Band 12, Heft 5

A review of reactions of organolithium compounds (RLi) with alkali metal alkoxides is presented. On the one hand, simple lithium alkoxides form adducts with RLi the reactivity of which differs only slightly from that of RLi. On the other hand, after mixing heavier alkali metal alkoxides (R’OM, M = Na, K, Rb, Cs) with RLi, a new system is formed, which has reactivity that dramatically exceeds that of the parent RLi. A metal interchange, according to the equation RLi + R’OM = RM + R’OLi, occurs in this system, giving rise to a superbase. This reaction is frequently used for the preparation of heavier alkali metal organometallic compounds. Similar metal interchange takes place between R’OM and compounds such as lithium amides and lithium enolates of ketones or esters, thus demonstrating the general nature of this procedure. Superbases react easily with many types of organic compounds (substrates), resulting in the formation of a heavier alkali metal derivative of the substrate (metalation). The metalated substrate can react in situ with an electrophile to yield the substituted substrate, a procedure that is frequently used in synthetic and polymer chemistry. An improved mechanism of metal interchange and reaction of superbases with substrates is proposed.

The polymorphs of nimodipine, Modification I (Mod I), the metastable racemate, and Modification II (Mod II), the stable conglomerate, were evaluated by means of the intrinsic dissolution procedure. For this purpose, a hydro alcoholic solution (ethanol:water, 50:50, v/v) was selected as the dissolution medium, maintained at 37±0.5°C. Different rotation speeds were tested (50, 75 and 100 rpm) and the lower one was chosen for the test validation. Although the sample initially characterized as polymorph Mod I presented higher intrinsic dissolution rates in all the conditions tested, no statistical differences were noticed between the two polymorphs. This result can be attributed to the partial solution-mediated phase transformation from Mod I to Mod II, detected through X-ray powder diffraction and differential scanning calorimetry. Also, reliable intrinsic dissolution rate data were acquired for the polymorph Mod II. The dissolution method was validated, being considered stable, specific, linear, sensible, accurate and precise.

Aromatase (ARO) is an enzyme with potential diagnostic significance. Aberrant expression of aromatase in tissues is associated with a number of pathological conditions, including tumor of the breast, ovary, testes, liver, adrenal cortex and uterus, as well as endometriosis. Two methods for the highly selective determination of ARO concentration in human tissues by using of two different biosensors co-operating with the surface plasmon resonance imaging technique (SPRI) have been developed. One of the developed biosensors contains immobilised rabbit polyclonal antibody specific for aromatase (Y-ARO), while the other contains immobilized ARO inhibitor-exemestane (E-ARO). Both biosensors specifically bound ARO from analyzed samples. The analytically useful dynamic response range of both biosensors is between 0.3 and 5.0 ng mL−1. The detection limit (3S.D.) of both biosensors is 90 pg mL−1. Standard deviation of both biosensors is 1%. Recoveries of ARO spikes are between 97 and 108% for both biosensors under model conditions and for real samples. Albumin and alkaline phosphatase are tolerated for both biosensors up to 10,000 fold excess.

This paper dealt with the preparation and characterization of self — assembled monolayersSAM-s of 1-hexadecanethiole and mercapto acetic acid on the silver nanostructure and subsequently the immobilization with amino acid L-Tryptophane. In order to achieve it, we used the electrodeposition of silver onto nanostructured surface of paraffin impregnated graphite electrode (PIGE). Subsequently, we assembled SAM by choosing the 1-hexadecanethiole and mercaptoacetic acid. These two kinds of SAM underwent the functionalization by L-Tryptophan. The observations of silver on PIGE surfaces were performed by scanning electron microscope (SEM). For surface analysis of the SAM functionalized by L-tryphophan, the TOF-SIMS technique was chosen. Finally, the fragmented ions of the immobilized-L-Tryptophan SAM were determined on the basis of suggested residues and three-dimensional structure. The residues show that the ability of L-Tryptophan to build homogeneous structure is better by mercaptoacetic acid SAM structure than by 1-hexadecanethiol. It was observed that L-Tryptophan built compact surface, which, due its chemical properties, can represent very interesting side regarding biocompatibility, homochirality and robustness in the area of life science.

Binding of cationic gemini surfactants alkanediyl-a-ω-bis(dimethyldodecylammonium bromides) with variable polymethylene spacer length ranging from 2 to 12 methylene groups to DNA in NaBr solution is investigated utilizing the tensiometry method. A simple method is presented for calculating the number of surfactant molecules bound to DNA. The results are evaluated in terms of the gemini surfactant spacer length, showing that gemini molecules with either short spacers (2 methylene groups) or long spacers are most efficiently adsorbed to DNA. A weak adsorption to DNA was found for gemini molecules with a medium spacer length (6 methylene groups in the spacer). The binding properties of cationic gemini surfactants as a function of spacer length are consistent with the results obtained by other experimental methods (dynamic light scattering measurements, fluorescence spectroscopy), indicating identical adsorption behaviour of gemini molecules as a function of the spacer length.

[2+3] Cycloaddition reactions of the highly reactive (Z)-C-(3,4,5-trimethoxyphenyl)-N-methylnitrone with (E)-2-R-nitroethenes proceed under mild conditions and yield mixtures of stereoisomeric 2-methyl-3-(3,4,5-trimethoxyphenyl)-4-nitro-5-R-isoxazolidines. The effect of regiospecificity of the cycloadditions may be accounted for by the theory of electrophilicity indexes. Stereoselectivity, however, is determined by a compilation of steric and secondary orbital effects.

Artificial neural networks have proven to be a powerful tool for solving classification problems. Some difficulties still need to be overcome for their successful application to chemical data. The use of supervised neural networks implies the initial distribution of patterns between the pre-determined classes, while attribution of objects to the classes may be uncertain. Unsupervised neural networks are free from this problem, but do not always reveal the real structure of data. Classification algorithms which do not require a priori information about the distribution of patterns between the pre-determined classes and provide meaningful results are of special interest. This paper presents an approach based on the combination of Kohonen and probabilistic networks which enables the determination of the number of classes and the reliable classification of objects. This is illustrated for a set of 76 solvents based on nine characteristics. The resulting classification is chemically interpretable. The approach proved to be also applicable in a different field, namely in examining the solubility of C60 fullerene. The solvents belonging to the same group demonstrate similar abilities to dissolve C60. This makes it possible to estimate the solubility of fullerenes in solvents for which there are no experimental data

Novel electrochemical DNA-based biosensors with outer-sphere Nafion and chitosan protective membranes were prepared for the evaluation of antioxidant properties of beverages (beer, coffee, and black tea) against prooxidant hydroxyl radicals. A carbon working electrode of a screen-printed three-electrode assembly was modified using a layer-by-layer deposition technique with low molecular weight double-stranded DNA and a Nafion or chitosan film. The membrane-covered DNA biosensors were initially tested with respect to their voltammetric and impedimetric response after the incubation of the beverage and the medium exchange for the solution of the redox indicator [Fe(CN)6]3−/4−. While the Nafion-protected biosensor proved to be suitable for beer and black tea extracts, the chitosan-protected biosensor was successfully used in a coffee extract. Afterwards, the applicability was successfully verified for these biosensors for the detection of a deep degradation of the surface-attached DNA at the incubation in the cleavage agent (hydroxyl radicals generated via Fenton reaction) and for the evaluation of antioxidant properties of coffee and black tea extracts against prooxidant hydroxyl radicals. The investigation of the novel biosensors with a protective membrane represents a significant contribution to the field of electrochemical DNA biosensors utilization.

2-Ethylhexyl 4-methoxycinnamate (EHMC) is one of the most commonly used sunscreen ingredient. In this study we investigated photodegradation of EHMC in the presence of such common oxidizing and chlorinating systems as H2O2, H2O2/HCl, H2O2/UV, and H2O2/HCl/UV. Reaction products were detected by gas chromatography with a mass spectrometric detector (GC-MS). As a result of experimental studies chloro-substituted 4-methoxycinnamic acid (4-MCA), 4-methoxybenzaldehyde (4-MBA) and 4-methoxyphenol (4-MP) were identified. Experimental studies were enriched with DFT and MP2 calculations. We found that reactions of 4-MCA, 4-MBA and 4-MP with Cl2 and HOCl were in all cases thermodynamically favorable. However, reactivity indices provide a better explanation of the formation of particular chloroorganic compounds. Generally, those isomeric forms of mono- and dichlorinated compounds which exhibits the highest hardness were identified. Nucleophilicity of the chloroorganic compounds precursors were examined by means of the Fukui function.

Formation of stable complexes between xenon and podand polyoxyethylene ligands was ascertained. The complexation process was studied by 129Xe NMR titration, NMR diffusiometry and heteronuclear NOE measurements. The ligands studied form a 1:1 complexes with Xe(0). Their stability constants depend on the ligand structure, i.e., polyoxyethylene chain length, number of complexating polyether units and the topology of the anchoring centre.