Abstract
New experimental phase equilibria information about the Fe – C– Co – Cr – Mo– Si– V– W system and sub-systems are presented and used to modify the thermodynamic description of the system. The main interest was focused on the composition of the MC, M7C3 and M6C carbides and the necessary adjustment between the carbide-forming elements. A new set of thermodynamic parameter values describing the Gibbs energy of different phases was obtained utilizing phase equilibria data from model alloys. A number of calculated sections of binary systems and ternary carbide systems are presented and compared to both new and old experimental information. Calculations of commercial alloys to verify the improvements in multicomponent systems are also presented. The present calculation using the Thermo-Calc software shows much better agreement with the new experimental results than previous assessments.
References
[1] B. Sundman, B. Jansson, J.-O. Andersson: Calphad 9 (1985) 153.10.1016/0364-5916(85)90021-5Search in Google Scholar
[2] http://www.thermocalc.se/Products/databas_ny/TCFE3.htmSearch in Google Scholar
[3] L. Kaufman, H. Bernstein: Computer Calculations of Phase Diagrams, Academic Press, New York (1970).Search in Google Scholar
[4] N. Saunders, A.P. Miodownik, in: R.W. Cahn (Ed.), Calphad Calculations of Phase Diagrams, A Comprehensive Guide, Pergamon Materials Series, Vol. 1 (1998).Search in Google Scholar
[5] M. Hillert, L.-I. Staffansson: Acta Chem. Scand. 24 (1970) 3618.10.3891/acta.chem.scand.24-3618Search in Google Scholar
[6] P. Gustafson: Met. Trans. A 18 (1987) 175.10.1007/BF02825699Search in Google Scholar
[7] J. Bratberg, K. Frisk: Met. Mat. Trans. A 35 (2004) 3649.10.1007/s11661-004-0271-9Search in Google Scholar
[8] G. Inden: Physica B 103 (1981) 82.10.1016/0378-4363(81)91004-4Search in Google Scholar
[9] M. Hillert, M. Jarl: Calphad 2 (1978) 227.10.1016/0364-5916(78)90011-1Search in Google Scholar
[10] O. Redlich, A.T. Kister: Ind. Eng. Chem. 40 (1948) 345.10.1021/ie50458a036Search in Google Scholar
[11] J. Bratberg, K. Frisk: Calphad 26 (2002) 459.10.1016/S0364-5916(02)00057-3Search in Google Scholar
[12] A. Fernández Guillermet, G. Grimvall: Phys. Rev. B 40 (1989) 10582.10.1103/PhysRevB.40.10582Search in Google Scholar PubMed
[13] S.V. Nagender Naidu, A.M. Sriramamurthy, M. Vijayakumar, P. Rama Rao: J. Alloy Phase Diagrams 4 (1988) 191.Search in Google Scholar
[14] V.V. Baron, Yu.V. Efimov, E.M. Savitskii: Russ. Met. Fuels 1 (1960) 45.Search in Google Scholar
[15] E. Rudy: Compendium of Phase Diagram Data, Air Force Materials Laboratory, Wright-Patterson Air Force Base Ohio (1969), Rep. No.AFML-TR-65-2, Part V.Search in Google Scholar
[16] J. Bratberg, B. Sundman: J. of Phase Eq. 24 (2003) 495.10.1361/105497103772084534Search in Google Scholar
[17] A. Markström, B. Sundman, K. Frisk: Accepted in J. of Phase Eq. (2004).Search in Google Scholar
[18] K.B. Kuzma, T.F. Fedorov: Poroshk. Metall. 35 (1965) 62.Search in Google Scholar
[19] E. Rudy, Y.A. Chang, in: F. Benesovsky (Ed.), Plansee Seminar 1964, Metallwerk Plansee AG, Reutte/Tirol (1965) 786.Search in Google Scholar
[20] E. Rudy, F. Benesovsky, E. Rudy: Plansee Seminar, Reutte/Tirol (1962) 693.10.1007/BF01189609Search in Google Scholar
[21] B.-J. Lee: Calphad 16 (1992) 121.10.1016/0364-5916(92)90002-FSearch in Google Scholar
[22] C. Qiu: ISIJ International 32 (1992) 1117.10.2355/isijinternational.32.1117Search in Google Scholar
[23] H.-O. Andrén: Scripta Metall. 15 (1981) 749.10.1016/0036-9748(81)90013-2Search in Google Scholar
[24] X.M. Guan, H.Q. Ye: J. of Materials Science 15 (1980) 2935.10.1007/BF00550568Search in Google Scholar
[25] H. Wisell: Met. Trans. A 22 (1991) 1391.10.1007/BF02660671Search in Google Scholar
[26] K. Frisk, J. Bratberg, A. Markström: submitted to Computer Coupling of Phase Diagrams and Thermochemistry (2005).Search in Google Scholar
[27] A. Kusoffsky, B. Jansson: Calphad 21 (1997) 321.10.1016/S0364-5916(97)00033-3Search in Google Scholar
[28] H. Tuma, K. Löbl: Kovové Materialy 10 (1971) 221.Search in Google Scholar
[29] K.W. Andrews, H. Huges, D.J. Dyson: J. Iron Steel Inst. 210 (1972) 337.Search in Google Scholar
[30] J. Cadek, R. Freiwillig, H.-S. Hsien: Hutn. Listy. 17 (1962) 507.Search in Google Scholar
[31] K. Bungardt, E. Kunze, E. Horn: Arch. Eisenhüttenwes. 38 (1967) 309.10.1002/srin.196704185Search in Google Scholar
© 2005 Carl Hanser Verlag, München
Articles in the same Issue
- Frontmatter
- Articles Basic
- Ferroic materials and anomalous strains
- Neutron scattering, a powerful tool in material science considering superalloys as an example
- Investigation and modification of carbide sub-systems in the multicomponent Fe–C–Co–Cr–Mo–Si–V–W system
- Evolution of texture in pure magnesium during rolling
- Grain boundary radiotracer diffusion of 71Ge and 72Ga in Al and Al–Ga alloys
- Microstructures and thermal stability of metastable-phase precipitates formed in an Al–Cu alloy at 463 K
- Articles Applied
- The effect of instationary solidification conditions on the eutectic growth morphology in AlSi alloys
- Microstructural development in the heat-affected zone of a laser-cladded steel
- Microstructure formation in Ti–Si composite subjected to high temperature gradients
- Effect of natural ageing on the performance of pre-ageing to improve bake-hardening response of a twin-roll cast Al–Mg–Si alloy
- Residual stress evolution and near-surface microstructure after turning of the nickel-based superalloy Inconel 718
- Gefügeentwicklung in unter Druck hochverformten Metallen
- Articles History
- Alfred Wilm and the beginnings of Duralumin
- Notifications/Mitteilungen
- Personal/Personelles
- Books/Bücher
- News/Aktuelles
- Conferences/Konferenzen
Articles in the same Issue
- Frontmatter
- Articles Basic
- Ferroic materials and anomalous strains
- Neutron scattering, a powerful tool in material science considering superalloys as an example
- Investigation and modification of carbide sub-systems in the multicomponent Fe–C–Co–Cr–Mo–Si–V–W system
- Evolution of texture in pure magnesium during rolling
- Grain boundary radiotracer diffusion of 71Ge and 72Ga in Al and Al–Ga alloys
- Microstructures and thermal stability of metastable-phase precipitates formed in an Al–Cu alloy at 463 K
- Articles Applied
- The effect of instationary solidification conditions on the eutectic growth morphology in AlSi alloys
- Microstructural development in the heat-affected zone of a laser-cladded steel
- Microstructure formation in Ti–Si composite subjected to high temperature gradients
- Effect of natural ageing on the performance of pre-ageing to improve bake-hardening response of a twin-roll cast Al–Mg–Si alloy
- Residual stress evolution and near-surface microstructure after turning of the nickel-based superalloy Inconel 718
- Gefügeentwicklung in unter Druck hochverformten Metallen
- Articles History
- Alfred Wilm and the beginnings of Duralumin
- Notifications/Mitteilungen
- Personal/Personelles
- Books/Bücher
- News/Aktuelles
- Conferences/Konferenzen