Wear behaviour of glass fiber reinforced polyester composites under dry friction and fluid film lubrication

References

[1] R. B. Seymour and R. D. Deanin, History of Polymeric Composites, 1st ed., Netherlands, VNU Press, 1987.Suche in Google Scholar

[2] B. Jiping, Advanced Fibre-Reinforced Polymer (FRP) Composites for Structural Applications, 1st ed., UK, Woodhead Publishing, 2013.Suche in Google Scholar

[3] A. Bekem, M. Dogu, and A. Unal, “Tensile properties of continuous E-glass and basalt fiber reinforced polypropylene composites,” Mater. Test., vol. 59, no. 1, pp. 11–15, 2017. https://doi.org/10.3139/120.110961.Suche in Google Scholar

[4] S. Bagherpour, “Fibre reinforced polyester composites,” in Polyester, InTech, 2012.10.5772/48697Suche in Google Scholar

[5] K. Rasu and A. Veerabathiran, “Tribological behaviour of industrial waste based agave sisalana/glass fiber reinforced hybrid composites for marine applications,” Mater. Test., vol. 65, no. 4, pp. 593–602, 2023. https://doi.org/10.1515/mt-2022-0431.Suche in Google Scholar

[6] L. Huang, R. Hou, Y. Liu, and Q. Shang, “Effects of mixed acid solution on bromide epoxy vinyl ester and its glass fiber reinforced composites,” Mater. Test., vol. 63, no. 3, pp. 203–208, 2021. https://doi.org/10.1515/mt-2020-0031.Suche in Google Scholar

[7] S. Prashanth, K. M. Subbaya, K. Nithin, and S. Sachhidananda, “Fiber reinforced composites – a review,” J. Mater. Sci. Eng., vol. 6, no. 3, pp. 1–6, 2017. https://doi.org/10.4172/2169-0022.1000341.Suche in Google Scholar

[8] S. J. Park and M. K. Seo, Interface Science and Technology, 1st ed., San Diego, USA, Academic Press, 2011.Suche in Google Scholar

[9] G. Wypych, Handbook of Fillers, 1st ed., Canada, Chem Tec Publishing, 1999.Suche in Google Scholar

[10] E. Feyzullahoğlu, “Effect of different fillers on adhesive wear properties of glass fiber reinforced polyester composites,” Tribol. Ind., vol. 39, no. 4, pp. 482–486, 2017. https://doi.org/10.24874/ti.2017.39.04.07.Suche in Google Scholar

[11] İ. Turkmen and N. S. Koksal, “Investigation of mechanical properties and impact strength depending on the number of fiber layers in glass fiber-reinforced polyester matrix composite materials,” Mater. Test., vol. 56, no. 6, pp. 472–478, 2014. https://doi.org/10.3139/120.110587.Suche in Google Scholar

[12] T. P. Sathishkumar, S. Satheeshkumar, and J. Naveen, “Glass fiber-reinforced polymer composites – a review,” J. Reinf. Plast. Compos., vol. 33, no. 13, pp. 1258–1275, 2014. https://doi.org/10.1177/0731684414530790.Suche in Google Scholar

[13] M. J. Neale, The Tribology Handbook, 2nd ed., Oxford, Butterworth-Heinmann, 1995.Suche in Google Scholar

[14] A. W. Glaeser, Materials for Tribology, 1st ed., Amsterdam, Netherlands, Elsevier Science Publishers, 1992.Suche in Google Scholar

[15] W. G. Stachowiak and W. A. Batchelor, Engineering Tribology, 3rd ed., UK, Butterworth-Heinemann, 2005.Suche in Google Scholar

[16] A. Fischer and K. Bobzin, Friction, Wear and Wear Protection, 1st ed., Germany, Wiley, 2009.10.1002/9783527628513Suche in Google Scholar

[17] R. İlhan and E. Feyzullahoğlu, “The wear of glass fiber reinforced polyester composite materials at different loads and speeds,” El-Cezeri J. Sci. Eng., vol. 1, no. 5, pp. 259–266, 2018. https://doi.org/10.31202/ecjse.370504.Suche in Google Scholar

[18] S Wu, D Gao, Y. Liang, and B. Chen, “Experimental study on influence of dimples on lubrication performance of glass fiber-epoxy resin composite under natural seawater lubrication,” Chin. J. Mech. Eng., vol. 30, pp. 110–117, 2017. https://doi.org/10.3901/CJME.2016.0620.075.Suche in Google Scholar

[19] R. İlhan and E. Feyzullahoğlu, “Investigation of adhesive wear properties of glass fiber reinforced polyester composites having different chemical compositions,” Proc. Inst. Mech. Eng., Part J, vol. 236, no. 1, pp. 156–173, 2022. https://doi.org/10.1177/13506501211005.Suche in Google Scholar

[20] S. Agrawal, K. K. Singh, and P. K. Sarkar, “A comparative study of wear and friction characteristics of glass fibre reinforced epoxy resin, sliding under dry, oil-lubricated and inert gas environments,” Tribol. Int., vol. 96, pp. 217–224, 2015. https://doi.org/10.1016/j.triboint.2015.12.033.Suche in Google Scholar

[21] P. S. Kishore, S. Seetharamu, A. Murali, and R. K. Kumar, “On the SEM features of glass-epoxy composite system subjected todry sliding wear,” Wear, vol. 247, no. 2, pp. 208–213, 2001. https://doi.org/10.1016/S0043-1648(00)00537-8.Suche in Google Scholar

[22] B. F. Yousif and N. S. M. El-Tayeb, “Effect of water as lubricant on friction and wear properties of CGRP composite evaluated by POD and BOR techniques,” Surf. Rev. Lett., vol. 14, no. 2, pp. 185–191, 2007. https://doi.org/10.1142/S0218625X07009244.Suche in Google Scholar

[23] B. F. Yousif, “Design of newly fabricated tribological machine for wear and frictional experiments under dry/wet condition,” Mater. Des., vol. 48, pp. 2–13, 2013. https://doi.org/10.1016/j.matdes.2012.06.046.Suche in Google Scholar

[24] M. Sakthivel, K. Srinivasan, and A. G. G. Kumar, “Wear behavior of sansevieria cylindrica and E-glass reinforced polyester composites,” Mater. Test., vol. 61, no. 3, pp. 239–242, 2019. https://doi.org/10.3139/120.111310.Suche in Google Scholar

[25] E. Feyzullahoğlu, “The investigation of effects of polyester resins and tensile additives on abrasive wear of glass fiber reinforced polyester composites,” in International Science and Technology Conference (ISTEC), Paris, France, 2018, pp. 603–608.Suche in Google Scholar

[26] W. F. Smith, Material Science and Engineering, 3rd ed., USA, Mc Graw-Hill Education, 1993.Suche in Google Scholar

[27] K. G. Garg, “Investigation into mechanical and tribological behaviour of hollow glass microsphere (HGM) reinforced epoxy composite,” Master Thesis, Department of Mechanical Engineering, National Institute of Technology, Rourkela, 2015.Suche in Google Scholar

[28] L. Khoun, R. I. Chaudhuri, and H. Hubert, “Effect of low-profile additives on thermo-mechanical properties of glass fiber reinforced unsaturated polyester composites,” J. Reinf. Plast. Compos., vol. 30, no. 9, pp. 815–823, 2011. https://doi.org/10.1177/0731684411412643.Suche in Google Scholar

[29] M. Venkatesan, K. Palanikumar, and S. R. Boopathy, “Experimental investigation and analysis on the wear properties of glass fiber and CNT reinforced hybrid polymer composites,” Sci. Eng. Compos. Mater., vol. 25, no. 5, pp. 963–974, 2018. https://doi.org/10.1515/secm-2017-0068.Suche in Google Scholar

[30] G. Agarwal, A. Patnaik, and R. K. Sharma, “Parametric optimization and three-body abrasive wear behavior of Sic filled chopped glass fiber reinforced epoxy composites,” Int. J. Compos. Mater., vol. 3, no. 2, pp. 32–38, 2013. https://doi.org/10.5923/j.cmaterials.20130302.02.Suche in Google Scholar

[31] P. Antil, S. Singh, and A. Manna, “Sicp/glass fibers reinforced epoxy composites: wear and erosion behavior,” Indian J. Eng. Mater. Sci., vol. 25, pp. 122–130, 2018. https://doi.org/10.1177/0021998317723448.Suche in Google Scholar

[32] I. Virgil, R. Minodora, A. Gabriel, P. Adriana, S. Cornel, and J. Juliana, “Profilometric evaluation of the worn surfaces under dry reciprocating wear conditions of a composite material to repair brass made parts,” Appl. Mech. Mater., vol. 657, pp. 437–441, 2014. https://doi.org/10.4028/www.scientific.net/AMM.657.437.Suche in Google Scholar

[33] M. Ripa, “Surface roughness parameters evaluation in rolling/sliding wear tests,” Ann. “Dunarea Jos” Univ. Galati, Fascicle VIII, vol. XVI, no. 1, pp. 28–32, 2011.Suche in Google Scholar

[34] L. Tomescu, M. Ripa, E. Vasilescu, and C. Georgescu, “Surface profiles of composites with PTFE matrix,” J. Mater. Process. Technol., vols. 143–144, pp. 384–389, 2003. https://doi.org/10.1016/S0924-0136(03)00405-9.Suche in Google Scholar

[35] M. Ripa, L. Tomescu, M. Hapenciuc, and I. Crudu, “Tribological characterisation of surface topography using Abbott-firestone curve,” in National Tribology Conference ROTRIB’03, Romania, Galati, 2003.Suche in Google Scholar