Startseite Influence of Process Parameters on the Morphologies of Micro-Injection Molded Polyformaldehyde Parts
Artikel Open Access

Influence of Process Parameters on the Morphologies of Micro-Injection Molded Polyformaldehyde Parts

  • L.-X. Wang , D.-F. Wang , L. Jiang , N. Bian , Q. Li und C.-Y. Shen
Veröffentlicht/Copyright: 19. Juni 2019
Artikel downloaden (PDF)
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Polymer Processing
Aus der Zeitschrift International Polymer Processing Band 34 Heft 3

Received: 2018-10-23
Accepted: 2019-02-10
Published Online: 2019-06-19
Published in Print: 2019-07-03

© 2019, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Synthesis of a Novel Ladder Poly(azomethine-ester) Based on PET Waste Bottles
  5. Identifying Melt Processing Conditions for a Polyacrylonitrile Copolymer Plasticized with Water, Acetonitrile and their Mixtures
  6. Optimization of Injection Stretch Blow Molding: Part I – Defining Part Thickness Profile
  7. Damping, Thermal and Mechanical Analyses of Polycarbonate/Cerium Oxide Composites for Structural Applications
  8. On Induced Properties and Self Heating during Free Blowing of PET Preform
  9. Study of Rheology and Plug Assist Thermoforming of Linear and Branched PP Homopolymer and Impact Copolymer
  10. Micro-Residual Stress Measurement in Nanocomposite Reinforced Polymers
  11. Influence of Process Parameters on the Morphologies of Micro-Injection Molded Polyformaldehyde Parts
  12. Preparation and Characterization of Hydrophobic Flat Sheet Membranes Based on a Recycled Polymer
  13. PPS News
  14. PPS News
  15. Seikei Kakou Abstracts
  16. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.3776
Creative Commons
BY 4.0

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Synthesis of a Novel Ladder Poly(azomethine-ester) Based on PET Waste Bottles
  5. Identifying Melt Processing Conditions for a Polyacrylonitrile Copolymer Plasticized with Water, Acetonitrile and their Mixtures
  6. Optimization of Injection Stretch Blow Molding: Part I – Defining Part Thickness Profile
  7. Damping, Thermal and Mechanical Analyses of Polycarbonate/Cerium Oxide Composites for Structural Applications
  8. On Induced Properties and Self Heating during Free Blowing of PET Preform
  9. Study of Rheology and Plug Assist Thermoforming of Linear and Branched PP Homopolymer and Impact Copolymer
  10. Micro-Residual Stress Measurement in Nanocomposite Reinforced Polymers
  11. Influence of Process Parameters on the Morphologies of Micro-Injection Molded Polyformaldehyde Parts
  12. Preparation and Characterization of Hydrophobic Flat Sheet Membranes Based on a Recycled Polymer
  13. PPS News
  14. PPS News
  15. Seikei Kakou Abstracts
  16. Seikei-Kakou Abstracts
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 26.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/217.3776/html
Button zum nach oben scrollen