On the Prediction of Pantographing that Occurs between Reinforcement Cords Embedded within Uncured Rubber Layers during Molding of Tires

Articles in the same Issue

1. Contents
2. Contents
3. Review Article
4. Extensional Rheology and Processing of Polymeric Materials
5. Regular Contributed Articles
6. Investigation of the Effect of Filler Concentration on the Flow Characteristics of Filled Polyethylene Melts
7. Preparation and Characterization of Biodegradable Polylactic Acid/Polypropylene Spun-Bonded Nonwoven Fabric Slices
8. Flow Behavior of a Polypropylene Melt in Capillary Dies
9. Material Behavior in the Plasticizing Cylinder of an Injection Molding of the Vent Type
10. Computer Flow Simulation of Moffatt Eddies in Single Screw Extrusion
11. Crystallization Kinetics and Multiple Melting Behavior of Biodegradable Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)
12. Wood-Polypropylene Composites: Influence of Processing on the Particle Shape and Size in Correlation with the Mechanical Properties Using Dynamic Image Analysis
13. Selecting Optimal Molding and Material Conditions of Reinforced Polymeric Nanocomposites with MWCNT Using a Multi-Criteria Decision Making Model
14. Effect of ZnO on Mechanical and Electrical Properties of Peroxide Cured EPDM
15. Influence of Stitching Parameters on the Joint Strength of Welded-Stitched Composites
16. Effect of Process Parameters on Shear Layer Thickness in Injection Molded Short-Glass Fiber Reinforced Polypropylene
17. Preparation and Property Investigation of Epoxy/Amine Micro/Nanocapsule Based Self-healing Coatings
18. On the Prediction of Pantographing that Occurs between Reinforcement Cords Embedded within Uncured Rubber Layers during Molding of Tires
19. PPS News
20. PPS News
21. Seikei Kakou Abstracts
22. Seikei-Kakou Abstracts