Research and Application of Wireless Temperature Measurement Device in High Temperature Enclosed Environment
-
Q. Liu
Abstract
Rotational molding, which is widely used in furnishing, entertainment facilities, automotive and boats, military industry and other fields, is a forming method used to produce hollow thermoplastic products. Temperature is the most important process parameter in the rotational molding process, so accurate temperature modulation and control are undoubtedly the main way to ensure product quality. During the rotational molding process, temperature in the oven is very high. Current temperature measuring device cannot make real-time measurement and cannot provide the necessary reference for accurate temperature modulation and control. This article provides an analysis of a wireless temperature measurement device which is used in high temperature enclosed environment, researches the structure, the barrier principle of the temperature measurement device. Finally, tests have been done to verify the working performance. Accurate monitoring and control of the temperature parameter during the rotational molding process can not only improve the working efficiency and energy efficiency of the rotational molding machine, but also provide the reference to design the rotational molding device and molds.
References
Banerjee, S., Yan, W. and Bhattacharyya, D., “Modeling of Heat Transfer in Rotational Molding”, Polym. Eng. Sci., 48, 2188–2197 (2008) 10.1002/pen.21164Suche in Google Scholar
Cramez, M. C., Oliveira, M. J. and Crawford, R. J., “Effect of Nucleating Agents and Cooling Rate on the Microstructure and Properties of a Rotational Moulding Grade of Polypropylene”, J. Mater. Sci., 36, 2151–2161 (2001) 10.1023/A:1017583731513Suche in Google Scholar
Crawford, R. J., Nugent, P. J., “A New Process Control System for Rotational Moulding”, Plast. Rubber Compos. Process. Appl., 17, 23–31 (1992)Suche in Google Scholar
Crawford, R. J., Throne, J. L.: Rotational Molding Technology, William Andrew Publishing, New York (2002)10.1016/B978-188420785-3.50004-6Suche in Google Scholar
Crawford, R. J.: Rotational Moulding of Plastics, 1rd Edition, John Wiley and Sons, Chichester, UK (1992)Suche in Google Scholar
Jie, C.-C., “Reflection of Rotational Molding Process”, World Plastics, 23, 44–47 (2005)Suche in Google Scholar
Jun, L., “Research on Numerical Simulation of Thermal Environment in Oven”, Building Energy & Environment, 25, 78–85 (2006)Suche in Google Scholar
Klim, K., Alanakiev, J. and Hull, B., “Numerical Modeling for Rotational Moulding with Non-Isothermal Heating Plastics”, Plast. Rubber Compos. Process. Appl., 10, 421–427 (2003)Suche in Google Scholar
Liu, Q., Yumei, D., Zhiwei, J., Yuexing, L. and WeiminY., “The Research on the Heating Time of Rotational Molding”, Key Eng. Mater., 561, 285–290 (2013) 10.4028/www.scientific.net/KEM.561.285Suche in Google Scholar
Wei, P., Changfeng, G., Liu, Q. and Weimin, Y., “Numerical Simulation Study on Temperature Field in an Oven of Rotational Molding Machine”, Machinery Design & Manufacture, 9, 105–107 (2012)Suche in Google Scholar
© 2016, Carl Hanser Verlag, Munich
Artikel in diesem Heft
- Contents
- Contents
- Regular Contributed Articles
- Research and Application of Wireless Temperature Measurement Device in High Temperature Enclosed Environment
- Influence on Product Quality by pvT-Optimised Processing in Injection Compression Molding
- Effect of Plug Temperature on the Strain and Thickness Distribution of Components Made by Plug Assist Thermoforming
- Influence of Processing Parameters and Composition on the Effective Compatibilization of Polypropylene–Poly(ethylene terephthalate) Blends
- Impact Modification of Isotactic Polypropylene with Ethylene-Propylene Diene Monomer Rubber
- Impact Behavior of Continuous Biaxial Reinforced Composites Based on Bio-Polyamides and Man-Made Cellulose Fibres
- Preparation and Anti-Fouling Property of Acryloylmorpholine-Grafted PVDF Membrane: The Effect of Cross-Linking Agent
- Fine Filament Formation Behavior of Polymethylpentene and Polypropylene near Spinneret in Melt Blowing Process
- Fracture Toughness of PP/EPDM/Nano-Ternary Composites: The Role of Distribution of Inorganic Particles
- CO2 Laser Ablation of Microchannel on PMMA Substrate for Effective Fabrication of Microfluidic Chips
- A Novel Micro Wall Slip Model Based on Chain Length and Temperature
- Electrical and Mechanical Properties of Antistatic Poly(vinyl chloride) Composites Filled with Silver Plated Hollow Glass Microspheres
- Prototype System to Study the Effect of Weld Lines on the Performance of Extruded Profiles
- Extrudate Swell of High Density Polyethylenes in Slit (Flat) Dies
- PPS News
- PPS News
- Seikei Kakou Abstracts
- Seikei-Kakou Abstracts
Artikel in diesem Heft
- Contents
- Contents
- Regular Contributed Articles
- Research and Application of Wireless Temperature Measurement Device in High Temperature Enclosed Environment
- Influence on Product Quality by pvT-Optimised Processing in Injection Compression Molding
- Effect of Plug Temperature on the Strain and Thickness Distribution of Components Made by Plug Assist Thermoforming
- Influence of Processing Parameters and Composition on the Effective Compatibilization of Polypropylene–Poly(ethylene terephthalate) Blends
- Impact Modification of Isotactic Polypropylene with Ethylene-Propylene Diene Monomer Rubber
- Impact Behavior of Continuous Biaxial Reinforced Composites Based on Bio-Polyamides and Man-Made Cellulose Fibres
- Preparation and Anti-Fouling Property of Acryloylmorpholine-Grafted PVDF Membrane: The Effect of Cross-Linking Agent
- Fine Filament Formation Behavior of Polymethylpentene and Polypropylene near Spinneret in Melt Blowing Process
- Fracture Toughness of PP/EPDM/Nano-Ternary Composites: The Role of Distribution of Inorganic Particles
- CO2 Laser Ablation of Microchannel on PMMA Substrate for Effective Fabrication of Microfluidic Chips
- A Novel Micro Wall Slip Model Based on Chain Length and Temperature
- Electrical and Mechanical Properties of Antistatic Poly(vinyl chloride) Composites Filled with Silver Plated Hollow Glass Microspheres
- Prototype System to Study the Effect of Weld Lines on the Performance of Extruded Profiles
- Extrudate Swell of High Density Polyethylenes in Slit (Flat) Dies
- PPS News
- PPS News
- Seikei Kakou Abstracts
- Seikei-Kakou Abstracts
