Startseite Oxidation behavior of 29Cr-8Ni ferritic stainless steel in air flow at 1173 and 1273 K
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Oxidation behavior of 29Cr-8Ni ferritic stainless steel in air flow at 1173 and 1273 K

  • Chaiyud Aranchaiya , Anchaleeporn W. Lothongkum und Gobboon Lothongkum
Veröffentlicht/Copyright: 26. September 2019
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Materials Testing
Aus der Zeitschrift Materials Testing Band 61 Heft 10

Abstract

This work investigates the isothermal oxidation behavior of as casted 29Cr-8Ni ferritic stainless steel at 1173 and 1273 K for 126 ks at an air flow rate of 0.67 cm3 × s−1 using thermogravimetric analysis (TGA). The oxidation resistance at both temperatures was similar. At 1173 and 1273 K, the kinetic mechanisms were cubic: between parabolic and logarithmic, and parabolic, respectively. The oxidation kinetic constants k at 1173 and 1273 K were 1.648 × 10−4 and 8.152 × 10−4 g × cm−2 × s−1, respectively. The exponential growth rates n at 1173 and 1273 K were 0.3093 and 0.5692, respectively. The oxidation behavior of 29Cr-8Ni ferritic stainless steel was discussed and compared with that of as casted 26Cr-16Ni and as casted AISI 309 austenitic stainless steel.

∗Correspondence Address, Prof. Dr.-Ing. Gobboon Lothongkum, Department of Metallurgical Engineering, Faculty of Engineering, Chulalongkorn University, Patumwan, Bangkok 10330, Thailand, E-mail:

Chaiyud Aranchaiya, born in 1991, is a graduate student at the Department of Metallurgical Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok, Thailand. He received his Bachelor's degree in Materials Engineering and Nanotechnology from Silpakorn University, Nakhon Pathom, Thailand in 2015.

Assoc. Prof. Dr. Anchaleeporn W. Lothongkum, D. Eng. (Kyoto University), born in 1961, is an Associate Professor at the Department of Chemical Engineering, Faculty of Engineering, King Mongkut's University of Technology Ladkrabang, Bangkok, Thailand. She was the President of Thai Institute of Chemical Engineering and Applied Chemistry (TIChE) from 2013 to 2017. She is also the Chair Person of Chemical Engineering & Petrochemicals, the Engineering Institute of Thailand under H. M. The King's Patronage from 2014 to 2019. Her expertise is catalysis reaction engineering, chemical engineering, and safety engineering.

Prof. Dr.-Ing. Gobboon Lothongkum, born in 1960, is Professor and a member of the Innovative Metals Research Unit, Department of Metallurgical Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok, Thailand. He has been serving as Head of the Department since 2015. He received his Dr.-Ing. degree at the Helmut-Schmidt-University/University of the Federal Armed Force Hamburg, Germany and the International Welding Engineer Certificate of the International Institute of Welding in 1994 and 2006, respectively. His areas of expertise include corrosion of metals and alloys, welding and metal joining, stainless steel and high temperature materials.

References

1 J. R.Davis: ASM Specialty Handbook: Heat-Resistant Materials, ASM International, Materials Park, Ohio, USA (1997)Suche in Google Scholar

2 F. B.Pickering (Ed.): The Metallurgical Evolution of Stainless Steels, American Society for Metals, Ohio, USA (1979)Suche in Google Scholar

3 A. S.Khanna: Introduction to High Temperature Oxidation and Corrosion, ASM International, Materials Park, Ohio, USA (2002)Suche in Google Scholar

4 Y.Inoue, M.Kikuchi: Present and Future Trends of Stainless Steel for Automotive Exhaust System (Review), Nippon Steel Technical Report88 (2003), pp. 62–69Suche in Google Scholar

5 G. E.Totten: Stainless Steel Heat Treatment Handbook, 2nd Ed., Taylor and Francis Group, London, UK (2007)10.1201/9781482293029Suche in Google Scholar

6 G.Pavapootanont, P.Wongpanya. E.Viyanit, G.Lothongkum: Corrosion behavior of Ni steels in aerated 3.5-wt.% NaCl solution at 25°C by potentiodynamic method, Engineering Journal22 (2018), No. 4, pp. 1–1210.4186/ej.2018.22.4.1.Suche in Google Scholar

7 NabeelAlharthi, El-Sayed M.Sherif, Hany S.Abdo, S.Zein El Abedin: Effect of nickel content on the corrosion resistance of iron-nickel alloys in concentrated Hydrochloric Acid Pickling Solutions, Advances in Materials Science and Engineering (2017), No. 7, pp. 1–810.1155/2017/1893672.Suche in Google Scholar

8 S. R. J.Saunders, M.Monteiro and F.Rizzo: The oxidation behaviour of metals and alloys at high temperatures in atmospheres containing water vapour, Progress in Materials Science53 (2008), No. 5, pp. 775–83710.1016/j.pmatsci.2007.11.001Suche in Google Scholar

9 O. T.Goncel, D. P.Whittle, J.Stringer: The oxidation behaviour of austenitic Fe-Cr-Ni alloys containing dispersed phases, Corrosion Science19 (1979), No. 5, pp. 305–32010.1016/0010-938X(79)90023-4Suche in Google Scholar

10 K. H.Lo, C. H.Shek, J. K. L.Lai: Recent developments in stainless steels, Materials Science and Engineering Reports65 (2009), No. 4-6, pp. 39–10410.1016/j.mser.2009.03.001.Suche in Google Scholar

11 H.Hoffmeister, G.Lothongkum: Effects of chemical composition of duplex stainless steels on microstructure and pitting corrosion after solution heat treatment and various weld simulation cooling cycles, Welding in the World33 (1994), No. 2, pp. 91–96Suche in Google Scholar

12 P.Pipatnukun, P.Wangyao, G.Lothongkum: Oxidation behavior of 26Cr 16Ni and AISI 309 austenitic stainless steels in air flow at 1,173 K, Materials Testing57 (2015), pp. 597–60110.3139/120.110753.Suche in Google Scholar

13 N.Birks, G. H.Meier, F.Pettit: Introduction to High Temperature Oxidation of Metals, Cambridge University Press, Cambridge, UK (2006)10.1017/CBO9781139163903Suche in Google Scholar

14 F.Toscan, L.Antoni, Y.Wouters, M.Dupeux, A.Galerie: Oxidation kinetics and scale spallation of iron-chromium alloys with different titanium contents, Materials Science Forum461-464 (2004), pp. 705–71210.4028/www.scientific.net/MSF.461-464.705Suche in Google Scholar

15 P.Kofstad, C.Steidel: High temperature oxidation of metals, Journal of the Electrochemical Society114 (1967), No. 7, pp. 167C–172C10.1149/1.2426698.Suche in Google Scholar

16 N. N.: Manual of the Thermo-Calc Software, Solna, Sweden (2018)Suche in Google Scholar

Published Online: 2019-09-26
Published in Print: 2019-10-02

© 2019, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Inhalt/Contents
  2. Contents
  3. Fachbeiträge/Technical Contributions
  4. Stability of structured sheet metals during buckling
  5. Oxidation behavior of 29Cr-8Ni ferritic stainless steel in air flow at 1173 and 1273 K
  6. Microstructure and mechanical properties of friction stir welded dissimilar 5754-H111-6013-T6 aluminum alloy joints
  7. Investigation of heterogeneous ratcheting of a GTAW welded joint for primary coolant piping
  8. Determination of the modulus of linearity of acrylic bases and acrylic teeth
  9. Effect of temperature related processing parameters on the interface bonding strength of automotive overmolding injection parts
  10. Design, fabrication and vibration analysis of a lightweight head expander for a high frequency electrodynamic shaker
  11. Influence factors of pop-in in the nanoindentation micromechanical property measurement of gas-bearing shale
  12. Setup for testing the vibration-based loosening of pre-loaded bolted joints
  13. Influence of graphene oxide on the static and dynamic mechanical behavior of compatibilized polypropylene nanocomposites
  14. Influence of the moisture state of recycled fine aggregate on the impermeability of concrete
  15. Mechanical properties of 16 different FDM-plastic types
  16. Effects of various vitamin C amounts on the green synthesis of reduced graphene oxide
  17. Validation of the dynamic response of the HMA layer in an inverted pavement measured by strain foils
https://doi.org/10.3139/120.111405

Artikel in diesem Heft

  1. Inhalt/Contents
  2. Contents
  3. Fachbeiträge/Technical Contributions
  4. Stability of structured sheet metals during buckling
  5. Oxidation behavior of 29Cr-8Ni ferritic stainless steel in air flow at 1173 and 1273 K
  6. Microstructure and mechanical properties of friction stir welded dissimilar 5754-H111-6013-T6 aluminum alloy joints
  7. Investigation of heterogeneous ratcheting of a GTAW welded joint for primary coolant piping
  8. Determination of the modulus of linearity of acrylic bases and acrylic teeth
  9. Effect of temperature related processing parameters on the interface bonding strength of automotive overmolding injection parts
  10. Design, fabrication and vibration analysis of a lightweight head expander for a high frequency electrodynamic shaker
  11. Influence factors of pop-in in the nanoindentation micromechanical property measurement of gas-bearing shale
  12. Setup for testing the vibration-based loosening of pre-loaded bolted joints
  13. Influence of graphene oxide on the static and dynamic mechanical behavior of compatibilized polypropylene nanocomposites
  14. Influence of the moisture state of recycled fine aggregate on the impermeability of concrete
  15. Mechanical properties of 16 different FDM-plastic types
  16. Effects of various vitamin C amounts on the green synthesis of reduced graphene oxide
  17. Validation of the dynamic response of the HMA layer in an inverted pavement measured by strain foils
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 22.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/120.111405/html
Button zum nach oben scrollen