Electrical and Mechanical Properties of Antistatic Poly(vinyl chloride) Composites Filled with Silver Plated Hollow Glass Microspheres
-
M. Y. Zhang
Abstract
Antistatic poly(vinyl chloride) (PVC) composites filled with silver plated hollow glass microspheres (Ag-HGMs) were prepared using the melt-mixing method. Electrical resistivity and mechanical properties of the Ag-HGMs/PVC composites were subsequently investigated. The results show that the HGMs were successfully coated with a uniform and compact silver layer. With increasing Ag-HGMs content, the volume resistivity of Ag-HGMs/PVC composites decreases nonlinearly. With an Ag-HGMs content of about 120 phr, reaching the percolation concentration, the composites meet the antistatic requirements for commercial antistatic PVC materials. Furthermore, the tensile strength of Ag-HGMs/PVC composites decreases with increasing content of Ag-HGMs, while the impact strength increases with increasing content of Ag-HGMs from 0 phr to 150 phr. We especially found that, with a Ag-HGMs content of 20 phr, Ag-HGMs/PVC composites exhibit great impact strength.
References
Aljaafari, A., Abu-Abdeen, M. and Aljaafari, M., “Mechanical and Electrical Properties of Poly(vinyl chloride) Loaded with Carbon Nanotubes and Carbon Nanopowder”, J. Thermoplast. Compos. Mater., 25, 679–699 (2011a) 10.1177/0892705711412650Suche in Google Scholar
Aljaafari, A. A., Ibrahim, S. S. and El-Brolossy, T. A., “Thermophysical and Electrical Characterization of PVC-SWNT Nanocomposites”, Composites Part A, 42, 394–399 (2011b) 10.1016/j.compositesa.2010.12.008Suche in Google Scholar
Ayturk, M. E., Ma, Y. H., “Electroless Pd and Ag Deposition Kinetics of the Composite Pd and Pd/Ag Membranes Synthesized From Agitated Plating Baths”, J. Membrane. Sci., 330, 233–245 (2009) 10.1016/j.memsci.2008.12.062Suche in Google Scholar
Broza, G., Piszczek, K., Schulte, K. and Sterzynski, T., “Nanocomposites of Poly(vinyl chloride) with Carbon Nanotubes (CNT)”, Compos. Sci. Technol., 67, 890–894 (2007) 10.1016/j.compscitech.2006.01.033Suche in Google Scholar
Cao, X. G., Zhang, H. Y., “Investigation into Conductivity of Silver-Coated Cenosphere Composites Prepared by a Modified Electroless Process”, Appl. Surf. Sci., 264, 756–760 (2013) 10.1016/j.apsusc.2012.10.116Suche in Google Scholar
Hu, Y., Mei, R., An, Z. and Zhang, J., “Silicon Rubber/Hollow Glass Microsphere Composites: Influence of Broken Hollow Glass Microsphere on Mechanical and Thermal Insulation Property”, Compos. Sci. Technol., 79, 64–69 (2013) 10.1016/j.compscitech.2013.02.015Suche in Google Scholar
Hu, Y. J., Zhang, H. Y., Cheng, X. L., Li, F., and Chen, T. L., “The Influence of Electroless-Silver Coated Cenosphere Powders on the Electromagnetic Shielding Interference Effectiveness and Mechanical Properties of the Silicone Rubber”, Adv. Mater. Res., 152, 1360–1365 (2011)Suche in Google Scholar
Hu, Y. J., Zhang, H. Y., Li, F., Cheng, X. L., and Chen, T. L., “Investigation into Electrical Conductivity and Electromagnetic Interference Shielding Effectiveness of Silicone Rubber Filled with Ag-Coated Cenosphere Particles”, Polym. Test., 29, 609–612 (2010) 10.1016/j.polymertesting.2010.03.009Suche in Google Scholar
Huang, Z., Chi, B., Guan, J. and Liu, Y., “Facile Method to Synthesize Silver Nanoparticles on the Surface of Hollow Glass Microspheres and their Microwave Shielding Properties”, RSC Adv., 4, 18645–18651 (2014) 10.1039/c4ra01617cSuche in Google Scholar
Jung, R., Yoon, S. H. and Kang, M., “Preparation of Carbon Nanotubes-Incorporated Polymeric Microspheres for Electrorheological Fluids”, Curr. App. Phys., 8, 807–809 (2008) 10.1016/j.cap.2007.04.033Suche in Google Scholar
Li, B., Yuan, J., An, Z. and Zhang, J., “Effect of Microstructure and Physical Parameters of Hollow Glass Microsphere on Insulation Performance”, Mater. Lett., 65, 1992–1994 (2011) 10.1016/j.matlet.2011.03.062Suche in Google Scholar
Liang, J.-Z., “Estimation of Thermal Conductivity for Polypropylene/Hollow Glass Bead Composites”, Composites Part B, 56, 431–434 (2014). 10.1016/j.compositesb.2013.08.072Suche in Google Scholar
Liang, T. X, Guo, W. L., Yan, Y. H. and Tang, C. H., “Electroless Plating of Silver on Graphite Powders and the Study of its Conductive Adhesive”, Int. J. Adhes. Adhes., 28, 55–58 (2008) 10.1016/j.ijadhadh.2007.03.006Suche in Google Scholar
Mamunya, Y., Boudenne, A., Lebovka, N., Ibos, L., Candau, Y. and Lisunova, M., “Electrical and Thermophysical Behaviour of PVC-MWCNT Nanocomposites”, Compos. Sci. Technol., 68, 1981–1988 (2008) 10.1016/j.compscitech.2007.11.014Suche in Google Scholar
Meng, X.-F., Shen, X.-Q. and Liu, W., “Synthesis and Characterization of Co/Cenosphere Core-Shell Structure Composites”, Appl. Surf. Sci., 258, 2627–2631 (2012) 10.1016/j.apsusc.2011.10.108Suche in Google Scholar
Pang, J., Li, Q., Wang, W., Xu, X. and Zhai, J., “Preparation and Characterization of Electroless Ni-Co-P Ternary Alloy on Fly Ash Cenospheres”, Surf. Coat. Technol., 205, 4237–4242 (2011) 10.1016/j.surfcoat.2011.03.020Suche in Google Scholar
Poornaiah, B., Rambabu, B., Subrahmanyam, K. V. and Srinivasarao, Y., “Studies on Electrical Conductivity of PVC-Graphite Thick Film Resistors”, in Automation, Computing, Communication, Control and Compressed Sensing (Imac4s), 2013 International Multi-Conference on, IEEE, 480–482 (2013)10.1109/iMac4s.2013.6526459Suche in Google Scholar
Saad, A. L. G., Sayed, W. M., Ahmed, M. G. M. and Hassan, A. M., “Preparation and Properties of Some Filled Poly(vinyl chloride) Compositions”, J. Appl. Polym. Sci., 73, 2657–2670 (1999) 10.1002/(SICI)1097-4628(19990923)73:13<2657::AID-APP14>3.0.CO;2-7Suche in Google Scholar
Saadatabadi, N. M., Nateghi, M. R. and Borhanizarandi, M., “Fabrication and Characterization of Nanosilver Intercalated Graphene Embedded Poly(vinyl chloride) Composite Thin Films”, J. Polym. Res., 21, 1–9 (2014) 10.1007/s10965-014-0527-zSuche in Google Scholar
Singh, D., Singh, N. L., Qureshi, A., Gavade, C., Avasthi, D. K., Gulluoglu, A. N. and Phase, D. M., “Electrical and Thermal Studies on the Polyvinylchloride/Carbon Black Composites Induced by High Energy Ion Beam”, Integr. Ferroelectr., 117, 85–96 (2010) 10.1080/10584587.2010.489429Suche in Google Scholar
Tsui, C. P., Chen, D. Z., Tang, C. Y., Uskokovic, P. S. and Fan, J. P., “Prediction for Debonding Damage Process of Glass Beads-Reinforced Modified Polyphenylene Oxide under Simple Shear”, J. Mater. Process. Technol., 167, 429–437 (2005) 10.1016/j.jmatprotec.2005.06.012Suche in Google Scholar
Wang, H., Xie, G., Fang, M., Ying, Z., Tong, Y. and Zeng, Y., “Electrical and Mechanical Properties of Antistatic PVC Films Containing Multi-Layer Grapheme”, Composites Part B, 79, 444–450 (2015) 10.1016/j.compositesb.2015.05.011Suche in Google Scholar
Zhang, Z., Wang, C., Meng, Y. and Mai, K., “Synergistic Effects of Toughening of Nano-CaCo3 and Toughness of Β-Polypropylene”, Composites Part A, 43, 189–197 (2012) 10.1016/j.compositesa.2011.10.008Suche in Google Scholar
Zhu, B. L., Zheng, H., Wang, J., Ma, J., Wu, J. and Wu, R., “Tailoring of Thermal and Dielectric Properties of LDPE-Matrix Composites by the Volume Fraction, Density, and Surface Modification of Hollow Glass Microsphere Filler”, Composites Part B, 58, 91–102 (2014) 10.1016/j.compositesb.2013.10.029Suche in Google Scholar
© 2016, Carl Hanser Verlag, Munich
Artikel in diesem Heft
- Contents
- Contents
- Regular Contributed Articles
- Research and Application of Wireless Temperature Measurement Device in High Temperature Enclosed Environment
- Influence on Product Quality by pvT-Optimised Processing in Injection Compression Molding
- Effect of Plug Temperature on the Strain and Thickness Distribution of Components Made by Plug Assist Thermoforming
- Influence of Processing Parameters and Composition on the Effective Compatibilization of Polypropylene–Poly(ethylene terephthalate) Blends
- Impact Modification of Isotactic Polypropylene with Ethylene-Propylene Diene Monomer Rubber
- Impact Behavior of Continuous Biaxial Reinforced Composites Based on Bio-Polyamides and Man-Made Cellulose Fibres
- Preparation and Anti-Fouling Property of Acryloylmorpholine-Grafted PVDF Membrane: The Effect of Cross-Linking Agent
- Fine Filament Formation Behavior of Polymethylpentene and Polypropylene near Spinneret in Melt Blowing Process
- Fracture Toughness of PP/EPDM/Nano-Ternary Composites: The Role of Distribution of Inorganic Particles
- CO2 Laser Ablation of Microchannel on PMMA Substrate for Effective Fabrication of Microfluidic Chips
- A Novel Micro Wall Slip Model Based on Chain Length and Temperature
- Electrical and Mechanical Properties of Antistatic Poly(vinyl chloride) Composites Filled with Silver Plated Hollow Glass Microspheres
- Prototype System to Study the Effect of Weld Lines on the Performance of Extruded Profiles
- Extrudate Swell of High Density Polyethylenes in Slit (Flat) Dies
- PPS News
- PPS News
- Seikei Kakou Abstracts
- Seikei-Kakou Abstracts
Artikel in diesem Heft
- Contents
- Contents
- Regular Contributed Articles
- Research and Application of Wireless Temperature Measurement Device in High Temperature Enclosed Environment
- Influence on Product Quality by pvT-Optimised Processing in Injection Compression Molding
- Effect of Plug Temperature on the Strain and Thickness Distribution of Components Made by Plug Assist Thermoforming
- Influence of Processing Parameters and Composition on the Effective Compatibilization of Polypropylene–Poly(ethylene terephthalate) Blends
- Impact Modification of Isotactic Polypropylene with Ethylene-Propylene Diene Monomer Rubber
- Impact Behavior of Continuous Biaxial Reinforced Composites Based on Bio-Polyamides and Man-Made Cellulose Fibres
- Preparation and Anti-Fouling Property of Acryloylmorpholine-Grafted PVDF Membrane: The Effect of Cross-Linking Agent
- Fine Filament Formation Behavior of Polymethylpentene and Polypropylene near Spinneret in Melt Blowing Process
- Fracture Toughness of PP/EPDM/Nano-Ternary Composites: The Role of Distribution of Inorganic Particles
- CO2 Laser Ablation of Microchannel on PMMA Substrate for Effective Fabrication of Microfluidic Chips
- A Novel Micro Wall Slip Model Based on Chain Length and Temperature
- Electrical and Mechanical Properties of Antistatic Poly(vinyl chloride) Composites Filled with Silver Plated Hollow Glass Microspheres
- Prototype System to Study the Effect of Weld Lines on the Performance of Extruded Profiles
- Extrudate Swell of High Density Polyethylenes in Slit (Flat) Dies
- PPS News
- PPS News
- Seikei Kakou Abstracts
- Seikei-Kakou Abstracts