.2008.01.008Suche in Google Scholar

[7] M.Laskaj, B.Murphy, K.Houngan: Improving the efficiency of cooling the front disc brake on a V8 racing car. Project report, Monash University, Melbourne (1999).Suche in Google Scholar

[8] B.Farshi, H.Jahed, A.Mehrabian: Comp. Struct.82 (2004) 773. 10.1016/j.compstruc.2004.02.005Suche in Google Scholar

[9] V.K.Gupta, N.Kwatra, S.Ray: Engg. Comp. Int. J. for Computer Aided Engineering and Software.24 (2007) 151. 10.1108/02644400710729545Suche in Google Scholar

[10] T.G.Nieh: Metall. Trans. A15 (1984) 139.10.1007/BF02644396Suche in Google Scholar

[11] T.G.Nieh, K.Xia, T.G.Langdon: J. of Engg. Mater. Tech.110 (1988) 77. 10.1115/1.3226033Suche in Google Scholar

[12] V.K.Gupta, S.B.Singh, H.N.Chandrawat, S.Ray: Europ. J. of Mech. A/Solids.23 (2004) 335. 10.1016/j.euromechsol.2003.11.005Suche in Google Scholar

[13] U.Guven, A.Celik: Mech. Res. Communications.28 (2001) 271.10.1016/S0093-6413(01)00173-2Suche in Google Scholar

[14] Y.Orcan, A.N.Eraslan: Mech. Res. Communications.29 (2002) 269. 10.1016/S0093-6413(02)00261-6Suche in Google Scholar

[15] B.M.Ma: J. of the Franklin Inst.269 (1960) 408. 10.1016/0016-0032(60)90174-5Suche in Google Scholar

[16] B.M.Ma: J. of the Franklin Inst.271 (1961) 40. 10.1016/S0016-0032(61)91014-6Suche in Google Scholar

[17] N.S.Bhatnagar, P.S.Kulkarni, V.K.Arya: Nuclear Engg. Design.91 (1986) 121. 10.1016/0029-5493(86)90200-1Suche in Google Scholar

[18] S.C.Tjong, Z.Y.Ma: Mater. Sci. Engg., R: Report.29 (2000) 49. 10.1016/S0927-796X(00)00024-3Suche in Google Scholar

[19] R.S.Mishra, A.B.Pandey: Metall. Trans. A21 (1990) 2089.10.1007/BF02647258Suche in Google Scholar

[20] A.B.Pandey, R.S.Mishra, Y.R.Mahajan: Acta Metall. Mater.40 (1992) 2045. 10.1016/0956-7151(92)90190-PSuche in Google Scholar

[21] G.Gonzalez-Doncel, O.D.Sherby: Acta Metall Mater.41 (1993) 2797. 10.1016/0956-7151(93)90094-9Suche in Google Scholar

[22] A.B.Pandey, R.S.Mishra, Y.R.Mahajan: Mater. Sci. Engg. A189 (1994) 95.10.1016/0921-5093(94)90405-7Suche in Google Scholar

[23] K.T.Park, E.J.Lavernia, F.A.Mohamed: Acta Metall Mater.38 (1990) 2149. 10.1016/0956-7151(90)90082-RSuche in Google Scholar

[24] F.A.Mohamed, K.T.Park, E.J.Lavernia: Mater. Sci Engg. A150 (1992) 21.10.1016/0921-5093(90)90004-MSuche in Google Scholar

[25] K.T.Park, F.A.Mohamed: Metall. Trans. A26 (1995) 3119.10.1007/BF02669441Suche in Google Scholar

[26] J.Cadek, H.Oikawa, V.Sustek: Mater. Sci. Engg. A190 (1995) 9.10.1016/0921-5093(94)09605-VSuche in Google Scholar

[27] H.Yoshioka, Y.Suzumura, J.Cadek, S.J.Zhu, K.Milicka: Mater. Sci. Engg. A248 (1998) 65.10.1016/S0921-5093(98)00518-8Suche in Google Scholar

[28] Y.Li, F.A.Mohamed: Acta Mater.45 (1997) 4775. 10.1016/S1359-6454(97)00130-4Suche in Google Scholar

[29] Y.Li, T.G.Langdon: Acta Mater.45 (1997) 4797. 10.1016/S1359-6454(97)00132-8Suche in Google Scholar

[30] Y.Li, T.G.Langdon: Mater. Sci. Eng. A265 (1999) 276.10.1016/S0921-5093(98)01131-9Suche in Google Scholar

[31] R.Lagneborg, B.Bergman: Metal Sci.10 (1976) 20.10.1179/030634576790431462Suche in Google Scholar

[32] S.P.Timoshenko, J.N.Goodier: Theory of Elasticity, McGraw-Hill, Singapore (1970).Suche in Google Scholar

[33] A.M.Wahl, G.O.Sankey, M.J.Manjoine, E.Shoemaker: J. of Appl. Mech.21 (1954) 225.Suche in Google Scholar

Received: 2009-2-28
Accepted: 2009-11-13
Published Online: 2013-05-31
Published in Print: 2010-06-01

© 2010, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. IJMR's most downloaded papers from 2008 to the present: a review
  5. Basic
  6. Effect of temperature and strain rate on strain hardening and deformation mechanisms of high manganese austenitic steels
  7. Size effects resulting from local strain hardening; microstructural evaluation of Fe-3% Si and Cu deformed in tension and deep drawing using orientation gradient mapping (OGM)
  8. Microstructure of super-austenitic steels after long-term annealing
  9. Investigation of tensile–compressive yield asymmetry and the role of deformation twin in extruded pure magnesium
  10. Neutron diffraction study on liquid Al–Ni alloys
  11. Investigation of the atomic structure of molten As–Se alloys using X-ray diffraction
  12. A theoretical approach to the elastic behaviour of compact and hollow spherical particles reinforced metal-matrix composites
  13. Applied
  14. Adsorption of nucleotides on the rutile (110) surface
  15. Effect of cyclic heat treatment on the microstructures and mechanical properties of Ti–Si alloys
  16. Deleterious phases resulting from the induction bending of thick-walled super-duplex pipework
  17. Steady state creep in a rotating composite disc of variable thickness
  18. Influence of data conversion methods from torsion tests on the Garofalo equation parameters for a high nitrogen steel
  19. High-alloy ferritic cast irons with different graphite microstructures for exhaust manifolds and turbocharger housings
  20. Microstructure and mechanical properties of friction stir butt welded dissimilar pure copper/brass alloy plates
  21. The heat capacity measurements of CoSb3-based Skutterudite compounds
  22. DGM News
  23. DGM News
https://doi.org/10.3139/146.110335
Schlagwörter für diesen Artikel
Modelling; Creep; Aluminium matrix composite; Rotating disc; Variable thickness

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. IJMR's most downloaded papers from 2008 to the present: a review
  5. Basic
  6. Effect of temperature and strain rate on strain hardening and deformation mechanisms of high manganese austenitic steels
  7. Size effects resulting from local strain hardening; microstructural evaluation of Fe-3% Si and Cu deformed in tension and deep drawing using orientation gradient mapping (OGM)
  8. Microstructure of super-austenitic steels after long-term annealing
  9. Investigation of tensile–compressive yield asymmetry and the role of deformation twin in extruded pure magnesium
  10. Neutron diffraction study on liquid Al–Ni alloys
  11. Investigation of the atomic structure of molten As–Se alloys using X-ray diffraction
  12. A theoretical approach to the elastic behaviour of compact and hollow spherical particles reinforced metal-matrix composites
  13. Applied
  14. Adsorption of nucleotides on the rutile (110) surface
  15. Effect of cyclic heat treatment on the microstructures and mechanical properties of Ti–Si alloys
  16. Deleterious phases resulting from the induction bending of thick-walled super-duplex pipework
  17. Steady state creep in a rotating composite disc of variable thickness
  18. Influence of data conversion methods from torsion tests on the Garofalo equation parameters for a high nitrogen steel
  19. High-alloy ferritic cast irons with different graphite microstructures for exhaust manifolds and turbocharger housings
  20. Microstructure and mechanical properties of friction stir butt welded dissimilar pure copper/brass alloy plates
  21. The heat capacity measurements of CoSb3-based Skutterudite compounds
  22. DGM News
  23. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 17.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110335/html
Button zum nach oben scrollen