Artikel
Open Access
Method for Introducing Zeolites and MCM-41 into Polypropylene Melt-Blown Nonwovens
-
Agnieszka Brochocka
,
Aleksandra Zagawa
Veröffentlicht/Copyright:
4. Dezember 2019
Published Online: 2019-12-04
Published in Print: 2019-12-01
© 2019 Agnieszka Brochocka et al., published by Sciendo
Artikel in diesem Heft
- The Use of New Technologies for the Development of Protective Clothing: Comparative Analysis of Body Dimensions of Static and Dynamic Postures and its Application
- Method for Introducing Zeolites and MCM-41 into Polypropylene Melt-Blown Nonwovens
- Investigation of the Effects of Different Bias Angles of Stitching on Seam Performance of Wool Suits
- Workplace Survey of Cold Protective Glove Aging
- Sewability (Based on Needle Penetration Force) of 1 × 1 Rib Knitted Fabrics Produced with Separate Ends of Yarns
- Technological Development of a Yarn Grip System for High-Speed Tensile Testing of High-Performance Fibers
- Sustainable Improvements for Customized Platform Effectiveness in Garment Production
- A Public Fabric Database for Defect Detection Methods and Results
- Changes in the Characteristic Impedance of Textile Signal Lines While Mechanically Loaded
- Three-Dimensional Deformation of Warp-Knitted Spacer Fabrics Under Tensile Loading
- Interrelation Between Tensile Properties of Yarns and Woven Fabrics with These Yarns
- Attitudes of Young European Consumers Toward Recycling Campaigns of Textile Companies
Schlagwörter für diesen Artikel
melt-blown process;
zeolites;
polypropylene nonwoven;
mesoporous silica;
sorption capacity of organic vapors
Creative Commons
BY-NC-ND 4.0
Artikel in diesem Heft
- The Use of New Technologies for the Development of Protective Clothing: Comparative Analysis of Body Dimensions of Static and Dynamic Postures and its Application
- Method for Introducing Zeolites and MCM-41 into Polypropylene Melt-Blown Nonwovens
- Investigation of the Effects of Different Bias Angles of Stitching on Seam Performance of Wool Suits
- Workplace Survey of Cold Protective Glove Aging
- Sewability (Based on Needle Penetration Force) of 1 × 1 Rib Knitted Fabrics Produced with Separate Ends of Yarns
- Technological Development of a Yarn Grip System for High-Speed Tensile Testing of High-Performance Fibers
- Sustainable Improvements for Customized Platform Effectiveness in Garment Production
- A Public Fabric Database for Defect Detection Methods and Results
- Changes in the Characteristic Impedance of Textile Signal Lines While Mechanically Loaded
- Three-Dimensional Deformation of Warp-Knitted Spacer Fabrics Under Tensile Loading
- Interrelation Between Tensile Properties of Yarns and Woven Fabrics with These Yarns
- Attitudes of Young European Consumers Toward Recycling Campaigns of Textile Companies
