Abstract
In this study, an investigation was carried out in order to determine the effect of annealing temperature on the mechanical properties of H13 steel. Heat treatments were applied on samples at different temperatures in both, the as-received and as-quenched conditions. In order to indicate the effect of heat treatment temperature, hardness measurements and tensile tests were performed at all chosen temperatures. At relatively high temperatures the mechanical properties of the H13 steel have been diminished considerably.
References
[1] H. Coldwell, R. Woods, M. Paul, P. Koshy, R. Dewes, D. Aspinwall: J. Mater. Process. Tech. 6374 (2003) 1.Suche in Google Scholar
[2] G. Li, X. Li, J. Wu: J. Mater. Process. Tech. 74 (1998) 23.10.1016/S0924-0136(97)00244-6Suche in Google Scholar
[3] W. Jiang, P. Molian: Surface and Coatings Tech. 135 (2001) 139.10.1016/S0257-8972(00)01075-6Suche in Google Scholar
[4] S. Ma, Y. Li, K. Xu: Surface and Coatings Tech. 137 (2001) 116.10.1016/S0257-8972(00)01073-2Suche in Google Scholar
[5] S.Y. Lee, J.W. Chung, C.W. Kim, J.G. Han, S.S. Kim, J.H. Lee: Surface and Coatings Tech. 94–95 (1997) 272.10.1016/S0257-8972(97)00351-4Suche in Google Scholar
[6] P.J. Maziasz, E.A. Payzant, M.E. Schlienger, K.M. McHugh: Scripta Mater. 39 (1998) 1471.10.1016/S1359-6462(98)00349-2Suche in Google Scholar
[7] W.D. Callister: Materials Science and Engineering, John Wiley & Sons, Inc., US (1997).Suche in Google Scholar
© 2005 Carl Hanser Verlag, München
Artikel in diesem Heft
- Frontmatter
- Articles Basic
- Kinetics of crystallization of amorphous Mg80Cu10Y10
- Thermodynamic description of the Al–Fe–Mg–Mn–Si system and investigation of microstructure and microsegregation during directional solidification of an Al–Fe–Mg–Mn–Si alloy
- Effect of Ca addition on precipitation in the Pb-4 wt.% Sn alloy
- Binary phase diagrams of the rare earth metals with zinc: the Tb–Zn, Ho–Zn and Er–Zn systems
- SEM study on the M7C3 carbide nucleation during eutectic solidification of high-chromium white irons
- Manifestations of dynamic strain ageing in 2090 Al–Li alloy
- Articles Applied
- Study on susceptibility of Al–Si alloy castings to surface refinement with TIG arc
- Grain refinement of an AZ63B magnesium alloy by an Al–1C master alloy
- Retrogression, reaging, and mechanical behaviour of a 1441 Al–Li–Cu–Mg–Zr alloy
- The variation of microstructure by α–β forging and its effect on the strength and ductility in Ti–6Al–4V alloy
- Interfacial reaction and shear strength of Sn–0.7Cu solder/electrolytic Ni joints with reflow time
- Effect of niobium on the mechanical properties of powder-metallurgy processed high-speed steels
- High temperature behaviour of H13 steel
- Notifications/Mitteilungen
- Personal/Personelles
- Conferences/Konferenzen
Artikel in diesem Heft
- Frontmatter
- Articles Basic
- Kinetics of crystallization of amorphous Mg80Cu10Y10
- Thermodynamic description of the Al–Fe–Mg–Mn–Si system and investigation of microstructure and microsegregation during directional solidification of an Al–Fe–Mg–Mn–Si alloy
- Effect of Ca addition on precipitation in the Pb-4 wt.% Sn alloy
- Binary phase diagrams of the rare earth metals with zinc: the Tb–Zn, Ho–Zn and Er–Zn systems
- SEM study on the M7C3 carbide nucleation during eutectic solidification of high-chromium white irons
- Manifestations of dynamic strain ageing in 2090 Al–Li alloy
- Articles Applied
- Study on susceptibility of Al–Si alloy castings to surface refinement with TIG arc
- Grain refinement of an AZ63B magnesium alloy by an Al–1C master alloy
- Retrogression, reaging, and mechanical behaviour of a 1441 Al–Li–Cu–Mg–Zr alloy
- The variation of microstructure by α–β forging and its effect on the strength and ductility in Ti–6Al–4V alloy
- Interfacial reaction and shear strength of Sn–0.7Cu solder/electrolytic Ni joints with reflow time
- Effect of niobium on the mechanical properties of powder-metallurgy processed high-speed steels
- High temperature behaviour of H13 steel
- Notifications/Mitteilungen
- Personal/Personelles
- Conferences/Konferenzen