Damping, Thermal and Mechanical Analyses of Polycarbonate/Cerium Oxide Composites for Structural Applications
-
R. Karuppasamy
und R. Muralikannan
Abstract
Polycarbonate (PC)/cerium (IV) oxide (CeO2) composites are prepared by a melt-compounding method using a twin-screw extruder. The effect of the CeO2 content on the damping property of the composites was investigated using scanning electron microscopy, dynamic mechanical analysis (DMA), and thermogravimetric analysis (TGA). In addition, the composites' mechanical properties were studied through tensile and impact tests. The DMA results revealed that the addition of CeO2 (0.5 wt%) improved the damping property of the composite. TGA showed that the thermal stability was improved when the CeO2 became 1 wt%. Mechanical tests revealed that both the tensile and impact strengths were substantially improved when 1 wt% CeO2 was added. Finally, it can be concluded that the 0.5 wt% CeO2-filled PC composite can be used as a structural damping material.
References
Abu Bakar, M. A., Ahmad, S. and Kuntjoro, W., “Effect of Matrix Modification on the Mechanical Properties of Short Carbon Fiber-Reinforced Epoxy Composites”, J. Reinf. Plast. Comp., 30, 357–361 (2011) 10.1177/0731684410396596Suche in Google Scholar
Al-Lafi, W., JieJ. and Mo, S., “Mechanical Response of Polycarbonate Nanocomposites to High Velocity Impact”, Eur. Polym. J., 85, 354–362 (2016) 10.1016/j.eurpolymj.2016.10.048Suche in Google Scholar
Avolio, R., Gentile, G., Cocca, M., Avella, M. and Errico, M. E., “Role of Silica Nanoparticles on Network Formation and Properties in Thermoset Polycarbonate Based Nanocomposites”, Polym. Test., 60, 388–395 (2017) 10.1016/j.polymertesting.2017.04.019Suche in Google Scholar
Bagotia, N., Veena, C. and Sharma, D. K., “Studies on Toughened Polycarbonate/Multiwalled Carbon Nanotubes Nanocomposites”, Composites Part B, 124, 101–110 (2017) 10.1016/j.compositesb.2017.05.037Suche in Google Scholar
Bagotia, N., Veena, C. and Sharma, D. K., “Synergistic Effect of Graphene/Multiwalled Carbon Nanotube Hybrid Fillers on Mechanical, Electrical and EMI Shielding Properties of Polycarbonate/Ethylene Methyl Acrylate Nanocomposites”, Composites Part B, 159, 378–388 (2019) 10.1016/j.compositesb.2018.10.009Suche in Google Scholar
Charde, S. J., Sonawane, S. S., Sonawane, S. H. and Navin, S., “Influence of Functionalized Calcium Carbonate Nanofillers on the Properties of Melt-Extruded Polycarbonate Composites”, Chem. Eng. Commun., 205, 492–505 (2018) 10.1080/00986445.2017.1404459Suche in Google Scholar
Chen, S., Wang, Q. and Wang, T., “Mechanical, Damping, and Thermal Properties of Calcium Sulfate Whisker-Filled Castor Oil-Based Polyurethane/Epoxy IPN Composites”, J. Reinf. Plast. Comp., 30, 509–515 (2011) 10.1177/0731684411398539Suche in Google Scholar
Chiu, F.-C., “Poly(vinylidene fluoride)/Polycarbonate Blend-Based Nanocomposites with Enhanced Rigidity–Selective Localization of Carbon Nanofillers and Organoclay”, Polym. Test., 62, 115–123 (2017) 10.1016/j.polymertesting.2017.06.018Suche in Google Scholar
Cho, B. G., Hwang, S. H. and Park, Y. B., “Fabrication and Characterization of Carbon Nanotube/Carbon Fiber/Polycarbonate Multiscale Hybrid Composites”, Composites Research, 29, 269–275 (2016) 10.7234/composres.2016.29.5.269Suche in Google Scholar
Feng, J., Hao, J.-W., Du, J.-X. and Yang, R.-J., “Effects of Organoclay Modifiers on the Flammability, Thermal and Mechanical Properties of Polycarbonate Nanocomposites Filled with a Phosphate and Organoclays”, Polym. Degrad. Stab., 97, 108–117 (2012) 10.1016/j.polymdegradstab.2011.09.019Suche in Google Scholar
Guo, M.: Dynamic Mechanical Thermal Analysis of Polymer Composites, PRC Press, Beijing, (2002)Suche in Google Scholar
Harris, C. M., PiersolA. G.: Harris' Shock and Vibration Handbook, McGraw-Hill, New York (2002)Suche in Google Scholar
Hu, R., Dimonie, V. L., El-Aasser, M. S., Pearson, R. A., Hiltner, A., Mylonakis, S. G. and Sperling, L. H., “Multicomponent Latex IPN Materials: 2. Damping and Mechanical Behavior”, J. Polym. Sci., Part B: Polym. Phys., 35, 1501–1514 (1997) 10.1002/(SICI)1099-0488(19970730)35:10<1501::AID-POLB4>3.0.CO;2-USuche in Google Scholar
Huang, X., Lin, S., Shang, J., He, W. and Lan, J., “Mechanical, Thermal, and Ultraviolet Resistance Properties of Poly(ether–ester)/Cerium Oxide (CeO2) Composite Fibers”, J. Reinf. Plast. Comp., 33, 1207–1215 (2014) 10.1177/0731684413518826Suche in Google Scholar
Li, Z.-H., Hu, J.-K., Li, Y.-B. and Jun Liu, J., “Polyaniline/Zinc/Cerium Nitrate Pigment for Epoxy Based Anticorrosion Coatings”, React. Funct. Polym., 131, 22–28 (2018) 10.1016/j.reactfunctpolym.2018.07.002Suche in Google Scholar
Liu, Y.-H., He, H.-M., Wang, Z.-Y., Zheng, Y.-P. and Hu, J., “Study on Dental Plastic IPN Post Composite”, J. Reinf. Plast. Comp., 29, 2684–2690 (2010) 10.1177/0731684409348977Suche in Google Scholar
Ma, C., Chen, E., Sun, T., Shi, S. and Fang, Q., “Preparation and Characterization of Tetrapod-shaped ZnO Whisker Filled Polyurethane Cross-Linked Epoxy/Polyurethane Damping Composites”, J. Reinf. Plast. Comp., 31, 1564–1575 (2012) 10.1177/0731684412446856Suche in Google Scholar
Parhizkar, N., Bahram. R. and Taghi, S., “The Epoxy Coating Interfacial Adhesion and Corrosion Protection Properties Enhancement through Deposition of Cerium Oxide Nanofilm Modified by Graphene Oxide”, J. Ind. Eng. Chem., 64, 402–419 (2018) 10.1016/j.jiec.2018.04.003Suche in Google Scholar
Piness, J., Knauer, K. and Wiggins, J., “Novel POSS-Cerium Oxide Thermoset Nanocomposites for UV Degradation Mitigation”, AIAA SPACE 2015 Conference and Exposition, p. 4639 (2015) 10.2514/6.2015-4639Suche in Google Scholar
Qin, C. L., CaiW. M., CaiJ., TangD. Y., ZhangJ. S. and QinM., “Damping Properties and Morphology of Polyurethane/Vinyl Ester Resin Interpenetrating Polymer Network”, Mater. Chem. Phys., 85, 402–409 (2004) 10.1016/j.matchemphys.2004.01.019Suche in Google Scholar
Sampreeth, T., Al-Maghrabi, M. A., Bahuleyan, B. K. and Ramesan, M. T., “Synthesis, Characterization, Thermal Properties, Conductivity, and Sensor Application Study of Polyaniline/Cerium-Doped Titanium Dioxide Nanocomposites”, J. Mater. Sci., 53, 591–603 (2018) 10.1007/s10853-017-1505-8Suche in Google Scholar
Sibeko, M. A., Luyt, A. S. and Saladino, M. L., “Thermomechanical Properties and Thermal Degradation Kinetics of Poly(methyl methacrylate)(PMMA) and Polycarbonate (PC) Filled with Cerium-Doped Yttrium Aluminium Garnet (Ce: YAG) Prepared by Melt Compounding”, Polym. Bull., 74, 2841–2859 (2017) 10.1007/s00289-016-1870-5Suche in Google Scholar
Song, J., Wu, G., Shi, J., Ding, Y., Chen, G. and Li, Q., “Properties and Morphology of Interpenetrating Polymer Networks Based on Poly(Urethane-Imide) and Epoxy Resin”, Macromol. Res., 18, 944–950 (2010) 10.1007/s13233-010-1009-8Suche in Google Scholar
Song, M., Hourston, D. J. and Schafer, F.-U., “Correlation between Mechanical Damping and Interphase Content in Interpenetrating Polymer Networks”, J. Appl. Polym. Sci., 81, 2439–2442 (2001) 10.1002/app.1685Suche in Google Scholar
Tan, Y., Wang, X. and Wu, D., “Preparation, Microstructures, and Properties of Long-Glass-Fiber-Reinforced Thermoplastic Composites Based on Polycarbonate/Poly(butylene terephthalate) Alloys”, J. Reinf. Plast. Compos., 34, 1804–1820 (2015) 10.1177/0731684415599071Suche in Google Scholar
Tian, N.-N., Liu, T., Zhong, W.-H. and Bahr, D. F., “The Nanomechanical Behavior of a Graphite Nanoplatelet/Polycarbonate Nanocomposite”, Polym. Test., 47, 87–91 (2015) 10.1016/j.polymertesting.2015.08.007Suche in Google Scholar
Tian, S., Cui, F. and Wang, X., “New Type of Piezo-Damping Epoxy-Matrix Composites with Multi-Walled Carbon Nanotubes and Lead Zirconate Titanate”, Mater. Lett., 62, 3859–3861 (2008) 10.1016/j.matlet.2008.05.003Suche in Google Scholar
Tiwari, S. K., Oraon, R., De Adhikari, A. and Nayak, G. C., “A Thermomechanical Study on Selective Dispersion and Different Loading of Graphene Oxide in Polypropylene/Polycarbonate Blends”, J. Appl. Polym. Sci., 134, 45062 (2017) 10.1002/app.45062Suche in Google Scholar
Urayama, K., Miki, T., Takigawa, T. and Kohjiya, S., “Damping Elastomer Based on Model Irregular Networks of End-Linked Poly(dimethylsiloxane)”, Chem. Mater., 16, 173–178 (2004) 10.1021/cm0343507Suche in Google Scholar
Wang, S.-G., Gao, R. and Zhou, K.-Q., “The Influence of Cerium Dioxide Functionalized Reduced Graphene Oxide on Reducing Fire Hazards of Thermoplastic Polyurethane Nanocomposites”, J. Colloid Interface Sci., 536, 127–134 (2018) 10.1016/j.jcis.2018.10.052Suche in Google Scholar
Wang, Y., Liu, Y., Zhang, Z., Wang, C., Shi, S. and Chen, X., “Mechanical Properties of Cerium Oxide-Modified Vulcanised Natural Rubber at Elevated Temperature”, Plastics Rubber and Composites, 46, 306–313 (2017) 10.1080/14658011.2017.1343521Suche in Google Scholar
Zhang, F., Liao, L., Wang, Y., Wang, Y., Huang, H., Li, P., Peng, Z. and Zeng, R., “Reinforcement of Natural Rubber Latex with Silica Modified by Cerium Oxide: Preparation and Properties”, J. Rare Earth, 34, 221–226 (2016) 10.1016/S1002-0721(16)60017-0Suche in Google Scholar
Zheng, J., Ozisik, R. and Siegel, R. W., “Disruption of Self-Assembly and Altered Mechanical Behavior in Polyurethane/Zinc Oxide Nanocomposites”, Polymer, 46, 10873–10882 (2005) 10.1016/j.polymer.2005.08.082Suche in Google Scholar
© 2019, Carl Hanser Verlag, Munich
Artikel in diesem Heft
- Contents
- Contents
- Regular Contributed Articles
- Synthesis of a Novel Ladder Poly(azomethine-ester) Based on PET Waste Bottles
- Identifying Melt Processing Conditions for a Polyacrylonitrile Copolymer Plasticized with Water, Acetonitrile and their Mixtures
- Optimization of Injection Stretch Blow Molding: Part I – Defining Part Thickness Profile
- Damping, Thermal and Mechanical Analyses of Polycarbonate/Cerium Oxide Composites for Structural Applications
- On Induced Properties and Self Heating during Free Blowing of PET Preform
- Study of Rheology and Plug Assist Thermoforming of Linear and Branched PP Homopolymer and Impact Copolymer
- Micro-Residual Stress Measurement in Nanocomposite Reinforced Polymers
- Influence of Process Parameters on the Morphologies of Micro-Injection Molded Polyformaldehyde Parts
- Preparation and Characterization of Hydrophobic Flat Sheet Membranes Based on a Recycled Polymer
- PPS News
- PPS News
- Seikei Kakou Abstracts
- Seikei-Kakou Abstracts
Artikel in diesem Heft
- Contents
- Contents
- Regular Contributed Articles
- Synthesis of a Novel Ladder Poly(azomethine-ester) Based on PET Waste Bottles
- Identifying Melt Processing Conditions for a Polyacrylonitrile Copolymer Plasticized with Water, Acetonitrile and their Mixtures
- Optimization of Injection Stretch Blow Molding: Part I – Defining Part Thickness Profile
- Damping, Thermal and Mechanical Analyses of Polycarbonate/Cerium Oxide Composites for Structural Applications
- On Induced Properties and Self Heating during Free Blowing of PET Preform
- Study of Rheology and Plug Assist Thermoforming of Linear and Branched PP Homopolymer and Impact Copolymer
- Micro-Residual Stress Measurement in Nanocomposite Reinforced Polymers
- Influence of Process Parameters on the Morphologies of Micro-Injection Molded Polyformaldehyde Parts
- Preparation and Characterization of Hydrophobic Flat Sheet Membranes Based on a Recycled Polymer
- PPS News
- PPS News
- Seikei Kakou Abstracts
- Seikei-Kakou Abstracts