Influence of Stitching Parameters on the Joint Strength of Welded-Stitched Composites

References

Aymerich, F., Pani, C. and Priolo, P., “Damage Response of Stitched Cross-Ply Laminates under Impact Loadings”, Eng. Fract. Mech., 74, 500–514 (2007) 10.1016/j.engfracmech.2006.05.012Suche in Google Scholar

Aymerich, F., Priolo, P. and Sun, C. T., “Static and Fatigue Behaviour of Stitched Graphite/Epoxy Composite Laminates”, Compos. Sci. Technol., 63, 907–917 (2003) 10.1016/S0266-3538(02)00314-7Suche in Google Scholar

Baur, E., Brinkmann, S., Osswald, T. and Schmachtenberg, E.: Saechtling-Kunststoff-Taschenbuch, 31st Edition, Hanser, Munich, p. 474 (2013) 10.3139/9783446437296Suche in Google Scholar

Beier, U., Fischer, F., Sandler, J. K. W., Altstädt, V., Weimer, C. and Buchs, W., “Mechanical Performance of Carbon Fibre-Reinforced Composites Based on Stitched Preforms”, Composites Part A, 38, 1655–1663 (2007) 10.1016/j.compositesa.2007.02.007Suche in Google Scholar

Cherif, C.: Textile Werkstoffe für den Leichtbau: Techniken – Verfahren – Materialien – Eigenschaften”, 1st Edition, Springer, Berlin Heidelberg (2011) 10.1007/978-3-642-17992-1Suche in Google Scholar

Dal, V., Ertinmaz Yargici, M., and Salman, S., “Analyzing the Effects of Sewing Machine Needle Coating Materials on the Needle's Heating during Sewing”, Tekstil Ve Konfeksiyon, 24, 393–398 (2014)Suche in Google Scholar

Domininghaus, H., Elsner, P., “Kunststoffe: Eigenschaften und Anwendungen; mit 275 Tabellen”, 8th Edition, Springer, Heidelberg (2012) 10.1007/978-3-642-16173-5Suche in Google Scholar

Friedrich, H. E.: Leichtbau in der Fahrzeugtechnik, 2nd Edition, Springer Vieweg, Wiesbaden (2017) 10.1007/978-3-658-12295-9Suche in Google Scholar

Gröschel, C., Drummer, D., “Stoff- Und Formschlüssiges Fügen Endlosfaserverstärkter Thermoplaste”, SAMPE Symposium, Fürth, Germany (2016)Suche in Google Scholar

Gröschel, C., Seefried, A., and Drummer, D., “Nähschweißen Endlosfaserverstärkter Thermoplaste”, Fügen von Kunststoffen, 11, 26–32 (2017)Suche in Google Scholar

Habenicht, G.: Kleben Grundlagen, Technologien, Anwendungen, 6th Edition, Springer, Berlin (2009)10.1007/978-3-540-85266-7Suche in Google Scholar

Hoppe, R., “Die Zukunft der Kohlefaser-Composites”, Plastverarbeiter, (2014), https://www.plastverarbeiter.de/46317/die-zukunft-der-kohlefaser-composites/Suche in Google Scholar

Hosur, M. V., Adya, M., Alexander, J., Jeelani, S., Vaidya, U. and Mayer, A., “Studies on Impact Damage Resistance of Affordable Stitched Woven Carbon/Epoxy Composite Laminates”, J. Reinf. Plast. Compos., 22, 927–952 (2003) 10.1177/0731684403022010005Suche in Google Scholar

Li, Q., Liasi, E., Zou, H. J. and Du, R., “A Study on the Needle Heating in Heavy Industrial Sewing – Part 1: Analytical Models”, International Journal of Clothing Science and Technology, 13, 87–105 (2001a) 10.1108/09556220110390700Suche in Google Scholar

Li, Q., Liasi, E., Simon, D. and Du, R., “A Study on the Needle Heating in Heavy Industrial Sewing, Part 2: Finite Element Analysis and Experiment Verification”, International Journal of Clothing Science and Technology, 13, 351–367 (2001b) 10.1108/09556220110390700Suche in Google Scholar

Mazari, A., Bal, K. and Havelka, A., “Prediction of Needle Heating in an Industrial Sewing Machine”, Text. Res. J., 86, 302–310 (2015) 10.1177/0040517515586160Suche in Google Scholar

Mouritz, A. P., Cox, B. N., “A Mechanistic Approach to the Properties of Stitched Laminates”, Composites Part A, 31, 1–27 (2000) 10.1016/S1359-835X(99)00056-1Suche in Google Scholar

Neitzel, M.: Handbuch Verbundwerkstoffe Werkstoffe, Verarbeitung, Anwendung, 2nd Edition, Hanser, München (2014)10.3139/9783446436978.fmSuche in Google Scholar

Pora, J.: Composite Materials in the Airbus A380 – From History to Future –, Society of Manufacturing Engineers, Blagnac (2000)Suche in Google Scholar

Schürmann, H., “Konstruieren mit Faser-Kunststoff-Verbunden”, Springer, Heidelberg, Berlin, New York (2007)Suche in Google Scholar

Stokes, V. K., “Vibration Welding of Thermoplastics. Part III: Strength of Polycarbonate Butt Welds”, Polym. Eng. Sci., 28, 989–997 (1988) 10.1002/pen.760281104Suche in Google Scholar

Tan, K. T., Watanabe, N. and Iwahori, Y., “Experimental Investigation of Bridging Law for Single Stitch Fibre Using Interlaminar Tension Test”, Compos. Struct., 92, 1399–1409 (2010) 10.1016/j.compstruct.2009.11.018Suche in Google Scholar

Tan, K. T., Watanabe, N. and Iwahori, Y., “Stitch Fiber Comparison for Improvement of Interlaminar Fracture Toughness in Stitched Composites”, J. Reinf. Plast. Compos., 30, 99–109 (2011) 10.1177/0731684410383065Suche in Google Scholar

Tan, K. T., Watanabe, N., Iwahori, Y. and Ishikawa, T., “Effect of Stitch Density and Stitch Thread Thickness on Compression after Impact Strength and Response of Stitched Composites”, Compos. Sci. Technol., 72, 587–598 (2012) 10.1016/j.compscitech.2012.01.003Suche in Google Scholar

Tan, K. T., Watanabe, N. and Iwahori, Y., “Effect of Stitch Density and Stitch Thread Thickness on Low-Velocity Impact Damage of Stitched Composites”, Composites Part A, 41, 1857–1868 (2010) 10.1016/j.compositesa.2010.09.007Suche in Google Scholar

Webb, M.: Some Observations on the Behaviour of Superimposed and Lap Sewn Joints, Royal Aircraft Establishment, Farnborough, Hants, UK (1974)Suche in Google Scholar

Weimer, C., Mitschang, P., “Aspects of the Stitch Formation Process on the Quality of Sewn Multi-Textile-Preforms”, Composites Part A, 32, 1477–1484 (2001) 10.1016/S1359-835X(01)00046-XSuche in Google Scholar

Witten, E., Kraus, T.: Composites-Markenbericht 2015: Marktentwicklung, Trends, Ausblick und Herausforderungen, AVK – Industrievereinigung Verstärkte Kunststoffe e.V., Frankfurt am Main (2015)Suche in Google Scholar

Witten, E., Kraus, T. and Assmann, W.: Handbuch Faserverbundkunststoffe/Composites: Grundlagen, Verarbeitung, Anwendungen”, 4th Edition, Springer Vieweg, Wiesbaden (2014)Suche in Google Scholar

Xiaoquan, C., Al-Mansour, A. M., Zhengneng, L. and Chenghe, K., “Compression Strength of Stitched Laminates after Low-Velocity Impact”, J. Reinf. Plast. Compos., 24, 935–947 (2005) 10.1177/0731684405048193Suche in Google Scholar

Yudhanto, A., Watanabe, N., Iwahori, Y. and Hoshi, H., “Compression Properties and Damage Mechanisms of Stitched Carbon/Epoxy Composites”, Compos. Sci. Technol., 86, 52–60 (2013) 10.1016/j.compscitech.2013.07.002Suche in Google Scholar

Yudhanto, A., Watanabe, N., Iwahori, Y. and Hoshi, H., “Effect of Stitch Density on Tensile Properties and Damage Mechanisms of Stitched Carbon/Epoxy Composites”, Composites Part B, 46, 151–165 (2013) 10.1016/j.compositesb.2012.10.003Suche in Google Scholar