Artikel
Open Access
Effect of Deformation Temperatures on High Temperature Tensile Instability of Austenitic Stainless Steel
-
Hongxia Bian
,
Hui Zhou
Veröffentlicht/Copyright:
7. März 2014
Received: 2013-9-24
Accepted: 2013-11-27
Published Online: 2014-3-7
Published in Print: 2014-9-29
©2014 by Walter de Gruyter Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Morphology-controlled Synthesis of Hexagonal AlN Whiskers by Direct Nitridation of Aluminum and Alumina Mixture
- Surface Modification of the Ti6Al4V Alloy with Silicon Carbonitride Layer Deposited by PACVD Method
- Effect of Rare Earth Yttrium on the Hot Ductility of Eco-friendly Bi-S Based Free Cutting Steel
- High Temperature Oxidation of Nickel-based Cermet Coatings Composed of Al2O3 and TiO2 Nanosized Particles
- Effect of Liquid-phase Siliconizing Process on Silicon Diffusion Behavior in Mo Matrix
- Preparation of Eupatorium Adenophorum Based Porous Carbon with Microwave Heating using Response Surface Methodology
- Thermodynamic Analysis of the Corrosion of Fe-16Cr Alloy Interconnect of Solid Oxide Fuel Cell under Various Atmospheres
- Microstructure and Creep Property of Isothermal Forging GH4169G Superalloy
- Effect of Reheat Treatment on Microstructural Refurbishment and Hardness of the As-cast Inconel 738
- Effect of Deformation Temperatures on High Temperature Tensile Instability of Austenitic Stainless Steel
- Oxidation Mechanism of Copper Selenide
- Electromagnetic Levitation of Silicon and Silicon-Iron Alloy Droplets
- The Precipitation Behavior of Secondary γ′ Phase in Superalloy FGH96 During Aging Treatment
Schlagwörter für diesen Artikel
load instability;
geometrical instability;
work hardening exponent;
strain rate sensitivity coefficient
Creative Commons
BY-NC-ND 3.0
Artikel in diesem Heft
- Frontmatter
- Morphology-controlled Synthesis of Hexagonal AlN Whiskers by Direct Nitridation of Aluminum and Alumina Mixture
- Surface Modification of the Ti6Al4V Alloy with Silicon Carbonitride Layer Deposited by PACVD Method
- Effect of Rare Earth Yttrium on the Hot Ductility of Eco-friendly Bi-S Based Free Cutting Steel
- High Temperature Oxidation of Nickel-based Cermet Coatings Composed of Al2O3 and TiO2 Nanosized Particles
- Effect of Liquid-phase Siliconizing Process on Silicon Diffusion Behavior in Mo Matrix
- Preparation of Eupatorium Adenophorum Based Porous Carbon with Microwave Heating using Response Surface Methodology
- Thermodynamic Analysis of the Corrosion of Fe-16Cr Alloy Interconnect of Solid Oxide Fuel Cell under Various Atmospheres
- Microstructure and Creep Property of Isothermal Forging GH4169G Superalloy
- Effect of Reheat Treatment on Microstructural Refurbishment and Hardness of the As-cast Inconel 738
- Effect of Deformation Temperatures on High Temperature Tensile Instability of Austenitic Stainless Steel
- Oxidation Mechanism of Copper Selenide
- Electromagnetic Levitation of Silicon and Silicon-Iron Alloy Droplets
- The Precipitation Behavior of Secondary γ′ Phase in Superalloy FGH96 During Aging Treatment
