Volume 45, Issue 1

In traditional Chinese conservation of historic books and mounted scrolls, the preparation and use of paste is an important process step. The viscosity of the paste is a key factor to consider, taking into account various parameters such as conservation technique, paper condition, or paper thickness. This study aims to determine the viscosity variation of diluted and thick pastes used in traditional Chinese conservation techniques with a rotary viscometer. During conservation treatment, as the number of restored leaves increases, the viscosity of diluted paste tends to increase significantly. The study highlights the different requirements for viscosity depending on its use either in Chinese books or Chinese hanging scrolls and emphasizes the importance of monitoring and adjusting paste viscosity during the conservation process. The use of a rotary viscometer, along with the traditional finger test method, is a significant step forward in improving the accuracy and efficiency of determining paste viscosity.

In this study, Kozo fibres were fibrillated using the stone wet milling method and the wet atomisation method both deriving from nanocellulose production processes. Kozo fibres with a high degree of external fibrillation were obtained by using the stone mill wet grinding method. Although fibres exhibited the same structure as untreated Kozo fibres, their bonding properties improved. Applying the wet atomisation method, fibrillated Kozo fibres with different degrees of fibrillation were obtained depending on the number of treatments. Fibrillated Kozo fibres can be used in conservation as an adhesive for lining and other stabilisation treatments and may in certain cases replace starch paste, which is susceptible to microbiological damage. Only Kozo fibres and water were used in both mechanical fibrillation methods; therefore, the resulting material can be considered a safe alternative to more traditional adhesives.

The study investigates dust management at the Albert Ilemobade library, The Federal University of Technology Akure. Dust deposition and accumulation poses a major challenge for the university library as all the units, sections, and divisions are affected. Dust not only adversely affects all materials, equipment, and facilities including books, audiovisual collections, and computers, but also constitutes a health hazard to library personnel and users. Major sources of dust include visitor activities and infiltration through openings like windows and doors. Dust mats, special computer enclosures, dusters, dust blowers, and respiratory masks were made available for dust protection and management in the library. The library lacked equipment like High Efficiency Particulate Arresting (HEPA) filters and dust collection, and suppressions systems. Lack of awareness and training, inadequate funding, and lack of equipment were identified as the challenges to dust management in the library.

This research explores the practical advantages and potential applications of spray adhesives, focusing on testing their suitability for artwork mounting uses. Their solubility in common low-toxicity solvents (ethanol and acetone) was evaluated. Seven commercial spray adhesives from different commercial brands and compositions were applied on paper samples and subjected to different ageing conditions. The samples were then immersed in the solvent, and the degree of adhesive removal was measured. One of the most relevant conclusions is that commercial neoprene-based spray adhesives become brittle and fragile in a few weeks, which makes them unsuitable for both long-term and temporary applications in the heritage field. On the other hand, the solubility was high or very high in some cases: up to 98 % of adhesive removal was achieved in acetone wash. These tests and the convenience, cost and availability of spray adhesives suggest that some of them may be safely used in some scenarios such as temporary mountings or transport.