An Overview of Molten Polymer Drawing Instabilities

References

Agassant, J. F., Avenas, P., Sergent, J. Ph., Vergnes, B. and Vincent, M., “La Mise en Forme des Matières plastiques”, Techniques et Documentation (Lavoisier), Paris (1996)Search in Google Scholar

Agassant, J. F., Bouamra, R., PeitiC., HaudinJ.M., “Cast Film Extrusion, Geometrical Defects and Stability”, Proceedings of the Polymer Processing Society Meeting, Yamagata (2006)Search in Google Scholar

Andre, J. M., Agassant, J. F., Demay, Y., Haudin, J. M. and Monasse, B., “Numerical Modelling of the Polymer Film Blowing Process”, Int. J. Form. Processes, 1, 197–210 (1998)Search in Google Scholar

Anturkar, N. R., Co, A., “Draw Resonance in Film Casting of Viscoelastic Fluids: A Linear Stability Analysis”, J. Non-Newtonian Fluid Mech., 28, 287–307 (1988) DOI: http://dx.doi.org/10.1016/0377-0257(88)87002-2Search in Google Scholar

Barq, P., Haudin, J. M., Agassant, J. F., Roth, H. and Bourgin, P., “Instability Phenomena in Film Casting Process. Experimental and Numerical Approaches”, Int. Polym. Proc., 5, 264–271 (1990) DOI: http://dx.doi.org/10.3139/217.900264Search in Google Scholar

Barq, P., Haudin, J. M., Agassant, J. F. and Bourgin, P., “Stationary and Dynamic Analysis of Film Casting Process, Int. Polym. Proc., 9, 350–358 (1994) DOI: http://dx.doi.org/10.3139/217.940350Search in Google Scholar

Blyler, L. L., Gieniewski, C., “Melt Spinning and Draw Resonance of a Poly(-methyl styrene/silicone) Block Copolymer”, Polym. Eng. Sci., 28, 140–148 (1980) DOI: http://dx.doi.org/10.1002/pen.760200205Search in Google Scholar

Bourrigaud, S., Marin, G., Dabas, V., Dupuy, C. and Silagy, D., “The Draw Ratio-Deborah Number Diagram: A Useful Tool for Coating Applications”, Polym. Eng. Sci., 46, 372–380 (2006) DOI: http://dx.doi.org/10.1002/pen.20476Search in Google Scholar

Cain, J. J., Denn, M. M., “Multiplicities and Instabilities In Film Blowing”, Polym. Eng. Sci., 28, 1527–1541 (1988) DOI: http://dx.doi.org/10.1002/pen.760282303Search in Google Scholar

Chambon, F., Agassant, J. F., Demay, Y., Silagy, D. and Ohlsson, U.S. Patent W09631348 (1996)Search in Google Scholar

Chang, J. C., Denn, M. M., “An Experimental Study of Isothermal Spinning of Newtonian and Viscoelastic Liquid”, J. Non-Newtonian Fluid Mech., 5, 369–385, (1979) DOI: http://dx.doi.org/10.1016/0377-0257(79)85024-7Search in Google Scholar

Co, A., “Chapter 10 Draw Resonnance in Film Casting”, in Polymer Processing Instabilities: Control and Understanding, Hatzikiriakos, S. V., Migler, K. B. (Eds.), Marcel Dekker, New York (2005)Search in Google Scholar

Demay, Y., “Instabilité d'Etirage et Bifurcation de Hopf”. PhD Thesis, University Nice (1983)Search in Google Scholar

Demay, Y., Agassant, J. F., “Application de la Stabilité Linéaire à l'étude du Filage Textile Isotherme et non-Isotherme”, J. Meca. Theo. Appl., 1, 763–782 (1982)Search in Google Scholar

Demay, Y., Agassant, J. F., “Experimental Study of the Draw Resonance in Fiber Spinning”, J. Non-Newtonian Fluid Mech., 18, 187–198 (1985) DOI: http://dx.doi.org/10.1016/0377-0257(85)85021-7Search in Google Scholar

Denn, M. M., Petrie, C. J. S. and Avenas, P., “Mechanics of Steady Spinning of a Viscoelastic Liquid”, AIChE J., 21, 791–799 (1975) DOI: http://dx.doi.org/10.1002/aic.690210423Search in Google Scholar

Doufas, A. K., Mchugh, A. J., “Simulation of Film Blowing Including Flow-Induced Crystallisation”, J. Rheol., 45, 1085–1104 (2001) DOI: http://dx.doi.org/10.1122/1.1392300Search in Google Scholar

Fischer, R. J., Denn, M. M., “Finite-Amplitude Stability and Draw Resonance in Isothermal Melt Spinning”, Chem. Eng. Sci., 30, 1129–1134 (1975) DOI: http://dx.doi.org/10.1016/0009-2509(75)87015-1Search in Google Scholar

Fischer, R. J., Denn, M. M., “A Theory of Isothermal Melt Spinning and Draw Resonance”, AIChE. J., 22, 236–246 (1976) DOI: http://dx.doi.org/10.1002/aic.690220203Search in Google Scholar

Fortin, A., Carrier, P., Demay, Y., “Numerical Simulation of Coextrusion and Film Casting”. Int. J. Numer. Meth. Fluids, 20, 31–57 (1995) DOI: http://dx.doi.org/10.1002/fld.1650200103Search in Google Scholar

Ghaneh-Fard, A., Carreau, P. J. and Lafleur, P. G., “Study of Instabilities in Film Blowing”, AIChE. J., 42, 1388–1396 (1996) DOI: http://dx.doi.org/10.1002/aic.690420519Search in Google Scholar

Ghiljels, A., Ente, J. J. S. M., “Draw Resonance Studies on Polypropylene Melts”, Proceedings of the International Conference on Rheology, Naples (1980)10.1007/978-1-4684-3746-1_3Search in Google Scholar

Gupta, R. K., Drechsel, P. D., “Draw Resonance in the Non-Isothermal Spinning of Polypropylene”, 2nd World Congress of Chemical Engineering, Montréal, Canada (1981)Search in Google Scholar

Han, C. D., Park, J. M., “Studies on Blow Film Extrusion. I. Experimental Determination of Elongational Viscosity”, J. Appl. Polym. Sci., 19, 3257–3276 (1975) DOI: http://dx.doi.org/10.1002/app.1975.070191212Search in Google Scholar

Henrichsen, L. K., Mchugh, A. J., “Analysis of Film Blowing Process with Flow Enhanced Crystallisation – Part 2: Linearized Sensitivity and Stability Behavior”, Int. Polym. Proc., 22, 190–197 (2007) DOI: http://dx.doi.org/10.3139/217.1004Search in Google Scholar

Housiadas, K., Tsamopoulos, J., “Unsteady Flow of an Axisymmetric Annular Film under Gravity”, Phys. Fluids, 10, 2500–2516 (1998) DOI: http://dx.doi.org/10.1063/1.869766Search in Google Scholar

Hyun, J. C., “Draw Resonance in Polymer Processing: A Short Chronology and a New Approach”, Korea-Australia Rheology Journal, 11, 279–285 (1999)Search in Google Scholar

Hyun, J. C., Kim, H., Lee, J. S., Song, H. S. and Jung, H. W., “Transient Solutions Of The Dynamics In Film Blowing Processes”, J. Non-Newtonian. Fluid Mech., 121, 157–162 (2004)10.1016/j.jnnfm.2004.06.004Search in Google Scholar

Ishihara, H., Kase, S., “Studies on Melt Spinning. V. Draw Resonance as a Limit Cycle”, J. Appl. Polym. Sci., 19, 557–566 (1975) DOI: http://dx.doi.org/10.1002/app.1975.070190218Search in Google Scholar

Ishihara, H., Kase, S., “Studies on Melt Spinning. VI. Simulation of Draw Resonance Using Newtonian and Power Law Viscosities”, J. Appl. Polym. Sci., 20, 169–191 (1976) DOI: http://dx.doi.org/10.1002/app.1976.070200116Search in Google Scholar

Jarecki, L., Ziabicki, A., “Viscosity Effects in Computer Modeling of Fiber Spinning from Crystallizing Polymer Melts”, Polimery, 49, 101–109 (2004)10.14314/polimery.2004.101Search in Google Scholar

Jung, H. W., Song, H. S. and Hyun, J. C., “Analysis of the Stabilizing Effect of Spinline Cooling in Melt Spinning”, J. Non-Newtonian Fluid Mech., 87, 165–174 (1999) DOI: http://dx.doi.org/10.1016/S0377-0257(99)00061-0Search in Google Scholar

Jung, H. W., Hyun, J. C., “Chapter 11 Fiber Spinning and Film Blowing Instabilities”, in Polymer Processing Instabilities: Control and Understanding, Hatzikiriakos, S. V., Migler, K. B. (Eds.), Marcel Dekker, New York (2005)Search in Google Scholar

Jung, H. W., Hyun, J. C., “Instabilities in Extensional Deformation Polymer Processing”, Rheology Review, The British Society of Rheology, 131–164 (2006)Search in Google Scholar

Kanai, T., White, J. L., “Kinematics, Dynamics and Stability of the Tubular Film Extrusion of Various Polyethylenes”, Polym. Eng. Sci., 24, 1185–1201 (1984) DOI: http://dx.doi.org/10.1002/pen.760241508Search in Google Scholar

Kanai, T., White, J. L., “Dynamics, Heat Transfer and Structure Development in Tubular Film Extrusion of Polymer Melts: A Mathematical Model and Predictions”, J. Polym. Eng., 5, 135–157 (1985)10.1515/polyeng-1985-0204Search in Google Scholar

Kase, S., Matsuo, T., “Studies on Melt Spinning I: Fundamental Equations on the Dynamics of Melt Spinning”, J. Polym. Sci. A, 3, 2541–2554 (1965) DOI: http://dx.doi.org/10.1002/pol.1965.100030712Search in Google Scholar

Kase, S., “Studies on Melt Spinning IV: On the Stability of Melt Spinning”, J. Appl. Polym. Sci., 18, 3278–3304 (1974) DOI: http://dx.doi.org/10.1002/app.1974.070181109Search in Google Scholar

Kim, J. M., Lee, J. S., Jung, H. W. and Hyun, J. C., “Transient Solutions of the Dynamics of Film Casting Process Using A 2-D Viscoelastic Model”, J. Non-Newtonian Fluid Mech., 132, 53–60 (2005) DOI: http://dx.doi.org/10.1016/j.jnnfm.2005.10.002Search in Google Scholar

Kohler, W. H., Mchugh, A. J., “Sensitivity Analysis of Low-Speed Fiber Spinning of Isotactic Polypropylene”, Chem. Eng. Sci., 62, 2690–2697 (2007) DOI: http://dx.doi.org/10.1016/j.ces.2007.02.015Search in Google Scholar

Kohler, W. H., Mchugh, A. J., “Prediction of the Influence of Flow-Enhanced Crystallization on the Dynamics of Fiber Spinning”, Polym. Eng. Sci., 48, 88–96 (2008) DOI: http://dx.doi.org/10.1002/pen.20888Search in Google Scholar

Laffargue, J., Parent, L., Lafleur, P. G., Carreau, P. J., Demay, Y. and Agassant, J. F., “Investigation of Bubble Instabilities in Film Blowing Process”, Int. Polym. Proc., 17, 347–353 (2002) DOI: http://dx.doi.org/10.3139/217.1704Search in Google Scholar

Laffargue, J., “Etude et Modelisation du Procédé de Soufflage de Gaine”, PhD Thesis, Mines-Paristech, Sophia-Antipolis (2003)Search in Google Scholar

Laffargue, J., Demay, Y. and Agassant, J. F., “Investigation of Polymer Stretching Instabilities: Application to Film Blowing”, Int. Polym. Proc., 25, 356–371 (2010) DOI: http://dx.doi.org/10.3139/217.2347Search in Google Scholar

Lee, J. S., Jung, H. W., Kim, S. H. and Hyun, J. C., “Effect of Fluid Viscoelasticity on the Draw Resonance Dynamics of Melt Spinning”, J. Non-Newtonian Fluid Mech., 99, 159–166 (2001) DOI: http://dx.doi.org/10.1016/S0377-0257(01)00111-2Search in Google Scholar

Lee, J. S., Shin, D. M., Jung, H. W. and Hyun, J. C., “Transient Solutions of the Dynamics in Fiber Spinning Process Accompagnied by Flow-Induced Crystallization”, J. Non-Newtonian Fluid Mech., 130, 110–116 (2005) DOI: http://dx.doi.org/10.1016/j.jnnfm.2005.08.004Search in Google Scholar

Lee, J. S., Jung, H. W. and Hyun, J. C., “Transient Solutions of Non-Linear Dynamics in Film-Blowing Accompanied by On-Line Crystallisation”, J. Rheol., 55, 257–271 (2011) DOI: http://dx.doi.org/10.1122/1.3532091Search in Google Scholar

Lee, J. S., Jung, H. W. and Hyun, J. C., “Non-Linear Dynamic Behaviour of Non-Isothermal Film Blowing Process under the Condition of Constant Bubble Pressure”, AIChE J., 57, 3565–3570 (2011) DOI: http://dx.doi.org/10.1002/aic.12527Search in Google Scholar

Minoshima, W., White, J. L., “Instability Phenomena in Tubular Film and Melt Spinning of Rheologically Characterized High Density, Low Density and Linear Low Density Polyethylenes”, J. Non-Newtonian Fluid Mech., 19, 275–302 (1986) DOI: http://dx.doi.org/10.1016/0377-0257(86)80052-0Search in Google Scholar

Pearson, J. R. A., Matovich, M. A., “Spinning of a Molten Threadline Stability”, Ind. Eng. Chem. Fund., 8, 605–609 (1969)10.1021/i160032a001Search in Google Scholar

Pearson, J. R. A., Petrie, C. J. S., “The Flow of a Tubular Film, Part 1: Formal Mathematical Representation”, J. Fluid Mech., 40, 1–19 (1970) DOI: http://dx.doi.org/10.1017/S0022112070000010Search in Google Scholar

Pirkle, J. C., Braatz, R. D., “Instabilities and Multiplicities in Non-Isothermal Blown Film Extrusion Including the Effect of Crystallisation”, J. Process Control, 21, 405–414 (2003) DOI: http://dx.doi.org/10.1016/j.jprocont.2010.12.007Search in Google Scholar

Pirkle, J. C., Braatz, R. D., “A Thin-Shell Two-Phase Microstructural Model for Blown Film Extrusion”, J. Rheol., 54, 471–505 (2010) DOI: http://dx.doi.org/10.1122/1.3366603Search in Google Scholar

Shah, Y. T., Pearson, J. R. A., “On the Stability of Non-Isothermal Fiber Spinning”, Ind. Eng. Chem. Fund., 46, 145–149 (1972)Search in Google Scholar

Shin, D. M., Lee, J. S., Jung, H. W. and Hyun, J. C., “High-Speed Fiber Spinning Process with Spinline Flow-Induced Crystallization and Neck-Like Deformation”, Rheol. Acta, 45, 575–582 (2006) DOI: http://dx.doi.org/10.1007/s00397-006-0100-8Search in Google Scholar

Shin, D. M., Lee, J. S., Jung, H. W. and Hyun, J. C., “Transient and Steady-State Solutions of 2-D Viscoelastic Non-Isothermal Simulation Model of Film Casting Process via Finite Element Method”, J. Rheol., 51, 393–407, (2007) DOI: http://dx.doi.org/10.1122/1.2714781Search in Google Scholar

Shin, D. M., Lee, J. S., Jung, H. W. and Hyun, J. C., “Multiplicity, Bifurcation, Stability and Hysteresis in Dynamic Solutions of Film-Blowing Process”, J. Rheol., 51, 605–621 (2007) DOI: http://dx.doi.org/10.1122/1.2736405Search in Google Scholar

Silagy, D., “Modélisation du Procédé d'Extrusion de Film à Plat de Polymère”, PhD Thesis, Ecole des Mines de Paris, (1996)Search in Google Scholar

Silagy, D., Demay, Y. and Agassant, J. F., “Study of the Stability of the Film Casting Process”, Polym. Eng. Sci., 36, 2614–3625 (1996) DOI: http://dx.doi.org/10.1002/pen.10661Search in Google Scholar

Silagy, D., Demay, Y. and Agassant, J. F., “Stationnary and Stability Analysis of the Film Casting Process”, J. Non-Newtonian Fluid Mech., 79, 563–583 (1998) DOI: http://dx.doi.org/10.1016/S0377-0257(98)00119-0Search in Google Scholar

Souli, M., Demay, Y. and Habbal, A., “Finite Element Study of the Draw Resonance Instability”, Eur. J. Mech., B/Fluids, 12, 1–13 (1993)Search in Google Scholar

White, J. L., Yamane, H., “A Collaborative Study of the Rheological Properties and Unstable Melt Spinning Characteristics of Linear and Branched Polyethylene Terephthalates”, Pure Appl. Chem., 57, 1441–1452 (1985) DOI: http://dx.doi.org/10.1351/pac198557101441Search in Google Scholar

Yeow, Y. L., “Stability of Tubular Film Flow: A Model of the Film-Blowing Process”, J. Fluid Mech., 75, 577–591 (1976) DOI: http://dx.doi.org/10.1017/S0022112076000396Search in Google Scholar

Yoon, K. S., Park, C. W., “Stability of a Blown Film Extrusion Process”, Int. Polym. Proc., 14, 342–349 (1999) DOI: http://dx.doi.org/10.3139/217.1565Search in Google Scholar