Experimental analysis of resin infusion in air cushion method
-
Chih-Yuan Chang
Abstract
A new technique of resin infusion, called the air cushion method (ACM), has been developed to improve infusion time associated with the vacuum assisted resin transfer molding (VARTM) process. The method utilizes an innovative vacuum bag consisting of a bagging film and air cushions. After the preform is sealed by the bagging film and then evacuated, distribution channels are created between air cushions for flow enhancement during infusion. Once the required volume of resin is infused, the bonding interfaces between the air cushion and the bagging film are punctured and distribution channels collapse. The ambient pressure is applied on the bagging film that entirely compacts the preform. This paper investigates the infusion process in ACM using flow visualization experiments. An approximate estimation of the equivalent permeability of the bulk distribution channel is provided. Finally, an assessment of the properties of the ACM part is performed in comparison with VARTM part.
Acknowledgments
This work was supported by the National Science Council of Republic of China [grant number NSC 100-2221-E-244-016].
References
[1] Kang MK, Lee WI, Hahn HT. Compos. Part A 2001, 32, 1553–1560.10.1016/S1359-835X(01)00012-4Suche in Google Scholar
[2] Lopatnikov S, Simacek P, Gillespie Jr J, Advani SG. Modell. Simul. Mater. Sci. Eng. 2004, 12, S191–S204.10.1088/0965-0393/12/3/S09Suche in Google Scholar
[3] Tackitt KD, Walsh SM. Mater. Manuf. Process 2005, 20, 607–627.10.1081/AMP-200041896Suche in Google Scholar
[4] Joubaud L, Achim V, Trochu F. Polym. Compos. 2005, 26, 417–427.10.1002/pc.20069Suche in Google Scholar
[5] Yenilmez B, Senan M, Sozer E. Compos. Sci. Technol. 2009, 69, 1710–1719.10.1016/j.compscitech.2008.05.009Suche in Google Scholar
[6] Li J, Zhang C, Liang R, Wang B, Walsh S. Polym. Compos. 2008, 29, 473–482.10.1002/pc.20439Suche in Google Scholar
[7] Vila J, Gonzalez C, LLorca J. Compos. A 2014, 67, 299–307.10.1016/j.compositesa.2014.09.002Suche in Google Scholar
[8] Goncharova G, Cosson B, Lagardere MD. J. Mater. Process Technol. 2015, 219, 173–180.10.1016/j.jmatprotec.2014.12.010Suche in Google Scholar
[9] Correia NC, Robitaille F, Long AC, Rudd C. Composites, Part A 2005, 36, 1645–1656.10.1016/j.compositesa.2005.03.019Suche in Google Scholar
[10] Modi D, Johnson M, Long A, Rudd C. Plast. Rubber. Compos. 2007, 36, 101–110.10.1179/174328907X177608Suche in Google Scholar
[11] Chang CY. J. Polym. Eng. 2015, 35, 493–501.10.1515/polyeng-2014-0237Suche in Google Scholar
[12] Han K, Jiang S, Zhang C, Wang B. Compos. Part A 2000, 31, 79–86.10.1016/S1359-835X(99)00053-6Suche in Google Scholar
[13] Dai J, Pellaton D, Hahn HT. Polym. Compos. 2003, 24, 672–685.10.1002/pc.10061Suche in Google Scholar
[14] Mathur R, Heider D, Hoffmann C, Gillespie Jr. JW, Advani SG, Fink BK. Polym. Compos. 2001, 22, 477–490.10.1002/pc.10553Suche in Google Scholar
[15] Hsiao KT, Mathur R, Advani SG, Gillespie JW, Fink BK. Manuf. Sci. Eng. Trans. ASME 2000, 122, 463–475.10.1115/1.1285907Suche in Google Scholar
[16] Dong C. J. Compos. Mater. 2006, 40, 1193–1213.10.1177/0021998305057429Suche in Google Scholar
[17] Johnson RJ, Pitchumani R. Compos. Sci. Technol. 2003, 63, 2201–2215.10.1016/S0266-3538(03)00179-9Suche in Google Scholar
[18] Grujicic M, Chittajallu KM, Walsh S. Appl. Surf. Sci. 2005, 245, 51–64.10.1016/j.apsusc.2004.09.123Suche in Google Scholar
[19] Gascons M, Blanco N, Vives J, Matthys K. J. Reinf. Plast. Compoos. 2011, 30, 1557–1570.10.1177/0731684411423321Suche in Google Scholar
[20] Deleglise M, Binetruy C, Castaing P, Krawczak P. Int. J. Heat Mass Transfer 2007, 50, 2317–2324.10.1016/j.ijheatmasstransfer.2006.10.020Suche in Google Scholar
[21] Ni J, Li S, Sun X, Lee LJ. Polym. Compos. 1998, 19, 818–829.10.1002/pc.10156Suche in Google Scholar
[22] Poodts E, Minak G, Dolcini E, Donati L. Composites, Part B 2013, 53, 179–186.10.1016/j.compositesb.2013.04.064Suche in Google Scholar
[23] Allende M, Mohan RV, Walsh SM. Polym. Compos. 2004, 25, 384–396.10.1002/pc.20032Suche in Google Scholar
[24] Alms J, Advani SG. Composites, Part A 2007, 38, 2131–2141.10.1016/j.compositesa.2007.06.011Suche in Google Scholar
[25] Chang CY. J. Reinf. Plast. Compos. 2012, 31, 1630–1637.10.1177/0731684412440056Suche in Google Scholar
[26] Chang CY. Plast. Rubber Compos. 2015, 44, 162–170.10.1179/1743289815Y.0000000002Suche in Google Scholar
[27] Heider D, Simacek P, Dominauskas A, Deffor H, Advani S, Gillespie Jr JW. Composites, Part A 2007, 38, 525–534.10.1016/j.compositesa.2006.02.016Suche in Google Scholar
[28] Thagard JR, Okoli OI, Liang Z. J. Reinf. Plast. Compos. 2004, 23, 1767–1778.10.1177/0731684404041148Suche in Google Scholar
[29] Li W, Krehl J, Gillespie Jr JW, Heider D, Endrulat M, Hochrein K, Dunham MG, Dubois CJ. J. Compos. Mater. 2004, 38, 1803–1814.10.1177/0021998304044769Suche in Google Scholar
[30] Niggemann C, Young SS, Gillespie JW, Heider D. J. Compos. Mater. 2008, 42, 1049–1061.10.1177/0021998308090650Suche in Google Scholar
[31] Yokozeki T, Kobayashi Y, Aoki T, Yoshida D, Hirata T. Adv. Compos. Mater. 2013, 22, 99–107.10.1080/09243046.2013.777173Suche in Google Scholar
[32] Chang CY, Li SY. J. Reinf. Plast. Compos. 2015, 34, 257–266.10.1177/0731684414568906Suche in Google Scholar
[33] Wu CJ, Hourng LW, Liao JC. J. Reinf. Plast. Compos. 1995, 14, 694–722.10.1177/073168449501400703Suche in Google Scholar
[34] Govignon Q, Bickerton S, Kelly PA. Composites, Part A 2010, 41, 45–57.10.1016/j.compositesa.2009.07.007Suche in Google Scholar
©2016 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Original articles
- Preparation and characterization of graphene oxide/PMMA nanocomposites with amino-terminated vinyl polydimethylsiloxane phase interfaces
- Effect of exfoliated graphite nanoplatelets on thermal and heat deflection properties of kenaf polypropylene hybrid nanocomposites
- Synthesis of spherical porous cross-linked glutaraldehyde/poly(vinyl alcohol) hydrogels
- Influence of process parameters on property of PP/EPDM blends prepared by a novel vane extruder
- Influence of processing conditions on heat sealing behavior and resultant heat seal strength for peelable heat sealing of multilayered polyethylene films
- Thermal degradation kinetics and lifetime of HDPE/PLLA/pro-oxidant blends
- Effect of notch sensitivity on the mechanical properties of HA/PEEK functional gradient biocomposites
- The influence of melt mixing on the stability of cellulose acetate and its carbon nanotube composites
- Experimental analysis of resin infusion in air cushion method
- 3D-MID manufacturing via laser direct structuring with nanosecond laser pulses
Artikel in diesem Heft
- Frontmatter
- Original articles
- Preparation and characterization of graphene oxide/PMMA nanocomposites with amino-terminated vinyl polydimethylsiloxane phase interfaces
- Effect of exfoliated graphite nanoplatelets on thermal and heat deflection properties of kenaf polypropylene hybrid nanocomposites
- Synthesis of spherical porous cross-linked glutaraldehyde/poly(vinyl alcohol) hydrogels
- Influence of process parameters on property of PP/EPDM blends prepared by a novel vane extruder
- Influence of processing conditions on heat sealing behavior and resultant heat seal strength for peelable heat sealing of multilayered polyethylene films
- Thermal degradation kinetics and lifetime of HDPE/PLLA/pro-oxidant blends
- Effect of notch sensitivity on the mechanical properties of HA/PEEK functional gradient biocomposites
- The influence of melt mixing on the stability of cellulose acetate and its carbon nanotube composites
- Experimental analysis of resin infusion in air cushion method
- 3D-MID manufacturing via laser direct structuring with nanosecond laser pulses
