The Use of New Technologies for the Development of Protective Clothing: Comparative Analysis of Body Dimensions of Static and Dynamic Postures and its Application

Articles in the same Issue

1. The Use of New Technologies for the Development of Protective Clothing: Comparative Analysis of Body Dimensions of Static and Dynamic Postures and its Application
2. Method for Introducing Zeolites and MCM-41 into Polypropylene Melt-Blown Nonwovens
3. Investigation of the Effects of Different Bias Angles of Stitching on Seam Performance of Wool Suits
4. Workplace Survey of Cold Protective Glove Aging
5. Sewability (Based on Needle Penetration Force) of 1 × 1 Rib Knitted Fabrics Produced with Separate Ends of Yarns
6. Technological Development of a Yarn Grip System for High-Speed Tensile Testing of High-Performance Fibers
7. Sustainable Improvements for Customized Platform Effectiveness in Garment Production
8. A Public Fabric Database for Defect Detection Methods and Results
9. Changes in the Characteristic Impedance of Textile Signal Lines While Mechanically Loaded
10. Three-Dimensional Deformation of Warp-Knitted Spacer Fabrics Under Tensile Loading
11. Interrelation Between Tensile Properties of Yarns and Woven Fabrics with These Yarns
12. Attitudes of Young European Consumers Toward Recycling Campaigns of Textile Companies