Startseite Enhancement of the tribological and thermal properties of UHMWPE based ternary nanocomposites containing graphene and titanium titride
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Enhancement of the tribological and thermal properties of UHMWPE based ternary nanocomposites containing graphene and titanium titride

  • Uwa O. Uyor EMAIL logo , Abimbola P. I. Popoola und Olawale M. Popoola
Veröffentlicht/Copyright: 12. Dezember 2023
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Journal of Polymer Engineering
Aus der Zeitschrift Journal of Polymer Engineering Band 44 Heft 1

Abstract

Ultra-high molecular weight polyethylene (UHMWPE) generally does not have high resistance to wear and are characterised by poor thermal stability when exposed to long working condition. To address these shortcomings, this study used hybrid graphene nanoplatelets (GN) and titanium nitride (TiN) nanoparticles to significantly enhance the wear resistance and thermal stability of UHMWPE. The nanocomposites were prepared by solvent mixing and hot compression process. Scanning electron microscope showed uniform dispersion of the nanoparticles in the UHMWPE matrix. The developed UHMWPE showed improved wear resistance and thermal stability relative to the pure UHMWPE. For instance, the wear rate reduced from 6.7 × 10−3 mm3 N−1 m−1 and 3.67 × 10−2 mm3 N−1 m−1 for pure UHMWPE to 2.687 × 10−5 mm3 N−1 m−1 and 1.34 × 7 × 10−4 mm3 N−1 m−1 for UHMWPE–2 wt% GN–10 wt% TiN at applied loads of 10 N and 20 N respectively. This is about 100 % increment in wear resistance at the respective applied loads compared to the pure UHMWPE. The thermal stability of the fabricated nanocomposites was studied using the thermogravimetric analyser (TGA). The addition of nanoparticles significantly reduced the thermal decomposition of UHMWPE matrix. The enhanced properties of the UHMWPE–GN–TiN nanocomposites may be attributed to the network structures formed from the dispersion of the GN and TiN nanoparticles in the UHMWPE matrix with promoted molecular chains interlocking.

Keywords: UHMWPE; TiN; GN; thermal and tribological properties
Corresponding author: Uwa O. Uyor, Department of Chemical, Metallurgical and Materials Engineering, Tshwane University of Technology, Private Bag X680, Pretoria, South Africa; and Center for Energy and Electrical Power, Tshwane University of Technology, Private Bag X680, Pretoria, South Africa, E-mail:

Acknowledgements

We appreciate the Faculty of Engineering and the Built Environment and the Centre for Energy and Electric Power, Tshwane University of Technology, South Africa for their support.

  1. Research ethics: This work does not include humans and animal, hence does not require ethical approval from any committee.

  2. Author contributions: Uwa O. Uyor: Conceptualization, Methodology, Investigation, Formal analysis, Writing Original Draft and Project Administration. Abimbola P. I. Popoola: Supervision, Funding Acquisition, Review and Editing and Validation. Olawale M. Popoola: Supervision, Funding Acquisition, Resources and Methodology.

  3. Competing interests: There is no conflict of interest to be declared in this study.

  4. Research funding: No funding was received to assist with the preparation of this manuscript.

  5. Data availability: The authors confirm that the data supporting the findings of this study are available within the article.

References

1. Ashfaq, A., Clochard, M.-C., Coqueret, X., Dispenza, C., Driscoll, M. S., Ulański, P., Al-Sheikhly, M. Polymerization reactions and modifications of polymers by ionizing radiation. Polymers 2020, 12, 2877; https://doi.org/10.3390/polym12122877.Suche in Google Scholar PubMed PubMed Central

2. Sun, W., Liu, W., Wu, Z., Chen, H. Chemical surface modification of polymeric biomaterials for biomedical applications. Macromol. Rapid Commun. 2020, 41, 1900430; https://doi.org/10.1002/marc.201900430.Suche in Google Scholar PubMed

3. Ojogbo, E., Ogunsona, E., Mekonnen, T. Chemical and physical modifications of starch for renewable polymeric materials. Mater. Today Sustain. 2020, 7, 100028; https://doi.org/10.1016/j.mtsust.2019.100028.Suche in Google Scholar

4. Luo, S., Zeng, Z., Wang, H., Xiong, W., Song, B., Zhou, C., Duan, A., Tan, X., He, Q., Zeng, G., Liu, Z., Xiao, R. Recent progress in conjugated microporous polymers for clean energy: synthesis, modification, computer simulations, and applications. Prog. Polym. Sci. 2021, 115, 101374; https://doi.org/10.1016/j.progpolymsci.2021.101374.Suche in Google Scholar

5. Boutaleb, N., Dahou, F. Z., Djelad, H., Sabantina, L., Moulefera, I., Benyoucef, A. Facile synthesis and electrochemical characterization of polyaniline@ TiO2-CuO ternary composite as electrodes for supercapacitor applications. Polymers 2022, 14, 4562; https://doi.org/10.3390/polym14214562.Suche in Google Scholar PubMed PubMed Central

6. Chan, J. X., Wong, J. F., Petrů, M., Hassan, A., Nirmal, U., Othman, N., Ilyas, R. A. Effect of nanofillers on tribological properties of polymer nanocomposites: a review on recent development. Polymers 2021, 13, 2867; https://doi.org/10.3390/polym13172867.Suche in Google Scholar PubMed PubMed Central

7. Guo, Y., Ruan, K., Shi, X., Yang, X., Gu, J. Factors affecting thermal conductivities of the polymers and polymer composites: a review. Compos. Sci. Technol. 2020, 193, 108134; https://doi.org/10.1016/j.compscitech.2020.108134.Suche in Google Scholar

8. Myshkin, N., Kovalev, A. Adhesion and friction of polymers and polymer composites. In Handbook of Polymer Tribology; World Scientific Publishing Co Pte Ltd: Singapore, 2018; pp. 3–45.10.1142/9789813227798_0001Suche in Google Scholar

9. Kennedy, F., Currier, B., Van Citters, D., Currier, J., Collier, J., Mayor, M. Oxidation of ultra-high molecular weight polyethylene and its influence on contact fatigue and pitting of knee bearings. Tribol. Trans. 2003, 46, 111–118; https://doi.org/10.1080/10402000308982607.Suche in Google Scholar

10. Hussain, M., Naqvi, R. A., Abbas, N., Khan, S. M., Nawaz, S., Hussain, A., Zahra, N., Khalid, M. W. Ultra-high-molecular-weight-polyethylene (UHMWPE) as a promising polymer material for biomedical applications: a concise review. Polymers 2020, 12, 323; https://doi.org/10.3390/polym12020323.Suche in Google Scholar PubMed PubMed Central

11. Gupta, A., Fidan, I., Hasanov, S., Nasirov, A. Processing, mechanical characterization, and micrography of 3D-printed short carbon fiber reinforced polycarbonate polymer matrix composite material. Int. J. Adv. Des. Manuf. Technol. 2020, 107, 3185–3205; https://doi.org/10.1007/s00170-020-05195-z.Suche in Google Scholar

12. Uyor, U. O., Popoola, P. A., Popoola, O. M. Network structural hardening of polypropylene matrix using hybrid of 0d, 1d and 2d carbon-ceramic nanoparticles with enhanced mechanical and thermomechanical properties. J. Polym. Eng. 2022, 42, 520–534; https://doi.org/10.1515/polyeng-2021-0216.Suche in Google Scholar

13. Aguiar, V. O., Maru, M. M., Soares, I. T., Kapps, V., Almeida, C. M., Perez, G., Archanjo, B. S., Pita, V. J., Marques, M. d. F. V. Effect of incorporating multi-walled carbon nanotube and graphene in UHMWPE matrix on the enhancement of thermal and mechanical properties. J. Mater. Sci. 2022, 57, 21104–21116; https://doi.org/10.1007/s10853-022-07959-2.Suche in Google Scholar

14. Sansotera, M., Marona, V., Marziani, P., Dintcheva, N. T., Morici, E., Arrigo, R., Bussetti, G., Navarrini, W., Magagnin, L. Flexible perfluoropolyethers-functionalized cnts-based UHMWPE composites: a study on hydrogen evolution, conductivity and thermal stability. Materials 2022, 15, 6883; https://doi.org/10.3390/ma15196883.Suche in Google Scholar PubMed PubMed Central

15. Sarath Kumar, P., Sai Narendra Reddy, K., Unnikrishnan, D., Balachandran, M. Performance enhancement of UHMWPE with surface functionalized multiwalled carbon nanotubes/graphite. In Structural Integrity Assessment: Proceedings of ICONS 2018; Springer: Singapore, 2020; pp. 231–240.10.1007/978-981-13-8767-8_19Suche in Google Scholar

16. Wu, L., Zhang, Z., Yang, M., Yuan, J., Li, P., Guo, F., Men, X. Mulberry-like carbon spheres decorated with uio-66-nh2 for enhancing the mechanical and tribological performances of UHMWPE composites. Tribol. Int. 2020, 141, 105916; https://doi.org/10.1016/j.triboint.2019.105916.Suche in Google Scholar

17. Liu, C.-Y., Ishigami, A., Kurose, T., Ito, H. Wear resistance of graphene reinforced ultra-high molecular weight polyethylene nanocomposites prepared by octa-screw extrusion process. Composites, Part B 2021, 215, 108810; https://doi.org/10.1016/j.compositesb.2021.108810.Suche in Google Scholar

18. Sanes, J., Sánchez, C., Pamies, R., Avilés, M.-D., Bermúdez, M.-D. Extrusion of polymer nanocomposites with graphene and graphene derivative nanofillers: an overview of recent developments. Materials 2020, 13, 549; https://doi.org/10.3390/ma13030549.Suche in Google Scholar PubMed PubMed Central

19. Martínez-Morlanes, M., Pascual, F., Guerin, G., Puértolas, J. Influence of processing conditions on microstructural, mechanical and tribological properties of graphene nanoplatelet reinforced UHMWPE. J. Mech. Behav. Biomed. Mater. 2021, 115, 104248; https://doi.org/10.1016/j.jmbbm.2020.104248.Suche in Google Scholar PubMed

20. Hussain, O., Sheikh, S. S., Ahmad, B. Fabrication and tribological behavior of novel UHMWPE/vitamin-c/graphene nanoplatelets based hybrid composite for joint replacement. Ind. Lubr. Tribol. 2022, 74, 956–963; https://doi.org/10.1108/ilt-02-2021-0033.Suche in Google Scholar

21. Chen, X., Zhang, S., Zhang, L., Zhu, P., Zhang, G. Design and characterization of the surface porous UHMWPE composite reinforced by graphene oxide. Polymers 2021, 13, 482; https://doi.org/10.3390/polym13040482.Suche in Google Scholar PubMed PubMed Central

22. Çolak, A., Göktaş, M., Mindivan, F. Effect of reduced graphene oxide amount on the tribological properties of UHMWPE biocomposites under water-lubricated conditions. SN Appl. Sci. 2020, 2, 375; https://doi.org/10.1007/s42452-020-2179-4.Suche in Google Scholar

23. Namdev, A., Purohit, R., Telang, A. Impact of graphene nano particles on tribological behaviour of carbon fibre reinforced composites. Adv. Mater. Process. Technol. 2023, 1–18; https://doi.org/10.1080/2374068x.2023.2189670.Suche in Google Scholar

24. Saad, N. A., Obaid, M. N. The synergetic effect of short fibers of pan and nanoparticles (gnp/hap) on tribological behavior and surface roughness of UHMWPE. Test Eng. Manag. 2020, 83, 22000–22012.Suche in Google Scholar

25. Huang, P., Zhu, R., Li, C., Wang, X., Wang, X., Zhang, X. Effect of graphene concentration on tribological properties of graphene aerogel/tio2 composite through controllable cellular-structure. Mater. Des. 2020, 188, 108468; https://doi.org/10.1016/j.matdes.2020.108468.Suche in Google Scholar

26. Khalaj, M., Zarabi Golkhatmi, S., Alem, S. A. A., Baghchesaraee, K., Hasanzadeh Azar, M., Angizi, S. Recent progress in the study of thermal properties and tribological behaviors of hexagonal boron nitride-reinforced composites. J. Compos. Sci. 2020, 4, 116; https://doi.org/10.3390/jcs4030116.Suche in Google Scholar

27. Vidakis, N., Mangelis, P., Petousis, M., Mountakis, N., Papadakis, V., Moutsopoulou, A., Tsikritzis, D. Mechanical reinforcement of abs with optimized nano titanium nitride content for material extrusion 3D printing. Nanomaterials 2023, 13, 669; https://doi.org/10.3390/nano13040669.Suche in Google Scholar PubMed PubMed Central

28. Wu, H., Chou, T., Mishra, A., Anderson, D., Lampert, J., Gujrathi, S. Characterization of titanium nitride thin films. Thin Solid Films 1990, 191, 55–67; https://doi.org/10.1016/0040-6090(90)90274-h.Suche in Google Scholar

29. Santecchia, E., Hamouda, A., Musharavati, F., Zalnezhad, E., Cabibbo, M., Spigarelli, S. Wear resistance investigation of titanium nitride-based coatings. Ceram. Int. 2015, 41, 10349–10379; https://doi.org/10.1016/j.ceramint.2015.04.152.Suche in Google Scholar

30. Wolfe, D., Singh, J. Microstructural evolution of titanium nitride (tin) coatings produced by reactive ion beam-assisted, electron beam physical vapor deposition (riba, eb-pvd). J. Mater. Sci. 1999, 34, 2997–3006.Suche in Google Scholar

31. Vidakis, N., Petousis, M., Mountakis, N., Korlos, A., Papadakis, V., Moutsopoulou, A. Trilateral multi-functional polyamide 12 nanocomposites with binary inclusions for medical grade material extrusion 3D printing: the effect of titanium nitride in mechanical reinforcement and copper/cuprous oxide as antibacterial agents. J. Funct. Biomater. 2022, 13, 115; https://doi.org/10.3390/jfb13030115.Suche in Google Scholar PubMed PubMed Central

32. Chen, B., Li, X., Jia, Y., Xu, L., Liang, H., Li, X., Yang, J., Li, C., Yan, F. Fabrication of ternary hybrid of carbon nanotubes/graphene oxide/mos2 and its enhancement on the tribological properties of epoxy composite coatings. Composites, Part A 2018, 115, 157–165; https://doi.org/10.1016/j.compositesa.2018.09.021.Suche in Google Scholar

33. Li, S., Li, X., Deng, Q., Li, D. Three kinds of charcoal powder reinforced ultra-high molecular weight polyethylene composites with excellent mechanical and electrical properties. Mater. Des. 2015, 85, 54–59; https://doi.org/10.1016/j.matdes.2015.06.163.Suche in Google Scholar

34. Mamidi, N., Gamero, M. R. M., Castrejón, J. V., Zúníga, A. E. Development of ultra-high molecular weight polyethylene-functionalized carbon nano-onions composites for biomedical applications. Diamond Relat. Mater. 2019, 97, 107435; https://doi.org/10.1016/j.diamond.2019.05.020.Suche in Google Scholar

35. Guo, Q., Xie, Y., Wang, X., Lv, S., Hou, T., Bai, C. Synthesis of uniform titanium nitride nanocrystalline powders via a reduction–hydrogenation–dehydrogenation–nitridation route. J. Am. Ceram. Soc. 2005, 88, 249–251; https://doi.org/10.1111/j.1551-2916.2004.00050.x.Suche in Google Scholar

36. Tang, S., Cheng, Q., Zhao, J., Liang, J., Liu, C., Lan, Q., Cao, Y.-C., Liu, J. Preparation of titanium nitride nanomaterials for electrode and application in energy storage. Results Phys. 2017, 7, 1198–1201; https://doi.org/10.1016/j.rinp.2017.03.006.Suche in Google Scholar

37. Rashad, M., Pan, F., Asif, M., Chen, X. Corrosion behavior of magnesium-graphene composites in sodium chloride solutions. J. Magnesium Alloys 2017, 5, 271–276; https://doi.org/10.1016/j.jma.2017.06.003.Suche in Google Scholar

38. Ilyas, S. U., Ridha, S., Kareem, F. A. A. Dispersion stability and surface tension of sds-stabilized saline nanofluids with graphene nanoplatelets. Colloids Surf., A 2020, 592, 124584; https://doi.org/10.1016/j.colsurfa.2020.124584.Suche in Google Scholar

39. Maniadi, A., Vamvakaki, M., Suchea, M., Tudose, I. V., Popescu, M., Romanitan, C., Pachiu, C., Ionescu, O. N., Viskadourakis, Z., Kenanakis, G., Koudoumas, E. Effect of graphene nanoplatelets on the structure, the morphology, and the dielectric behavior of low-density polyethylene nanocomposites. Materials 2020, 13, 4776; https://doi.org/10.3390/ma13214776.Suche in Google Scholar PubMed PubMed Central

40. da Silva Chagas, N. P., de Oliveira Aguiar, V., da Costa Garcia Filho, F., da Silva Figueiredo, A. B.-H., Monteiro, S. N., Huaman, N. R. C., Marques, M. d. F. V. Ballistic performance of boron carbide nanoparticles reinforced ultra-high molecular weight polyethylene (UHMWPE). J. Mater. Res. Technol. 2022, 17, 1799–1811; https://doi.org/10.1016/j.jmrt.2022.01.104.Suche in Google Scholar

41. Danilova, S. N., Yarusova, S. B., Kulchin, Y. N., Zhevtun, I. G., Buravlev, I. Y., Okhlopkova, A. A., Gordienko, P. S., Subbotin, E. P. UHMWPE/casio3 nanocomposite: mechanical and tribological properties. Polymers 2021, 13, 570; https://doi.org/10.3390/polym13040570.Suche in Google Scholar PubMed PubMed Central

42. Uyor, U. O., Popoola, A., Popoola, O., Aigbodion, V. S. Nanomechanical evaluation of poly (vinylidene fluoride) nanocomposites reinforced with hybrid graphene nanoplatelets and titanium dioxide. Polym. Bull. 2021, 79, 2345–2361; https://doi.org/10.1007/s00289-021-03604-1.Suche in Google Scholar

43. Nurul, M., Mariatti, M. Effect of thermal conductive fillers on the properties of polypropylene composites. J. Thermoplast. Compos. Mater. 2013, 26, 627–639; https://doi.org/10.1177/0892705711427345.Suche in Google Scholar

44. Yetgin, S. H. Effect of multi walled carbon nanotube on mechanical, thermal and rheological properties of polypropylene. J. Mater. Res. Technol. 2019, 8, 4725–4735; https://doi.org/10.1016/j.jmrt.2019.08.018.Suche in Google Scholar

45. Aliyu, I. K., Mohammed, A. S. Wear and corrosion resistance performance of UHMWPE/gnps nanocomposite coatings on aa2028 al alloys. Prog. Org. Coat. 2021, 151, 106072; https://doi.org/10.1016/j.porgcoat.2020.106072.Suche in Google Scholar

46. Dike, A. S., Mindivan, F., Mindivan, H. Mechanical and tribological performances of polypropylene composites containing multi-walled carbon nanotubes. Int. J. Surf. Sci. Eng. 2014, 8, 292–301; https://doi.org/10.1504/ijsurfse.2014.065831.Suche in Google Scholar

47. Mertens, A. J., Senthilvelan, S. Mechanical and tribological properties of carbon nanotube reinforced polypropylene composites. J. Mater.: Des. Appl. 2018, 232, 669–680; https://doi.org/10.1177/1464420716642620.Suche in Google Scholar

48. Min, C., Liu, D., Shen, C., Zhang, Q., Song, H., Li, S., Shen, X., Zhu, M., Zhang, K. Unique synergistic effects of graphene oxide and carbon nanotube hybrids on the tribological properties of polyimide nanocomposites. Tribol. Int. 2018, 117, 217–224; https://doi.org/10.1016/j.triboint.2017.09.006.Suche in Google Scholar
Received: 2023-07-30
Accepted: 2023-11-15
Published Online: 2023-12-12
Published in Print: 2024-01-29

© 2023 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Frontmatter
  2. Material Properties
  3. Research progress of metal organic framework materials in anti-corrosion coating
  4. Effect of gamma irradiation on tensile, thermal and wettability properties of waste coffee grounds reinforced HDPE composites
  5. Morphologies, structures, and properties on blends of triblock copolymers and linear low-density polyethylene
  6. Enhancement of the tribological and thermal properties of UHMWPE based ternary nanocomposites containing graphene and titanium titride
  7. Preparation and Assembly
  8. Preparation and property evaluation of poly(ε-caprolactone)/polylactic acid/perlite biodegradable composite film
  9. Engineering and Processing
  10. Predictive maintenance feasibility assessment based on nonreturn valve wear of injection molding machines
  11. Quality monitoring of injection molding based on TSO-SVM and MOSSA
  12. Location-controlled crazing in polyethylene using focused electron beams and tensile strain
  13. Annual Reviewer Acknowledgement
  14. Reviewer acknowledgement Journal of Polymer Engineering volume 43 (2023)
https://doi.org/10.1515/polyeng-2023-0182
Schlagwörter für diesen Artikel
UHMWPE; TiN; GN; thermal and tribological properties

Artikel in diesem Heft

  1. Frontmatter
  2. Material Properties
  3. Research progress of metal organic framework materials in anti-corrosion coating
  4. Effect of gamma irradiation on tensile, thermal and wettability properties of waste coffee grounds reinforced HDPE composites
  5. Morphologies, structures, and properties on blends of triblock copolymers and linear low-density polyethylene
  6. Enhancement of the tribological and thermal properties of UHMWPE based ternary nanocomposites containing graphene and titanium titride
  7. Preparation and Assembly
  8. Preparation and property evaluation of poly(ε-caprolactone)/polylactic acid/perlite biodegradable composite film
  9. Engineering and Processing
  10. Predictive maintenance feasibility assessment based on nonreturn valve wear of injection molding machines
  11. Quality monitoring of injection molding based on TSO-SVM and MOSSA
  12. Location-controlled crazing in polyethylene using focused electron beams and tensile strain
  13. Annual Reviewer Acknowledgement
  14. Reviewer acknowledgement Journal of Polymer Engineering volume 43 (2023)
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 23.9.2025 von https://www.degruyterbrill.com/document/doi/10.1515/polyeng-2023-0182/html
Button zum nach oben scrollen