Startseite Synergistic improvement to dimensional stability of Populus cathay ana via hemicellulose removal/alkali lignin impregnation
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Synergistic improvement to dimensional stability of Populus cathay ana via hemicellulose removal/alkali lignin impregnation

  • Meng Yang , Runhua Zhang und Erni Ma EMAIL logo
Veröffentlicht/Copyright: 24. April 2023
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Holzforschung
Aus der Zeitschrift Holzforschung Band 77 Heft 6

Abstract

Poor dimensional stability restricts the commercial utilization of fast-growing wood. In this study, fast-growing poplar (Populus cathayana) was treated by removing hemicellulose with hydrothermal treatment and impregnating alkali lignin via full-cell process, synergistically, for enhanced dimensional stability. After modification, hydroxyl groups were reduced in hemicellulose removed wood (DHC), alkali lignin was observed to fill in the cell lumens of vessels and wood fibers in the impregnated wood (AL) and in the wood modified by hemicellulose removal with alkali lignin impregnation (DHCAL). Compared with untreated wood, the volumetric swelling ratio of DHC and AL decreased by 11 % and 21 % under relative humidity (RH) of 89 %, respectively. The volumetric swelling ratio of DHCAL decreased by over 50 %, indicating a positive synergistic effect. The combination of hemicellulose removal and alkali lignin impregnation treatment improved the dimensional stability of wood significantly by reconstructing wood chemical components with various levels of hygroscopicity. This work could meaningfully contribute to the efficient utilization of fast-growing wood and promote the added value of industrial alkali lignin.

Keywords: alkali lignin; dimensional stability; fast-growing poplar; hemicellulose removal; wood modification
Corresponding author: Erni Ma, Beijing Key Laboratory of Wood Science and Engineering, Beijing Forestry University, Haidian, 100083, Beijing, China, E-mail:

Funding source: National Natural Science Foundation of China

Award Identifier / Grant number: No. 31971583

  1. Author contributions: Meng Yang: conceptualization, investigation, methodology, formal analysis, validation, data curation, visualization, writing-original draft, writing-review & editing. Runhua Zhang: investigation, methodology, visualization, supervision, writing-review & editing. Erni Ma: funding acquisition, conceptualization, methodology, resources, project administration, supervision, writing-review & editing. All authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.

  2. Research funding: This research was funded by the National Natural Science Foundation of China, grant no. 31971583.

  3. Conflict of interest statement: The authors declare that they have no conflicts of interest regarding this article.

References

Altgen, M., Hofmann, T., and Militz, H. (2016). Wood moisture content during the thermal modification process affects the improvement in hygroscopicity of Scots pine sapwood. Wood Sci. Technol. 50: 1181–1195, https://doi.org/10.1007/s00226-016-0845-x.Suche in Google Scholar

Andersson, S., Serimaa, R., Väänänen, T., Paakkari, T., Jämsä, S., and Viitaniemi, P. (2005). X-ray scattering studies of thermally modified Scots pine (Pinus sylvestris L.). Holzforschung 59: 422–427, https://doi.org/10.1515/hf.2005.069.Suche in Google Scholar

Antczak, A., Szadkowski, J., Szadkowska, D., and Zawadzki, J. (2022). Assessment of the effectiveness of liquid hot water and steam explosion pretreatments of fast-growing poplar (Populus trichocarpa) wood. Wood Sci. Technol. 56: 87–109, https://doi.org/10.1007/s00226-021-01350-1.Suche in Google Scholar

Chen, P., Dai, K., Wang, Z., Zhuang, W., Yang, P., Ying, H., and Wu, J. (2021). Separation and recovery of alkali lignin and NaOH based on size exclusion methodology. Sep. Purif. Technol. 257: 117852, https://doi.org/10.1016/j.seppur.2020.117852.Suche in Google Scholar

Chien, Y., Yang, T., Hung, K., Li, C., Xu, J., and Wu, J. (2018). Effects of heat treatment on the chem-ical compositions and thermal decomposition kinetics of Japanese cedar and beech wood. Polym. Degrad. Stabil. 158: 220–227, https://doi.org/10.1016/j.polymdegradstab.2018.11.003.Suche in Google Scholar

Dong, Y., Yan, Y., Wang, K., Li, J., Zhang, S., Xia, C., Shi, S.Q., and Cai, L. (2016). Improvement of water resistance, dimensional stability, and mechanical properties of poplar wood by rosin impregnation. Eur. J. Wood Wood Prod. 74: 177–184, https://doi.org/10.1007/s00107-015-0998-6.Suche in Google Scholar

Gao, C., Zhang, Y., and Wang, C. (2015). Effect of high-temperature hydrothermal treatment on properties of particleboard. Packag. Eng. (Chinese) 36: 36–39. ISSN1001-3563.Suche in Google Scholar

García-Iruela, A., Esteban, L.G., García Fernández, F., de Palacios, P., Rodriguez-Navarro, A.B., Martín-Sampedro, R., and Eugenio, M.E. (2019). Effect of vacuum/pressure cycles on cell wall composition and structure of poplar wood. Cellulose 26: 8543–8556, https://doi.org/10.1007/s10570-019-02692-7.Suche in Google Scholar

Grönquist, P., Frey, M., Keplinger, T., and Burgert, I. (2019). Mesoporosity of delignified wood investigated by water vapor sorption. ACS Omega 4: 12425–12431, https://doi.org/10.1021/acsomega.9b00862.Suche in Google Scholar PubMed PubMed Central

Guo, X., Fu, Y., Zhang, F., Li, X., and Liu, N. (2021). Change of structural features and relocalization of chemical components in the autohydrolyzed poplar wood chips enhance the accessibility of remaining components. Ind. Crop. Prod. 167: 113508, https://doi.org/10.1016/j.indcrop.2021.113508.Suche in Google Scholar

He, M., Xu, D., Li, C., Ma, Y., Dai, X., Pan, X., Fan, J., He, Z., Gui, S., Dong, X., et al.. (2020). Cell wall bulking by maleic anhydride for wood durability improvement. Forests 11: 367, https://doi.org/10.3390/f11040367.Suche in Google Scholar

Hill, C.A.S., Altgen, M., and Rautkari, L. (2021). Thermal modification of wood—a review: chemical changes and hygroscopicity. J. Mater. Sci. 56: 6581–6614.10.1007/s10853-020-05722-zSuche in Google Scholar

Hosseinaei, O., Wang, S., Enayati, A.A., and Rials, T.G. (2012). Effects of hemicellulose extraction on properties of wood flour and wood-plastic composites. Compos. Part A-Appl. S. 43: 686–694, https://doi.org/10.1016/j.compositesa.2012.01.007.Suche in Google Scholar

Hou, S., Wang, J., Yin, F., Qi, C., and Mu, J. (2022). Moisture sorption isotherms and hysteresis of cellulose, hemicelluloses and lignin isolated from birch wood and their effects on wood hygroscopicity. Wood Sci. Technol. 56: 1087–1102.10.1007/s00226-022-01393-ySuche in Google Scholar

Huang, Y., Ma, E., and Zhao, G. (2015). Thermal and structure analysis on reaction mechanisms during the preparation of activated carbon fibers by KOH activation from liquefied wood-based fibers. Ind. Crop. Prod. 69: 447–455, https://doi.org/10.1016/j.indcrop.2015.03.002.Suche in Google Scholar

Inalbon, M.C., Solier, Y.N., and Zanuttini, M.Á. (2017). Hydrothermal treatment of Eucalyptus wood: effects on Ion permeability and material removing. Ind. Crop. Prod. 104: 195–200, https://doi.org/10.1016/j.indcrop.2017.04.042.Suche in Google Scholar

Jiang, X., Hou, Q., Liu, W., Zhang, H., and Qin, Q. (2016). Hemicelluloses removal in autohydrolysis pretreatment enhances the subsequent alkali impregnation effectiveness of poplar sapwood. Bioresour. Technol. 222: 361–366, https://doi.org/10.1016/j.biortech.2016.10.017.Suche in Google Scholar PubMed

Kulasinski, K., Salmén, L., Derome, D., and Carmeliet, J. (2016). Moisture adsorption of glucomannan and xylan hemicelluloses. Cellulose 23: 1629–1637, https://doi.org/10.1007/s10570-016-0944-8.Suche in Google Scholar

Kymäläinen, M., Ben Mlouka, S., Belt, T., Merk, V., Liljeström, V., Hänninen, T., Uimonen, T., Kostiainen, M., and Rautkari, L. (2018). Chemical, water vapour sorption and ultrastructural analysis of Scots pine wood thermally modified in high-pressure reactor under saturated steam. J. Mater. Sci. 53: 3027–3037, https://doi.org/10.1007/s10853-017-1714-1.Suche in Google Scholar

Kyyrö, S., Altgen, M., Seppäläinen, H., Belt, T., and Rautkari, L. (2021). Effect of drying on the hydroxyl accessibility and sorption properties of pressurized hot water extracted wood. Wood Sci. Technol. 55: 1203–1220, https://doi.org/10.1007/s00226-021-01307-4.Suche in Google Scholar

Kyyrö, S., Altgen, M., Belt, T., Seppäläinen, H., Brischke, C., Heinze, P., Militz, H., and Rautkari, L. (2022). Effect of pressurized hot water extraction and esterification on the moisture properties and decay resistance of Scots pine (Pinus sylvestris L.) sapwood. Holzforschung 76: 916–928, https://doi.org/10.1515/hf-2022-0100.Suche in Google Scholar

Labbe, N., Rials, T.G., Kelley, S.S., Cheng, Z., Kim, J.Y., and Li, Y. (2005). FT-IR imaging and pyrolysis-molecular beam mass spectrometry: new tools to investigate wood tissues. Wood Sci. Technol. 39: 61–76, https://doi.org/10.1007/s00226-004-0274-0.Suche in Google Scholar

Li, M., Chen, C., and Sun, R. (2014). Effect of pretreatment severity on the enzymatic hydrolysis of bamboo in hydrothermal deconstruction. Cellulose 21: 4105–4117, https://doi.org/10.1007/s10570-014-0451-8.Suche in Google Scholar

Lindh, E.L., Bergenstråhle-Wohlert, M., Terenzi, C., Salmén, L., and Furó, I. (2016). Non-exchanging hydroxyl groups on the surface of cellulose fibrils: the role of interaction with water. Carbohydr. Res. 434: 136–142, https://doi.org/10.1016/j.carres.2016.09.006.Suche in Google Scholar PubMed

Ling, Z., Ji, Z., Ding, D., Cao, J., and Xu, F. (2016). Microstructural and topochemical characterization of thermally modified poplar (Populus cathayaha) cell wall. Bioresources 11: 786–799, https://doi.org/10.15376/biores.11.1.786-799.Suche in Google Scholar

Liu, M., Yi, Q., Li, J., Ma, E., and Liu, R. (2019). Synergistic effect of montmorillonite/lignin on improvement of water resistance and dimensional stability of Populus cathayana. Ind. Crop. Prod. 141: 111747, https://doi.org/10.1016/j.indcrop.2019.111747.Suche in Google Scholar

Ma, J., Ji, Z., Chen, J., Zhou, X., Kim, Y.S., and Xu, F. (2015). The mechanism of xylans removal during hydrothermal pretreatment of poplar fibers investigated by immunogold labeling. Planta 242: 327–337, https://doi.org/10.1007/s00425-015-2313-5.Suche in Google Scholar PubMed

Ma, X., Zheng, X., Yang, H., Wu, H., Cao, S., Chen, L., and Huang, L. (2016). A perspective on lignin effects on hemicelluloses dissolution for bamboo pretreatment. Ind. Crop. Prod. 94: 117–121, https://doi.org/10.1016/j.indcrop.2016.08.025.Suche in Google Scholar

Metsä-Kortelainen, S., Antikainen, T., and Viitaniemi, P. (2006). The water absorption of sapwood and heartwood of Scots pine and Norway spruce heat-treated at 170°C, 190°C, 210°Cand 230°C. Holz. Roh. Werkst. 64: 192–197, https://doi.org/10.1007/s00107-005-0063-y.Suche in Google Scholar

Ou, R., Xie, Y., Wolcott, M.P., Sui, S., and Wang, Q. (2014). Morphology, mechanical properties, and dimensional stability of wood particle/high density polyethylene composites: effect of removal of wood cell wall composition. Mater. Des. 58: 339–345, https://doi.org/10.1016/j.matdes.2014.02.018.Suche in Google Scholar

Priadi, T., Suharjo, A.A.C., and Karlinasari, L. (2019). Dimensional stability and colour change of heat-treated young teak wood. Int. Wood Prod. J. 10: 119–125, https://doi.org/10.1080/20426445.2019.1679430.Suche in Google Scholar

Rautkari, L., Hill, C.A.S., Curling, S., Jalaludin, Z., and Ormondroyd, G. (2013). What is the role of the accessibility of wood hydroxyl groups in controlling moisture content? J. Mater. Sci. 48: 6352–6356, https://doi.org/10.1007/s10853-013-7434-2.Suche in Google Scholar

Srinivas, K. and Pandey, K.K. (2012). Effect of heat treatment on color changes, dimensional stability, and mechanical properties of wood. J. Wood Chem. Technol. 32: 304–316, https://doi.org/10.1080/02773813.2012.674170.Suche in Google Scholar

Standard China (1934). Method for determination the water absorption of wood (GB/T 1934.1-2009). Standards Press of China, Beijing.Suche in Google Scholar

Stokke, D.D., Wu, Q., and Han, G. (2013). Introduction to wood and natural fiber composites. John Wiley & Sons, Inc, UK.10.1002/9780470711804Suche in Google Scholar

Thybring, E.E., Piqueras, S., Tarmian, A., and Burgert, I. (2020). Water accessibility to hydroxyls confined in solid wood cell walls. Cellulose 27: 5617–5627.10.1007/s10570-020-03182-xSuche in Google Scholar

Wang, X., Zhang, Y., Yu, Z., and Qi, C. (2017). Properties of fast-growing poplar wood simultaneously treated with dye and flame retardant. Eur. J. Wood Wood Prod. 75: 325–333.10.1007/s00107-016-1142-ySuche in Google Scholar

Wang, Y., Zhang, R., Yang, M., Peng, Y., and Cao, J. (2022). Improvement on dimensional stability and mold resistance of wood modified by tannin acid and tung oil. Holzforschung 76: 929–940, https://doi.org/10.1515/hf-2022-0062.Suche in Google Scholar

Xu, F., Xu, L., Zheng, C., Wang, Y., and Zhang, H. (2022). Effect of lignin removal on the hygroscopicity of PMMA/Wood composites. Polymers 14: 3356, https://doi.org/10.3390/polym14163356.Suche in Google Scholar PubMed PubMed Central

Xu, J., Zhang, Y., Shen, Y., Li, C., Wang, Y., Ma, Z., and Sun, W. (2019). New perspective on wood thermal modification: Relevance between the evolution of chemical structure and physical-mechanical properties, and online analysis of release of VOCs. Polymers 11: 1145–1163, https://doi.org/10.3390/polym11071145.Suche in Google Scholar PubMed PubMed Central

Yang, L. and Liu, H. (2020). Effect of a combination of moderate-temperature heat treatment and subsequent wax impregnation on wood hygroscopicity, dimensional stability, and mechanical properties. Forests 11: 920–928, https://doi.org/10.3390/f11090920.Suche in Google Scholar

Yang, T. (2020). Moisture sorption and deformation response mechanisms of furfurylated poplar wood to cyclically changing relative humidity. Ph.D. thesis. Beijing, Beijing Forestry University.Suche in Google Scholar

Yang, T., Ma, E., and Cao, J. (2018a). Effects of lignin in wood on moisture sorption and hygroexpansion tested under dynamic condition. Holzforschung 72: 943–950, https://doi.org/10.1515/hf-2017-0198.Suche in Google Scholar

Yang, T., Zhou, H., Ma, E., and Wang, J. (2018b). Effects of removal of different chemical components on moisture sorption property of Populus euramericana Cv. under dynamic hygrothermal conditions. Results Phys. 10: 61–68, https://doi.org/10.1016/j.rinp.2018.05.024.Suche in Google Scholar

Yang, T., Ma, E., and Cao, J. (2019). Synergistic effects of partial hemicellulose removal and furfurylation on improving the dimensional stability of poplar wood tested under dynamic condition. Ind. Crop. Prod. 139: 111550, https://doi.org/10.1016/j.indcrop.2019.111550.Suche in Google Scholar

Yang, T., Ma, E., and Cao, J. (2020). Dynamic moisture sorption and dimensional stability of furfurylated wood with low lignin content. Holzforschung 74: 68–76, https://doi.org/10.1515/hf-2019-0033.Suche in Google Scholar

Yuan, J., Chen, Q., Fang, C., Zhang, S., Liu, X., and Fei, B. (2021). Effect of chemical composition of bamboo fibers on water sorption. Cellulose 28: 7273–7282, https://doi.org/10.1007/s10570-021-03988-3.Suche in Google Scholar

Zhou, H. (2018). Study on multi-scale improvement of dimensional stability of fast-growing poplar wood by alkali lignin. Master’s thesis. Beijing, Beijing Forestry University.Suche in Google Scholar

Zhou, H., Xu, R., and Ma, E. (2016). Effects of removal of chemical components on moisture adsorption by wood. Bioresources 11: 3110–3122, https://doi.org/10.15376/biores.11.2.3110-3122.Suche in Google Scholar

Zhou, H., Li, J., and Ma, E. (2018). Multiscale modification of Populus cathayana by alkali lignin combined with heat treatment. Polymers 10: 1240, https://doi.org/10.3390/polym10111240.Suche in Google Scholar PubMed PubMed Central

Supplementary Material

This article contains supplementary material (https://doi.org/10.1515/hf-2022-0147).

Received: 2022-09-17
Accepted: 2023-03-22
Published Online: 2023-04-24
Published in Print: 2023-06-27

© 2023 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Frontmatter
  2. Wood Physics/Mechanical Properties
  3. Effects of seismic strain rates on the perpendicular-to-grain compression behaviour of Dahurian larch, Mongolian pine and Chinese poplar: tests and stress-strain model
  4. The effect of the growth ring orientation on spring-back and set-recovery in surface-densified wood
  5. Synergistic improvement to dimensional stability of Populus cathay ana via hemicellulose removal/alkali lignin impregnation
  6. Adding gaseous ammonia with heat treatment to improve the mechanical properties of spruce wood
  7. Wood as a hydrothermally stimulated shape-memory material: mechanisms of shape-memory effect and molecular assembly structure networks
  8. Wood Chemistry
  9. Structural comparison of different isolated eucalyptus lignins and analysis of their interaction mechanism with bovine serum albumin solution under QCM-D
  10. Role of α-Fe2O3 nano-particles in protecting wood from ultraviolet light degradation
  11. Wood Science – Non-Tree Plants
  12. Radial distribution of vascular bundle morphology in Chinese bamboos: machine learning methodology for rapid sampling and classification
https://doi.org/10.1515/hf-2022-0147
Schlagwörter für diesen Artikel
alkali lignin; dimensional stability; fast-growing poplar; hemicellulose removal; wood modification

Artikel in diesem Heft

  1. Frontmatter
  2. Wood Physics/Mechanical Properties
  3. Effects of seismic strain rates on the perpendicular-to-grain compression behaviour of Dahurian larch, Mongolian pine and Chinese poplar: tests and stress-strain model
  4. The effect of the growth ring orientation on spring-back and set-recovery in surface-densified wood
  5. Synergistic improvement to dimensional stability of Populus cathay ana via hemicellulose removal/alkali lignin impregnation
  6. Adding gaseous ammonia with heat treatment to improve the mechanical properties of spruce wood
  7. Wood as a hydrothermally stimulated shape-memory material: mechanisms of shape-memory effect and molecular assembly structure networks
  8. Wood Chemistry
  9. Structural comparison of different isolated eucalyptus lignins and analysis of their interaction mechanism with bovine serum albumin solution under QCM-D
  10. Role of α-Fe2O3 nano-particles in protecting wood from ultraviolet light degradation
  11. Wood Science – Non-Tree Plants
  12. Radial distribution of vascular bundle morphology in Chinese bamboos: machine learning methodology for rapid sampling and classification
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 23.9.2025 von https://www.degruyterbrill.com/document/doi/10.1515/hf-2022-0147/html
Button zum nach oben scrollen