Startseite High thermal stability effect of vanadium on the binary CuAl base alloy for a novel CuAlV high-temperature shape memory alloy
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

High thermal stability effect of vanadium on the binary CuAl base alloy for a novel CuAlV high-temperature shape memory alloy

  • Oktay Karaduman

    Oktay Karaduman, PhD, is an assistant professor in Munzur University, Rare Earth Elements Application and Research Center, Tunceli, Turkey.

     ORCID logo     , İskender Özkul

    İskender Özkul, PhD, is an associated professor in Mersin University, Department of Mechanical Engineering, Mersin, Turkey.

     ORCID logo EMAIL logo     , Seval Hale Güler

    Seval Hale Güler, PhD, is an associated professor in Munzur University, Rare Earth Elements Application and Research Center, Tunceli, Turkey.

     ORCID logo     und Canan Aksu Canbay

    Canan Aksu Canbay, PhD, is a professor in Firat University, Department of Physics, Faculty of Science, Elazig, Turkey.

     ORCID logo
Veröffentlicht/Copyright: 13. März 2024
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Materials Testing
Aus der Zeitschrift Materials Testing Band 66 Heft 5

Abstract

In this study, two high-temperature shape memory alloys (HTSMAs) of CuAlV with unprecedented chemical compositions were fabricated using the arc melting technique, followed by traditional ice-brine water quenching after the melting process. To characterize the shape memory properties and structure of the alloys, a series of tests including differential calorimetry (DSC and DTA), EDS, optical microscopy, and XRD were conducted. The DSC tests, performed at different heating and cooling rates, demonstrated highly stable reversible martensitic phase transformation peaks at high temperatures, which were also confirmed by the results of DTA tests. Microstructural XRD and optical microscopy tests were conducted at room temperature, revealing the martensitic structure of the alloys in both cases. Based on all the results, the effects of different minor amounts of vanadium additives directly on the CuAlV alloy were discussed.

Keywords: CuAl-based HTSMA; vanadium addition; shape memory effect; martensitic transformation; DSC; DTA
Corresponding author: İskender Özkul, Mersin Universitesi, 33343, Mersin, Türkiye, E-mail:

Funding source: Firat University Scientific Research Projects Unit for this research

Award Identifier / Grant number: project number ADEP-23.03

About the authors

Oktay Karaduman

Oktay Karaduman, PhD, is an assistant professor in Munzur University, Rare Earth Elements Application and Research Center, Tunceli, Turkey.

İskender Özkul

İskender Özkul, PhD, is an associated professor in Mersin University, Department of Mechanical Engineering, Mersin, Turkey.

Seval Hale Güler

Seval Hale Güler, PhD, is an associated professor in Munzur University, Rare Earth Elements Application and Research Center, Tunceli, Turkey.

Canan Aksu Canbay

Canan Aksu Canbay, PhD, is a professor in Firat University, Department of Physics, Faculty of Science, Elazig, Turkey.

  1. Research ethics: This study does not include human subjects, human data or tissue, or animals.

  2. Author contributions: All authors contributed with equal efforts.

  3. Competing interests: The authors have no any competing interest.

  4. Research funding: Firat University Scientific Research Projects Unit for this research through the project number ADEP-23.03.

  5. Data availability: The data that support the findings of this study are already given in the paper.

References

[1] V. G. Pushin, N. N. Kuranova, A. E. Svirid, A. N. Uksusnikov, and Y. M. Ustyugov, “Design and development of high-strength and ductile ternary and multicomponent eutectoid Cu-based shape memory alloys: problems and perspectives,” Metals, vol. 12, no. 8. MDPI, 2022. https://doi.org/10.3390/met12081289.Suche in Google Scholar

[2] C. A. Canbay and O. Karaduman, “The photo response properties of shape memory alloy thin film based photodiode,” J. Mol. Struct., vol. 1235, p. 130263, 2021, https://doi.org/10.1016/J.MOLSTRUC.2021.130263.Suche in Google Scholar

[3] K. Otsuka and C. M. Wayman, Shape Memory Materials, Cambridge, Cambridge University Press, 1999.Suche in Google Scholar

[4] R. Dasgupta, “A look into Cu-based shape memory alloys: present scenario and future prospects,” J. Mater. Res., vol. 29, no. 16, pp. 1681–1698, 2014, https://doi.org/10.1557/jmr.2014.189.Suche in Google Scholar

[5] S. Najah Saud Al-Humairi, “Cu-based shape memory alloys: modified structures and their related properties,” in Recent Advancements in the Metallurgical Engineering and Electrodeposition, London, IntechOpen, 2020, p. 25.10.5772/intechopen.86193Suche in Google Scholar

[6] E. M. Mazzer, M. R. Da Silva, and P. Gargarella, “Revisiting Cu-based shape memory alloys: recent developments and new perspectives,” J. Mater. Res., vol. 37, pp. 162–182, 2022, https://doi.org/10.1557/s43578-021-00444-7.Suche in Google Scholar

[7] J. S. de Souza, M. C. L. de Oliveira, R. A. Antunes, and R. A. G. da Silva, “Quaternary CuAlMn-based alloys with Gd and Sn additions: surface chemistry and corrosion behavior in sodium chloride solution,” J. Mater. Res. Technol., vol. 16, pp. 1213–1230, 2022, https://doi.org/10.1016/j.jmrt.2021.12.064.Suche in Google Scholar

[8] U. S. Mallik and V. Sampath, “Influence of quaternary alloying additions on transformation temperatures and shape memory properties of Cu–Al–Mn shape memory alloy,” J. Alloys Compd., vol. 469, nos. 1–2, pp. 156–163, 2009, https://doi.org/10.1016/j.jallcom.2008.01.128.Suche in Google Scholar

[9] S. Y. Yang, et al.., “Microstructure, martensitic transformation and shape memory effect of polycrystalline Cu-Al-Mn-Fe alloys,” Sci. China Technol. Sci., vol. 64, no. 2, pp. 400–406, 2021, https://doi.org/10.1007/s11431-020-1617-x.Suche in Google Scholar

[10] İ. Özkul, et al.., “Experimental investigation of the effects of different quaternary elements (Ti, V, Nb, Ga, and Hf) on the thermal and magnetic properties of CuAlNi shape memory alloy,” J. Mater. Res., vol. 37, no. 14, pp. 2271–2281, 2022, https://doi.org/10.1557/s43578-022-00625-y.Suche in Google Scholar

[11] G. Başbağ, O. Karaduman, İ. Özkul, C. A. Canbay, and M. Boyrazlı, “Thermo-structural shape memory effect characterization of novel CuAlCoMg HTSMA with ternary Co and quaternary Mg addititions,” J. Mater. Electron. Devices, vol. 2, pp. 34–39, 2022, Accessed: Jun. 07, 2023. [Online].Suche in Google Scholar

[12] O. Karaduman, I. Özkul, S. Altın, E. Altın, Ö. Baǧlayan, and C. A. Canbay, “New Cu-Al based quaternary and quinary high temperature shape memory alloy composition systems,” in AIP Conference Proceedings, New York, American Institute of Physics Inc., 2018.10.1063/1.5078902Suche in Google Scholar

[13] C. AksuCanbay and Z. Karagoz, “The effect of quaternary element on the thermodynamic parameters and structure of CuAlMn shape memory alloys,” Appl. Phys. A: Mater. Sci. Process., vol. 113, no. 1, pp. 19–25, 2013, https://doi.org/10.1007/s00339-013-7880-3.Suche in Google Scholar

[14] E. Aldirmaz, M. Güler, and E. Güler, “Effect of quaternary element (Ni and Mn) additions on structural and magnetic properties of Cu-based alloys,” Braz. J. Phys., vol. 51, pp. 1224–1229, 2021, https://doi.org/10.1007/s13538-021-00926-3.Suche in Google Scholar

[15] S. Karthick, et al.., “Influence of quaternary alloying addition on transformation temperatures and shape memory properties of Cu–Al–Mn shape memory alloy coated optical fiber,” Measurement, vol. 153, p. 107379, 2020, https://doi.org/10.1016/j.measurement.2019.107379.Suche in Google Scholar

[16] C. A. Canbay, O. Karaduman, N. Ünlü, S. A. Baiz, and İ. Özkul, “Heat treatment and quenching media effects on the thermodynamical, thermoelastical and structural characteristics of a new Cu-based quaternary shape memory alloy,” Compos. B Eng., vol. 174, p. 106940, 2019, https://doi.org/10.1016/j.compositesb.2019.106940.Suche in Google Scholar

[17] R. O. Ferreira, L. S. Silva, and R. A. G. Silva, “Thermal behavior of as-annealed CuAlMnAgZr alloys,” J. Therm. Anal. Calorim., vol. 146, no. 2, pp. 595–600, 2021, https://doi.org/10.1007/s10973-020-10002-8.Suche in Google Scholar

[18] C. A. Canbay, A. Tataroglu, A. Dere, A. Al-Ghamdi, and F. Yakuphanoglu, “A new shape memory alloy film/p-Si solar light four quadrant detector for solar tracking applications,” J. Alloys Compd., vol. 688, pp. 762–768, 2016, https://doi.org/10.1016/J.JALLCOM.2016.07.087.Suche in Google Scholar

[19] C. A. Canbay, et al.., “Electrical, kinetic and photoelectrical properties of CuAlMnMg shape memory alloy/n-Si Schottky diode,” J. Alloys Compd., vol. 888, p. 161600, 2021, https://doi.org/10.1016/J.JALLCOM.2021.161600.Suche in Google Scholar

[20] R. Dasgupta, A. K. Jain, P. Kumar, S. Hussain, and A. Pandey, “Role of alloying additions on the properties of Cu–Al–Mn shape memory alloys,” J. Alloys Compd., vol. 620, pp. 60–66, 2015, https://doi.org/10.1016/j.jallcom.2014.09.047.Suche in Google Scholar

[21] J. F. Gómez-Cortés, et al.., “Superelastic damping at nanoscale in ternary and quaternary Cu-based shape memory alloys,” J. Alloys Compd., vol. 883, p. 160865, 2021, https://doi.org/10.1016/j.jallcom.2021.160865.Suche in Google Scholar

[22] J. Tian, et al.., “Process optimization, microstructures and mechanical properties of a Cu-based shape memory alloy fabricated by selective laser melting,” J. Alloys Compd., vol. 785, pp. 754–764, 2019, https://doi.org/10.1016/j.jallcom.2019.01.153.Suche in Google Scholar

[23] L. Gomidželović, E. Požega, A. Kostov, and N. Vuković, “Investigation of the structural, mechanical and electrical properties of Cu–Al–Zn shape memory alloys,” Mater. Test., vol. 56, no. 6, pp. 486–489, 2014, https://doi.org/10.3139/120.110591.Suche in Google Scholar

[24] O. Karaduman, et al., “Smart alloy metalized novel photonic NEMS photodiode with CuAlV/n-Si/Al junction structure,” Phys. Scr., vol. 99, no. 2, p. 025993, 2024.10.1088/1402-4896/ad2047Suche in Google Scholar

[25] E. Obradó, L. Mañosa, and A. Planes, “Influence of composition and thermal treatments on the martensitic transition of Cu–Al–Mn alloys,” J. Phys. IV : JP, vol. 7, no. C5, pp. 233–238, 1997. https://doi.org/10.1051/jp4:1997536.10.1051/jp4:1997536Suche in Google Scholar

[26] S. M. Chentouf, M. Bouabdallah, J.-C. Gachon, E. Patoor, and A. Sari, “Microstructural and thermodynamic study of hypoeutectoidal Cu–Al–Ni shape memory alloys,” J. Alloys Compd., vol. 470, nos. 1–2, 2009, https://doi.org/10.1016/j.jallcom.2008.03.009.Suche in Google Scholar

[27] C. A. Canbay, O. Karaduman, N. Ünlü, and İ. Özkul, “An exploratory research of calorimetric and structural shape memory effect characteristics of Cu–Al–Sn alloy,” Phys. B Condens. Matter, vol. 580, p. 411932, 2020, https://doi.org/10.1016/j.physb.2019.411932.Suche in Google Scholar

[28] C. A. Canbay, O. Karaduman, İ. Özkul, and N. Ünlü, “Modifying thermal and structural characteristics of CuAlFeMn shape memory alloy and a hypothetical analysis to optimize surface-diffusion annealing temperature,” J. Mater. Eng. Perform., vol. 29, no. 12, pp. 7993–8005, 2020, https://doi.org/10.1007/s11665-020-05241-7.Suche in Google Scholar

[29] K. Sugimoto, K. Kamei, H. Matsumoto, S. Komatsu, K. Akamatsu, and T. Sugimoto, “Grain-refinement and the related phenomena in quaternary Cu–Al–Ni–Ti shape memory alloys,” Le J. Phys. Colloq., vol. 43, no. C4, pp. C4-761–C4-766, 1982, https://doi.org/10.1051/jphyscol:19824124.10.1051/jphyscol:19824124Suche in Google Scholar

[30] U. Sari and I. Aksoy, “Electron microscopy study of 2H and 18R martensites in Cu–11.92 wt.% Al–3.78 wt.% Ni shape memory alloy,” J. Alloys Compd., vol. 417, nos. 1–2, pp. 138–142, 2006, https://doi.org/10.1016/j.jallcom.2005.09.049.Suche in Google Scholar

[31] M. J. Santofimia, J. G. Speer, A. J. Clarke, L. Zhao, and J. Sietsma, “Influence of interface mobility on the evolution of austenite–martensite grain assemblies during annealing,” Acta Mater., vol. 57, no. 15, pp. 4548–4557, 2009, https://doi.org/10.1016/j.actamat.2009.06.024.Suche in Google Scholar

[32] A. L. Roytburd, “Kurdjumov and his school in martensite of the 20th century,” Mater. Sci. Eng., vol. 273–275, pp. 1–10, 1999, https://doi.org/10.1016/S0921-5093(99)00285-3.Suche in Google Scholar

[33] J. Sun, “Examination of α′′, α′ and ω phases in a β-type titanium–niobium metal,” Mater. Test., vol. 64, no. 12, pp. 1720–1732, 2022, https://doi.org/10.1515/mt-2022-0099.Suche in Google Scholar

[34] X. Li, Y. Guo, Y. Xu, Y. Xu, S. Zhang, and Z. Yang, “Effect of vacancies on the damping attenuation of Mn–Cu–Al–0∼3Sn alloys at room temperature,” Mater. Test., vol. 65, no. 5, pp. 725–732, 2023, https://doi.org/10.1515/mt-2022-0419.Suche in Google Scholar

[35] S. N. Saud, E. Hamzah, T. Abubakar, H. R. Bakhsheshi-Rad, M. Zamri, and M. Tanemura, “Effects of Mn additions on the structure, mechanical properties, and corrosion behavior of Cu–Al–Ni shape memory alloys,” J. Mater. Eng. Perform., vol. 23, no. 10, pp. 3620–3629, 2014, https://doi.org/10.1007/s11665-014-1134-1.Suche in Google Scholar

[36] A. S. M. Najib, S. N. Saud, and E. Hamzah, “Corrosion behavior of Cu–Al–Ni–xCo shape memory alloys coupled with low-carbon steel for civil engineering applications,” J. Bio- Tribo-Corros., vol. 5, no. 2, pp. 1–9, 2019. https://doi.org/10.1007/s40735-019-0242-8.Suche in Google Scholar

[37] Z. G. Wei, H. Y. Peng, W. H. Zou, and D. Z. Yang, “Aging effects in a Cu–12Al–5Ni–2Mn–1Ti shape memory alloy,” Metall. Mater. Trans., vol. 28, pp. 955–967, 1997, https://doi.org/10.1007/s11661-997-0226-z.Suche in Google Scholar

[38] C. A. Canbay, O. Karaduman, N. Ünlü, İ. Özkul, and M. A. Çiçek, “Energetic behavior study in phase transformations of high temperature Cu–Al–X (X: Mn, Te, Sn, Hf) shape memory alloys,” Trans. Indian Inst. Met., vol. 74, pp. 2447–2458, 2021, https://doi.org/10.1007/s12666-021-02241-6.Suche in Google Scholar

[39] C. P. Wang, Y. Su, S. Y. Yang, Z. Shi, and X. J. Liu, “A new type of Cu–Al–Ta shape memory alloy with high martensitic transformation temperature,” Smart Mater. Struct., vol. 23, no. 2, Art. no. 025018, 2014, https://doi.org/10.1088/0964-1726/23/2/025018.Suche in Google Scholar

[40] S. Yang, et al., “Superelasticity and shape memory effect in Cu–Al–Mn–V shape memory alloys,” Mater. Des., vol. 115, pp. 17–25, 2017. https://doi.org/10.1016/j.matdes.2016.11.035.Suche in Google Scholar

[41] S. Yang, et al.., “Shape memory effect promoted through martensite stabilization induced by the precipitates in Cu–Al–Mn–Fe alloys,” Mater. Sci. Eng., A, vol. 739, pp. 455–462, 2019, https://doi.org/10.1016/j.msea.2018.10.012.Suche in Google Scholar

[42] O. Karaduman, C. A. Canbay, İ. Özkul, S. Aziz Baiz, and N. Ünlü, “Production and characterization of ternary heusler shape memory alloy with A new composition,” J. Mater. Electron. Devices, vol. 1, pp. 16–19, 2018, Accessed: Nov. 09, 2021. [Online].Suche in Google Scholar
Published Online: 2024-03-13
Published in Print: 2024-05-27

© 2024 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Frontmatter
  2. Design optimization of bellow joints used in liquid propellant rocket engines
  3. Microstructure and mechanical properties of a Ti6Al4V alloy recycled by waste chips vacuum arc melting
  4. High thermal stability effect of vanadium on the binary CuAl base alloy for a novel CuAlV high-temperature shape memory alloy
  5. Microstructure and properties of Co based laser cladded composite coatings
  6. Tribological and electrochemical corrosion behavior of binary Mg–3Zn novel hybrid composites for biodegradable implant applications
  7. Exfoliation behavior of EN AW 7020 with T6, step aging and ultrasonic impact peening processes
  8. Crash performance of a novel bio-inspired energy absorber produced by additive manufacturing using PLA and ABS materials
  9. Acoustic properties of ABS and PLA parts produced by additive manufacturing using different printing parameters
  10. A novel experimental method for measuring the direct tensile strength of concrete
  11. Usage of an improved YOLOv5 for steel surface defect detection
  12. Thermal analyses and weight gain modeling study on Ti–Al – based intermetallic coated Ti6Al4V alloy
  13. Effect of temperature on oxidation during boriding of Ni-Hard 4
  14. Wear behaviour of glass fiber reinforced polyester composites under dry friction and fluid film lubrication
  15. X-ray diffraction and photoelectron spectroscopy analyses of MXene electrode material used in energy storage applications – a review
https://doi.org/10.1515/mt-2023-0375
Schlagwörter für diesen Artikel
CuAl-based HTSMA; vanadium addition; shape memory effect; martensitic transformation; DSC; DTA

Artikel in diesem Heft

  1. Frontmatter
  2. Design optimization of bellow joints used in liquid propellant rocket engines
  3. Microstructure and mechanical properties of a Ti6Al4V alloy recycled by waste chips vacuum arc melting
  4. High thermal stability effect of vanadium on the binary CuAl base alloy for a novel CuAlV high-temperature shape memory alloy
  5. Microstructure and properties of Co based laser cladded composite coatings
  6. Tribological and electrochemical corrosion behavior of binary Mg–3Zn novel hybrid composites for biodegradable implant applications
  7. Exfoliation behavior of EN AW 7020 with T6, step aging and ultrasonic impact peening processes
  8. Crash performance of a novel bio-inspired energy absorber produced by additive manufacturing using PLA and ABS materials
  9. Acoustic properties of ABS and PLA parts produced by additive manufacturing using different printing parameters
  10. A novel experimental method for measuring the direct tensile strength of concrete
  11. Usage of an improved YOLOv5 for steel surface defect detection
  12. Thermal analyses and weight gain modeling study on Ti–Al – based intermetallic coated Ti6Al4V alloy
  13. Effect of temperature on oxidation during boriding of Ni-Hard 4
  14. Wear behaviour of glass fiber reinforced polyester composites under dry friction and fluid film lubrication
  15. X-ray diffraction and photoelectron spectroscopy analyses of MXene electrode material used in energy storage applications – a review
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 29.9.2025 von https://www.degruyterbrill.com/document/doi/10.1515/mt-2023-0375/html
Button zum nach oben scrollen