Enhanced Film Blowing of Polylactide by Incorporating Branched Chains and Stereocomplex Crystals

References

Dorgan, J. R., Williams, J. S. and Lewis, D. N., “Melt Rheology of Poly(lactic acid): Entanglement and Chain Architecture Effects”, J. Rheol., 43, 1141–1155 (1999) 10.1122/1.551041Search in Google Scholar

Fang, Y., Carreau, P. J., Lafleur, P. G. and Ymmel, S., “Properties of MLLDPE/LDPE Blends in Film Blowing”, Polym. Eng. Sci., 45, 343–353 (2005) 10.1002/pen.20279Search in Google Scholar

Jandas, P. J., Mohanty, S. and Nayak, S. K., “Sustainability, Compostability, and Specific Microbial Activity On Agricultural Mulch Films Prepared From Poly(lactic Aaid)”, Ind. Eng. Chem. Res., 52, 17714–17724 (2013) 10.1021/ie4023429Search in Google Scholar

Kim, S., Fang, Y., Lafleur, P. G. and Carreau, P. J., “Dynamics and Criteria for Bubble Instabilities in a Single Layer Film Blowing Extrusion”, Polym. Eng. Sci., 44, 283–302 (2004) 10.1002/pen.20027Search in Google Scholar

Korhonen, H., Helminen, A. and Seppälä, J. V., “Synthesis of Polylactides in the Presence of Co-Initiators with Different Numbers of Hydroxyl Groups”, Polymer, 42, 7541–7549 (2001) 10.1016/S0032-3861(01)00150-1Search in Google Scholar

Liu, J., Zhang, S., Zhang, L., Liu, L. and Bai, Y., “Uniaxial Stretching of Polylactide with Different Initial Crystalline Morphologies and Temperature Effect”, Eur. Polym. J., 61, 83–92 (2014) 10.1016/j.eurpolymj.2014.08.021Search in Google Scholar

López-Rodríguez, N., Martínez De Arenaza, I., Meaurio, E. and Sarasua, J., “Improvement of Toughness by Stereocomplex Crystal Formation in Optically Pure Polylactides of High Molecular Weight”, J. Mech. Behav. Biomed. Mater., 37, 219–225 (2014) 10.1016/j.jmbbm.2014.05.022Search in Google Scholar PubMed

Mallet, B., Lamnawar, K. and Maazouz, A., “Improvement of Blown Film Extrusion of Poly(lactic acid): Structure-Processing-Properties Relationships”, Polym. Eng. Sci., 54, 840–857 (2014) 10.1002/pen.23610Search in Google Scholar

Münstedt, H., Kurzbeck, S. and Stange, J.: Advances in Film Blowing, Thermoforming, and Foaming by Using Long-Chain Branched Polymers, Wiley-VCH, Weinheim (2006)10.1002/masy.200651326Search in Google Scholar

Nouri, S., Dubois, C., and, Lafleur, P. G, “Effect of Chemical and Physical Branching on Rheological Behavior of Polylactide”, J. Rheol.59, 4 (2015)10.1122/1.4922486Search in Google Scholar

Nouri, S., Dubois, C. and Lafleur, P. G., “Homocrystal and Stereocomplex Formation Behavior of Polylactides with Different Branched Structures”, Polymer, 67, 227–239 (2015) 10.1016/j.polymer.2015.04.065Search in Google Scholar

Nouri, S., Dubois, C. and Lafleur, P. G., “Synthesis and Characterization of Polylactides with Different Branched Architectures”, J. Polym. Sci., Part B: Polym. Phys., 53, 522–531 (2015) 10.1002/polb.23665Search in Google Scholar

Ou, X., Cakmak, M., “Influence of Biaxial Stretching Mode on the Crystalline Texture in Polylactic Acid Films”, Polymer, 49, 5344–5352 (2008) 10.1016/j.polymer.2008.09.053Search in Google Scholar

Ouchi, T., Ichimura, S. and Ohya, Y., “Synthesis of Branched Poly(lactide) Using Polyglycidol and Thermal, Mechanical Properties of its Solution-Cast Film”, Polymer, 47, 429–434 (2006) 10.1016/j.polymer.2005.11.039Search in Google Scholar

Pitet, L. M., Hait, S. B., Lanyk, T. J. and Knauss, D. M., “Linear and Branched Architectures from the Polymerization of Lactide with Glycidol”, Macromolecules, 40, 2327–2334 (2007) 10.1021/ma0618068Search in Google Scholar

Saeidlou, S., Huneault, M. A., Li, H. and Park, C. B., “Effect of Nucleation and Plasticization on the Stereocomplex Formation between Enantiomeric Poly(lactic acid)s,” Polymer, 54, 5762–5770 (2013) 10.1016/j.polymer.2013.08.031Search in Google Scholar

Saeidlou, S., Huneault, M. A., Li, H. and Park, C. B., “Poly(lactic acid) Stereocomplex Formation: Application to PLA Rheological Property Modification”, J. Appl. Polym. Sci., 131, 41073 (2014) 10.1002/app.41073Search in Google Scholar

Saeidlou, S., Huneault, M. A., Li, H., Sammut, P. and Park, C. B., “Evidence of a Dual Network/Spherulitic Crystalline Morphology in PLA Stereocomplexes,” Polymer, 53, 5816–5824 (2012) 10.1016/j.polymer.2012.10.030Search in Google Scholar

Shirai, M. A., Grossmann, M. V. E., Mali, S., Yamashita, F., Garcia, P. S. and Muller, C. M. O., “Development of Biodegradable Flexible Films of Starch and Poly(lactic acid) Plasticized with Adipate or Citrate Esters”, Carbohydr. Polym., 92, 19–22 (2013) 10.1016/j.carbpol.2012.09.038Search in Google Scholar PubMed

Sirisinha, K., Somboon, W., “Melt Characteristics, Mechanical, and Thermal Properties of Blown Film from Modified Blends of Poly(butylene adipate-co-terephthalate) and Poly(lactide)”, J. Appl. Polym. Sci., 124, 4986–4992 (2012)Search in Google Scholar

Stoclet, G., Seguela, R., Lefebvre, J. M., Elkoun, S. and Vanmansart, C., “Strain-Induced Molecular Ordering in Polylactide upon Uniaxial Stretching”, Macromolecules, 43, 1488–1498 (2010) 10.1021/ma9024366Search in Google Scholar

Stoclet, G., Seguela, R., Vanmansart, C., Rochas, C. and Lefebvre, J. M., “WAXS Study of the Structural Reorganization of Semi-Crystalline Polylactide under Tensile Drawing”, Polymer, 53, 519–528 (2012) 10.1016/j.polymer.2011.11.063Search in Google Scholar

Tabatabaei, S. H., Ajji, A., “Crystal Structure and Orientation of Uniaxially and Biaxially Oriented PLA and PP Nanoclay Composite Films”, J. Appl. Polym. Sci., 124, 4854–4863 (2012)Search in Google Scholar

Thellen, C., Orroth, C., Froio, D., Ziegler, D., Lucciarini, J., Farrell, R., D'Souza, N. A. and Ratto, J. A., “Influence of Montmorillonite Layered Silicate on Plasticized Poly(l-lactide) Blown Films”, Polymer, 46, 11716–11727 (2005) 10.1016/j.polymer.2005.09.057Search in Google Scholar

Tsuji, H., “Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications”, Macromol. Biosci., 5 (Compendex), 569–597 (2005)10.1002/mabi.200500062Search in Google Scholar

Tsuji, H., Ikada, Y., “Stereocomplex Formation between Enantiomeric Poly(lactic acid)s. XI. Mechanical Properties and Morphology of Solution-Cast Films”, Polymer, 40, 6699–6708 (1999) 10.1016/S0032-3861(99)00004-XSearch in Google Scholar

Tweed, E. C. G., Stephens, H. M., and, Riegert, T. E., U.S. Patent 8133558 (2012)Search in Google Scholar

Wang, Y., Li, M. and Shen, C., “Effect of Constrained Annealing on the Microstructures of Extrusion Cast Polylactic Acid Films”, Mater. Lett., 65, 3525–3528 (2011) 10.1016/j.matlet.2011.07.090Search in Google Scholar

Wang, Y., Zhang, H., Li, M., Cao, W., Liu, C. and Shen, C., “Orientation and Structural Development of Semicrystalline Poly(lactic acid) under Uniaxial Drawing Assessed by Infrared Spectroscopy and X-Ray Diffraction”, Polym. Test., 41, 163–171 (2015) 10.1016/j.polymertesting.2014.11.010Search in Google Scholar

Wen, T., Xiong, Z., Liu, G., Zhang, X., De Vos, S., Wang, R., Joziasse, C. A. P., Wang, F. and Wang, D., “The Inexistence of Epitaxial Relationship between Stereocomplex and a Crystal of Poly(lactic acid): Direct Experimental Evidence”, Polymer, 54, 1923–1929 (2013) 10.1016/j.polymer.2013.02.010Search in Google Scholar

Wolf, F. K., Frey, H., “Inimer-Promoted Synthesis of Branched and Hyperbranched Polylactide Copolymers”, Macromolecules, 42, 9443–9456 (2009) 10.1021/ma9016746Search in Google Scholar

Yamane, H., Sasai, K., Takano, M. and Takahashi, M., “Poly(d-lactic acid) as a Rheological Modifier of Poly(l-lactic acid): Shear and Biaxial Extensional Flow Behavior”, J. Rheol., 48, 599–609 (2004) 10.1122/1.1687736Search in Google Scholar

Zenkiewicz, M., Richert, J. and Rozanski, A., “Effect of Blow Moulding Ratio on Barrier Properties of Polylactide Nanocomposite Films”, Polym. Test., 29, 251–257 (2010) 10.1016/j.polymertesting.2009.11.008Search in Google Scholar

Zhang, H., Liang, H., Bian, J., Hao, Y., Han, L., Wang, X., Zhang, G., Liu, S. and Dong, L., “Influence of Acrylic Impact Modifier on Plasticized Polylactide Blown Films”, Polym. Int., 63, 1076–1084 (2014) 10.1002/pi.4615Search in Google Scholar

Zhang, J., Tashiro, K., Tsuji, H. and Domb, A. J., “Disorder-To-Order Phase Transition and Multiple Melting Behavior of Poly(l-lactide) Investigated by Simultaneous Measurements of WAXD and DSC”, Macromolecules, 41, 1352–1357 (2008) 10.1021/ma0706071Search in Google Scholar

Zhao, Y.-L., Cai, Q., Jiang, J., Shuai, X.-T., Bei, J.-Z., Chen, C.-F. and Xi, F., “Synthesis and Thermal Properties of Novel Star-Shaped Poly(l-lactide)s with Starburst PAMAM-OH Dendrimer Macroinitiator”, Polymer, 43, 5819–5825 (2002) 10.1016/S0032-3861(02)00529-3Search in Google Scholar