Band 11, Heft 1

We perform converged high precision variational calculations to determine the frequencies of the vibrational levels in S0 HDCO, extending up to 5000 cm−1 of vibrational excitation energy. For these calculations we use our specific vibrational method (recently employed for studies on H2CO and D2CO), consisting of a combination of a search/selection algorithm and a Lanczos iteration procedure and based on the Martin, Lee, Taylor potential energy surface for formaldehyde. The calculated level structure is compared to the recently measured frequencies by Ellsworth et al. in order to improve their assignments and further clarify the vibrational mixing pattern and vibrational resonances in HDCO that are very different from the other more symmetric formaldehyde species H2CO and D2CO studied recently.

The title compound, trans-K2[Co(C2O4)2(H2O)2]·4H2O, was synthesised, and characterised by elemental analysis. Acid dissociation constants for the complex were determined by potentiometric titration and calculated by STOICHIO program. The crystal structure of trans-K2[Co(C2O4)2(H2O)2]·4H2O was determined by X-ray diffraction studies. The asymmetric part of the unit cell contains one symmetric anion of oxalate and water molecule bound with Co(II) ion in crystallographic special position, one potassium cation and two molecules of water. Thermal properties of the complex were examined by thermogravimetric analysis (TGA). A decomposition mechanism is proposed on the basis of the results.

Environmental tobacco smoke (ETS) contains many toxic compounds which include substances classified as aldehydes (e.g. formaldehyde) and inorganic substances such as cyanide ions. The information on the determination of these compounds in water is available, but the monitoring data on the level of these substances in human body fluids are still lacking. In this work the procedure for determining cyanide ions and formaldehyde in samples of human nasal discharge by simple spectrophotometric technique is presented.

The conventional protocol for protein identification by electrospray ionization mass spectrometry (MS) is based on enzymatic digestion which renders peptides to be analyzed by liquid chromatography-MS and collision-induced dissociation (CID) multistage MS, in the so-called bottom-up approach. Though this method has brought a significant progress to the field, many limitations, among which, the low throughput and impossibility to characterize in detail posttranslational modifications in terms of site(s) and structure, were reported. Therefore, the research is presently focused on the development of procedures for efficient top-down fragmentation of intact protein ions. In this context, we developed here an approach combining fully automated chip-based-nanoelectrospray ionisation (nanoESI), performed on a NanoMate robot, with electron transfer dissociation (ETD) for peptide and top-down protein sequencing and identification. This advanced analytical platform, integrating robotics, microfluidics technology, ETD and alternate ETD/CID, was tested and found ideally suitable for structural investigation of peptides and modified/functionalized peptides as well as for top-down analysis of medium size proteins by tandem MS experiments of significantly increased throughput and sensitivity. The obtained results indicate that NanoMate-ETD and ETD/CID may represent a viable alternative to the current MS strategies, with potential to develop into a method of routine use for high throughput top-down proteomics.

Facile surface modification of polyester films was performed via chemical solutions treatment. Surface hydrolysis was carried out by means of sodium hydroxide solutions, leading to the formation of carboxylate groups. Three commercial polyester films of 100 μm in thickness were used in this work: AryLite™, Mylar™, and Teonex™, hydrolysis time being the main modification parameter. FTIR-ATR analysis, topography and contact angle (CA) measurements, surface free energy (SFE) and T-Peel adhesion tests were carried out to characterize the modified films. A quantitative estimate of the carboxylates surface coverage as a function of treatment time was obtained through a supramolecular approach, i.e. the ionic self-assembly of a tetracationic porphyrin chromophore onto the film surface. The surface free energy and critical surface tension of the hydrolyzed polyesters was evaluated by means of Zisman, Saito, Berthelot and Owens-Wendt methods. It was shown that NaOH solution treatment increases roughness, polarity and surface free energy of polymers. As a result, T-Peel strengths for modified Mylar™ and Teonex™ films were respectively 2.2 and 1.8 times higher than that for the unmodified films, whereas AryLite™ adhesion test failed.

The soy bean process water that is a by-product of soy processing technology can be utilized with a hybrid separation system recommended and investigated in this work. The aims of the soy bean water processing are to i.) concentrate the valuable components of the soy process water and ii.) reuse its water content. Two hybrid separation systems are considered and investigated: ultrafiltration followed by nanofiltration and centrifugal separation followed by nanofiltration. These hybrid separation systems are new in the area of their current application. Experiments verify that centrifugal separation is a more appropriate pre-treatment method for the removal of suspended solids and for the preservation of the sucrose content of the soy bean process water than ultrafiltration. Total sucrose can be rejected by nanofiltration membrane forming a sugar-rich retentate that contains other valuable components, too. Both tested hybrid processes result in clear and reusable permeates with low chemical oxygen demand that can be recycled to the production process reducing its water consumption and improving its sustainability. The recommended new hybrid separation system, centrifugal separation followed by nanofiltration, proves to be successful in this area of the biochemical industry.

The flash points of three binary mixtures, containing n-heptane, o-xylene, m-xylene and ethylbenzene, were measured by Pensky-Martens closed cup tester. The experimental data were compared with the calculated values using Liaw’s Model with the application of Raoult’s Law and Wilson equation. These equations were in good qualitative agreement.

The current study describes the development of in silico models based on a novel alternative of the MTD-PLS methodology (Partial-Least-Squares variant of Minimal Topologic Difference) developed by our group to predict the inhibition of GSK-3β by indirubin derivatives. The new MTD-PLS methodology involves selection rules for the PLS equation coefficients based on physico-chemical considerations aimed at reducing the bias in the output information. These QSAR models have been derived using calculated fragmental descriptors relevant to binding including polarizability, hydrophobicity, hydrogen bond donor, hydrogen bond acceptor, volume and electronic effects. The MTD-PLS methodology afforded moderate but robust statistical characteristics (R2 Y(CUM) = 0.707, Q2(CUM) = 0.664). The MTD-PLS model obtained has been validated in terms of predictive ability by joined internal-external cross-validation applying Golbraikh-Tropsha criteria and Y-randomization test. The information supplied by the MTD-PLS model has been evaluated against Fujita-Ban outcomes that afforded a statistically reliable model (R2=0.923). Furthermore, the results originated from QSAR models were laterally validated with docking insights that suggested the substitution pattern for the design of new indirubins with improved pharmacological potential against GSK-3β. The new restriction rules introduced in this paper are applicable and provide reliable results in accordance with physico-chemical reality.

A method for obtaining carbonaceous adsorbents from pine cones by chemical activation with NaOH is described. Activated carbons were obtained by two methods of activation (physical mixing and impregnation) and two variants of thermal treatment. It has been shown that pine cones can be successfully used as cheap precursor of carbonaceous adsorbents of well-developed surface area, large pore volume and good sorption properties. All activated carbon samples obtained show strongly microporous structure and surface of acidic character. The best physicochemical properties and greatest sorption capacity towards iodine were found for the carbon samples obtained by physical mixing of the precursor with the activating agent and then subjected to thermal activation at 600°C.

The parameters of the double layer for tert-butanol adsorption determined in the supporting electrolytes: 2 mol dm−3, 3 mol dm−3 and 4 mol dm−3 NaClO4, show an increase of tert-butanol adsorption on the mercury electrode together with the increase of NaClO4 concentration. The adsorption of tert-butanol on the electrode takes place via the −CH3 group which is shown by the changes in the values of zero charge potentials, E z. On the basis of the analysis of the changes of relative surface excess values, Γ′, and the parameters determining the maximum adsorption, the process of adsorption in the discussed systems can be recognized as a physical process. Besides, it can be said that a major drawback in the process of adsorption of the organic substance on the electrode is to remove water from the electrode surface.

Cloud-point extraction (CPE) with RP-HPLC/DAD detection was used to develop a screen for six model basic drugs (paracetamol, promazine, amitriptyline, nortriptyline, clomipramine and chlorpromazine) in human plasma. These drugs’ varied hydrophobicities entail different affinities for the micelle-rich phase and CPE extraction efficiencies. Extraction recovery (except paracetamol) was above 80% and reproducibility (RSD%) ranged from 2.88 to 10.26 intraday and from 3.12 to 12.33 interday. The limits of detection were: 0.125 µg mL−1 (promazine and chlorpromazine), 0.25 µg mL−1 (amitriptyline and nortriptyline) and 0.5 µg mL−1 (paracetamol and clomipramine). The method was linear over the ranges: 0.125–1.0 µg mL−1 (promazine and chlorpromazine), 0.25–1.0 µg mL−1 (amitriptyline and nortriptyline), 0.5–1.0 µg mL−1 (clomipramine) and 0.5–10 µg mL−1 (paracetamol). The procedure is a good alternative to the SPE or LLE sample preparation usually used.

The influence of solution pH (in the range 3–9) on mixed silica-alumina suspension in the absence and presence of polyacrylic acid (PAA) was studied. The composition of the adsorbent was SiO2 (97%) and Al2O3 (3%). The turbidimetry method was applied to record changes in the stability of the investigated systems as a function of time. It was shown that the suspension without the polymer is less stable at pH 3, whereas at pH 6 and 9, the systems were stable. PAA with molecular weights 100 000 and 240 000 at pH 3 (improvement of system stability conditions) and PAA 2 000 at pH 6 (deterioration of suspension stability) have a great effect on the silica-alumina suspension stability. The stabilization-flocculation properties of polyacrylic acid are a result of a specific conformation of its chains on the solid surface where it depends on the solution pH and the polymer molecular weight.

In the last few years, silver nanoparticles have been proposed as a promising alternative for the label-free detection of proteins via metal-enhanced fluorescence. Generally, the aromatic amino acid tryptophan is most frequently used in this type of studies, because the intrinsic fluorescence of proteins is usually dominated by tryptophan emissions. In the present study, we evaluated the fluorescence behavior of tryptophan in the presence of a silver colloid with nanoparticles of 100 nm in diameter. The results showed that a nanoparticles concentration of 32 mg L−1 induced maximum fluorescence enhancement. However, the metal-enhanced fluorescence was dependent on the emission wavelength of tryptophan, and this phenomenon was closely related to the metal surface reabsorption process (inner filter effect), suggesting that the plasmon resonance reabsorption effect should be taken into account in analyses involving protein studies by metal-enhanced fluorescence.

A tridentate hydrazone precursor, N′-[1-(pyridin-2-yl)ethylidene]acetohydrazide (L) (1:1 refluxed product of acetichydrazide and 2-acetylpyridine), produced two octahedral CuII and NiII derivatives, [CuL2]·NO3 (1) and [NiL2]·ClO4·H2O (2). Both are subjected to X-ray diffraction system, and structural investigation shows that the central metal atom (CuII or NiII) adopts a distorted octahedral geometry with N4O2 donor sets by coordination of a pair of independent hydrazone precursors. Besides X-ray study, IR and UV-vis spectra, thermal analysis and room temperature magnetic moments are utilized for establishing significant characteristics of both complexes. It is apparent that the M-Npyridine bonds are slightly longer than the M-Nimino bonds, Cu1-N1 and Cu1-N4 [2.300(2) and 2.038(2) Å] for 1 and Ni1-N1 and Ni1-N4 [2.075(2) and 2.084(1) Å] for 2, Cu1-N2 and Cu1-N5 [2.062(1) and 1.932(1) Å] for 1 and Ni1-N2 and Ni1-N5 [2.008(2) and 1.975(2) Å] for 2, respectively. As per our observation, the effective magnetic moment value (µeff) is found to be 1.77 B.M. for 1 and 3.06 BM for 2, respectively.