Band 17, Heft 4

Currently, in Poland, the State Spatial Reference System (SSRS) includes two height reference frames: PL-KRON86-NH and PL-EVRF2007-NH as the Polish implementation of the European Vertical Reference System (EVRF). The deadline for EVRF2007 implementation in Poland, as the only legally permitted height frame, is set at the end of 2023. Because of the administrative division, the implementation was planned in two stages: at the state level (government) and the local level (districts). In the article, the local ones are reviewed, especially regarding the aim of height conversion methods, costs and their progress. As a background, a historical perspective of height systems and frames used in Poland since the beginning of the 20th century is provided. The source of data was the Head Office of Geodesy and Cartography (HOGC), as well as the district surveying departments’ official answers; open documents posted on the Internet, e.g. tender documentation and their results were also analysed.

Positioning performance validates a smartphone’s antenna and chipset performance. This paper attempts to characterize the positioning performance of smartphones with dual-frequency GNSS chipsets compared to their counterparts using single-frequency chipsets. Furthermore, investigate the positioning performance of dual-frequency measurements using the NavIC L5 signal. A comparison of satellite geometry and position solution accuracy in relation to a known reference station is performed. The single-frequency positioning accuracy with 2DRMS (horizontal root mean square error) is about 5.11 m. Although, 2DRMS with dual-frequency measurements is 2.0 m. However, with the integration of NavIC with dual frequency measurements, the best position accuracy with 2DRMS is about 1.93 m over the observed location. It has been observed that single-frequency measurements can offer a MRSE (mean radial spherical error) precision of 2.75 m, whereas their dual-frequency counterparts can yield a precision of about 1.11 m, and with NavIC integration, it is around 1.05 m. During the observations, it should be noted that the NavIC L5 signals have modestly enhanced the positioning precision of smartphones. This analysis could be useful for fundamental Android GNSS research, smartphone positioning service and training communities.

This work addresses the topic of a quality modelling of terrestrial laser scans, including different quality measures such as precision, systematic deviations in distance measurement and completeness. For this purpose, the term “quality” is first defined in more detail in the field of TLS. A distinction is made between a total of seven categories that affect the quality of the TLS point cloud. The focus in this work lies on the uncertainty modeling of the TLS point clouds especially the distance measurement. It is demonstrated that influences such as the intensity and the incidence angle can lead to systematic deviations in the distance measurement of more than 1 mm. Based on these findings, it is presented that systematic deviations in distance measurement can be divided into four classes using machine learning classification approaches. The predicted classes can be useful for deformation analysis or for processing steps like registration. At the end of this work the entire quality assessment process is demonstrated using a real TLS point cloud (40 million points).

An essential ionosphere parameter that can be applied for ionosphere corrections in radio systems is the ionosphere’s total electron content (TEC). TEC is a crucial parameter for ionospheric correction in the Global Navigation Satellite Systems (GNSS) of positioning, navigation, and radio science. This study uses the artificial neural network (ANN) application to improve the International Reference Ionospheric Model (IRI-2016) TEC maps across Egypt. The study period is based on the data that were accessible between 2013 and 2020. The ANN model input parameters are (year, day, hour, latitude, and longitude). The ANN1 and ANN2 estimate TEC values of the enhanced IRI-2020 and IRI-2016 according to the Center for Orbit Determination in Europe (CODE), respectively. ANN3 and ANN4 estimate TEC values of the enhanced IRI-2020 and IRI-2016 regarding IGS stations data analyzed by GNSS Analysis software for the multi-constellation and multi-frequency Precise Positioning (GAMP) model, respectively. The ANN model’s validations were based on the root mean square error (RMSE), correlation coefficient (CC), and T -test. According to the results, the suggested ANN can accurately predict the TEC over Egypt. In comparison to the IRI model, the TEC maps that the ANN models produced are significantly more in accordance with the related CODE and GAMP TEC maps. These results demonstrate that the developed approach can enhance IRI 2016 and IRI-2020s ability to estimate global TEC maps. For the ANN1 model, the mean CC and RMSE are 0.92, and 5.15 TECU for all the global data sets compared by CODE. On the other hand, the CC and RMSE between IRI-2020 and CODE are 0.847 and 7.67 TECU. For the ANN2, the mean CC and RMSE are 0.87, 5.59 TECU compared by CODE, respectively. Although the CC and RMSE between IRI-2016 and CODE are 0.820 and 9.052 TECU respectively. For the ANN3, the CC and RMSE are 0.830 and 4.87 TECU compared with GAMP for all global data, respectively. On the other hand, the CC and RMSE between IRI-2020 and GAMP are 0.644 and 10.41, respectively. For the ANN4 the CC and RMSE are 0.82, and 5.95 TECU compared with GAMP, respectively. Although the CC and RMSE between IRI-2016 and GAMP are 0.665 and 12.347 TECU respectively.

One of the primary geodetic mapping tasks in the post-processing of GNSS data is precise point positioning (PPP). Research institutions and universities have established software packages and online PPP services in prior years. Still, it is problematic to satisfy the high-rate update criterion of PPP due to the quick growth of GNSS constellations. In PPP GNSS data processing, Square Root Information Filter SRIF is not frequently handled. In this research, we used the MANS-PPP software package to execute the processing method and generate the PPP GNSS solution. The new program has been demonstrated how can effectively enhance initial time and positioning error for multi-GNSS satellites. Processing observation data with the Kalman filter and SRIF was performed using PPP in static mode for the 16 stations, and the influence of errors has been analyzed from the filtering method. The Kalman filter was unable to maintain a stable convergence curve during the PPP filtering procedure, but SRIF was successful in doing so. Based on these findings, SRIF had better numerical stability and was well-suited for settings with PPP demanding precision computing environments.

This paper deals with applications of digital imaging total stations in a geodetic context using artificial intelligence (AI). We present two different use cases. The first is to minimise manual intervention by the operator by classifying images with different backgrounds. We use a developed software to control a total station extended by an industrial camera, which is used for the in-situ calibration of the camera. We show that the AI successfully tests the captured image for its suitability for further use and under which circumstances the AI fails. The second case is the detection of different geodetic targets (reflective and non-reflective). Captured images of an imaging total station are automatically checked to see whether a supposed target is shown in the image, identify it and localise it in the image. Already implemented applications for target identification are to be supported in this way and extended by further information.

With the advent of the Global Navigation Satellite System (GNSS), the need for precise and highly accurate orbit and clock products becomes crucial in processing GNSS data. Clocks in GNSS observations form the basis of positioning. Their high quality and stability enable high accuracy and the reliability of the obtained results. The clock modelling algorithms are continuously improved; thus, the accuracy of the clock products is evolving. At present, 8 Analysis Centers (ACs) contribute to the International GNSS Service final clock products. These products are based on GNSS observations on a network of reference stations, where for a given day one of the reference station clocks is the reference clock. In this paper, the authors determined the impact of the reference clock on the quality of clock product, especially outliers, for the first time. For this purpose, the multi-GNSS final clock products provided by the Center for Orbit Determination in Europe (CODE) for the period 2014–2021 (1773–2190 GPS week, 2921 days) were analysed. Analysis shows that by applying the Median Absolute Deviation (MAD) algorithm for outlier detection, the Passive Hydrogen Maser (PHM) clock installed on board the GALILEO satellites have the lowest level of noise, whereas the Block IIR GPS satellite launched in 1999 appears to have the highest levels of noise. Furthermore, the GNSS station OHIE3, when used as a reference clock, generates an increase in the level of noise, especially noticeable on the G09 and E03 satellites.

Time is the basis of satellite navigation systems. In precision studies, it is additionally important to ensure accuracy at the highest possible level, up to sub-millimetres. For this purpose, corrections of the clocks of satellites and GNSS reference stations are made available. This type of data is made available in real time in a navigation dispatch with an interval of 10 min–2 h depending on the GNSS system, or in a precision orbit file (interval of 15 min) or in the form of clock correction files (30 s or 300 s). This paper analyses the long-term stability of the clocks of satellites of four GNSS systems. For this purpose, IGS reprocessing data from 1994 to 2020 were used and ADEV (Allan deviation) and three related variances were adopted. The study showed the different nature of the satellite correction for each GNSS system and the increase of the stability over time.

The enhancement of positional accuracy of single frequency ionospheric correction models is an urgent need for low-cost and smartphone GNSS users. The available single frequency ionospheric correction models such as Klobuchar, NeQuick-G, NTCM, and Klob-BDS are providing ionospheric corrections for multi GNSS systems such as GPS, Galileo, BDS, and NAVIC systems. Otherwise, Global Ionospheric Map (GIM) Total Electron Content (TEC) corrections are also available to the GNSS users. In this letter, an improved Klobuchar ionospheric model is implemented. The slant TEC of dual Frequency GPS TEC observations is considered a reference. The Klobuchar model slant TEC observations are improved by taking the grid-based residual TEC corrections with the Adjusted Spherical Harmonic Function model. The Single frequency users can improve the ionospheric delay estimation using Klobuchar model and grid-based TEC residual corrections. The improved ionospheric correction model is tested under the biggest geomagnetic storm conditions during 24th Solar cycle that occurred in March 2015 over India. The proposed hybrid slant ionospheric TEC algorithms are evaluated with individual single frequency ionospheric models (Klobuchar, and GPS TEC) under adverse space weather conditions.

Indian Regional Navigation Satellite System (IRNSS) or Navigation with Indian Constellation (NavIC) provides positioning, navigation and timing information services to various users in Indian region. Standalone NavIC may not meet the position accuracies for certain application such as civil aviation. Differential NavIC is used for improving the position accuracy of rover receiver, which make use of differential corrections (transmitted from reference station). However, if the satellite signals are temporarily lost due to abruptly changing atmosphere, satellite health issues or if the satellite signals are attenuated due to city infrastructures in urban areas, tree canopies, the accuracy of NavIC will be degraded. This article compares regression tree and bagging tree based differential corrections prediction algorithm with the actual differential corrections, by considering the NavIC satellite signal strength ( C/No ) and elevation angle ( El ), to improve the NavIC positioning accuracy. The improvement in the position accuracy is obtained by utilizing predicted differential corrections. The position accuracy of rover using actual differential corrections (2DRMS – 3.09 m), regression tree predicted differential corrections (2DRMS – 5.96 m) and bagged tree predicted differential corrections (2DRMS – 3.06 m) are compared. Here, the rover accuracy using actual differential corrections and bagged tree predicted differential corrections are approximately equal. So, the position accuracy using bagged tree predicted differential corrections are accurate when compared to regression tree predicted differential corrections.

This document introduces Version 0.4 of the TRANS4D software, where TRANS4D is short for Transformations in Four Dimensions . TRANS4D enables geospatial professionals and others to transform three-dimensional positional coordinates across time and among several popular terrestrial reference frames. Version 0.4 introduces new crustal velocity models for the vicinities of Alaska and the Bering Sea, including parts of northwestern Canada and eastern Russia. These new models supplement existing velocity models for the continental United States as well as for most of Canada and for a neighborhood of the Caribbean plate. This document also provides evidence for the existence of a Bering tectonic plate, and it presents estimates for the Euler-pole parameters of this hypothesized plate. Moreover, estimated horizontal velocities computed at several geodetic stations located in Alaska provide evidence for the existence of part of the plate boundary separating the North American plate and the hypothesized Bering plate.