Thermal Properties and Electrical Conductivity of Graft Copolymers from Polystyrene and Polyvinyl Propionate with Polyaniline
-
S. H. Hosseini
Abstract
A synthesized graft copolymer from polystyrene (PS) and polyvinyl propionate (PVPr) with polyaniline (PANi) with suitable electrical properties, thermal resistance, solubility and processability was optimized. Samples were prepared in the form of smooth and thin films. Four-point probe method was adapted to examine electrical DC conductivity. It was found that the electrical conductivity and thermal stability of copolymers were increased, but their processability and solubility decreased when PANi increased. Thermal stability of copolymers was investigated by Differential Scanning Calorimetry (DSC) and Thermal Gravimetrical Analysis (TGA). The prepared copolymers were much more thermally stable, soluble, flexible and ability to form a film than polyaniline, polystyrene and polyvinyl propionate. An irreversible exothermic transition was observed by DSC, which is believed to be an indication of cross-linking. Percentage of grafted PANi electrical conductivities of PS-g-PANi and PVPr-g-PANi have been examined and produced conductivities, 3.3 × 10−2 and 4.6 × 10−2 S/cm respectively.
References
Angelopoulos, M., Huang, W. S., Park, J. M., Whith, J. R., EP 413 109 (1991)10.1001/archopht.1991.01080030115050Search in Google Scholar
Bae, W. J., et al., “Preparation of Polystyrene/Polyaniline Blends by in situ Polymerization Technique and their Morphology and Electrical Property”, Synth. Met., 132, 239–244(2003), DOI: 10.1016/S0379-6779(02)00451-4Search in Google Scholar
Conklin, J. A., et al., “Thermal Properties of Polyaniline and Poly(aniline-co-o-ethylaniline)”, Macromolecules, 28, 6522–6527(1995), DOI: 10.1021/ma00123a019Search in Google Scholar
Hosseini, S. H., Entezami, A. A., “Chemical and Electrochemical Synthesis of Conducting Graft Copolymer of Vinyl Acetate with Pyrrole and Studies of its Gas Vapor Sensing”, J. Appl. Polym. Sci., 90, 40–48(2003), DOI: 10.1002/app.12483Search in Google Scholar
Hosseini, S. H., Entezami, A. A., “Graft Copolymer of Polystyrene and Polypyrrole and Studies its Gas and Vapor Sensing Properties”, Iranian Polym. J., 14, 101–110(2005)Search in Google Scholar
Hosseini, S. H., Entezami, A. A., “Polypyrrole Based Gas Sensors by Mass and Conductivity Measurement”, Iranian Polym. J., 8, 205–213(1999)Search in Google Scholar
Hosseini, S. H., Entezami, A. A., “Studies Thermal and Electrical Conductivity Behaviours of Polyaniline and Polypyrrole Blends with Polyvinyl Acetate, Polystyrene and Polyvinyl Chloride”, Iranian Polym. J., 14, 3, 201–209(2005)Search in Google Scholar
Hosseini, S. H., Ghavami, A., “Chemical and Electrochemical Synthesis Polyvinyl Propionate Graft Polyaniline”, Iranian Polym. J., 14, 617–626(2005)Search in Google Scholar
Joo, Y. Z., et al., “Charge Transport of Hydrochloric Acid Doped Polyaniline and Poly(o-toluidine) Fibers: Role of Processing”. Macromolecules, 27, 5871–5876(1994), DOI: 10.1021/ma00098a047Search in Google Scholar
Jousseaume, V., et al., “Thermal Behavior of Polyaniline Films and Polyaniline-Polystyrene Blends”, J. Appl. Polym. Sci., 84, 1848–1855(2002), DOI: 10.1002/app.10468Search in Google Scholar
Li, H. C., Khor, E., “A Collagen-Polypyrrole Hybrid: Influence of 3-Butanesulfonate Substitution”, Macromol. Chem. Phys., 196, 1801–1812(1995)10.1002/macp.1995.021960601Search in Google Scholar
Shacklette, L. W., Han, C. C., U. S. Patent 5 422 423 (1995)10.2307/2623522Search in Google Scholar
Wang, X. H., et al., “Thermal Behaviors of Doped Polyaniline”, Synth. Met., 69, 265–266(1995), DOI: 10.1016/0379-6779(94)02443-3Search in Google Scholar
Wang, X. H., Geng, Y. H., “Thermal Behaviors of Doped Polyaniline”, Synth. Met., 69, 265–266(1995), DOI: 10.1016/0379-6779(94)02443-3, DOI: 10.1002/macp.1995.021960601Search in Google Scholar
Wilkie, C. A., et al.: “Chapter 11 Materials and Concepts for Fire Retardancy”, in Fire and Polymers V, Vol. 1013, American Chemical Society, Washington(2009)10.1021/symposiumSearch in Google Scholar
Zheng, L., et al., “Synthesis and Thermal Properties of Hybrid Copolymers of Syndiotactic Polystyrene and Polyhedral Oligomeric Silsequioxane”, J. Polym. Sci., Part A, Polym. Chem., 40, 885–891(2002), DOI: 10.1002/pola.10175Search in Google Scholar
© 2011, Carl Hanser Verlag, Munich
Articles in the same Issue
- Contents
- Contents
- Regular Contributed Articles
- Thermal Properties and Electrical Conductivity of Graft Copolymers from Polystyrene and Polyvinyl Propionate with Polyaniline
- Opto-thermo-mechanical Characterization for Polyester and Polyamide Surgical Sutures
- Study on Creep Behavior of PP/CaCO3 Molded by Vibration Injection Molding at Different Vibration Frequency and Vibration Pressure
- Investigation of the Moldability Parameters of PEG Based Steatite Feedstocks by Powder Injection Molding
- Factorial Optimisation of the Effects of Melt Spinning Conditions on Biodegradable As-spun Aliphatic-Aromatic Co-Polyester Fibres
- Erosion Behavior of Glass-epoxy Composites Filled with SiC from Bamboo Leaf
- Modelling Behaviour of PET for Stretch and Micro-Blow Moulding Applications Using an Elasto-Visco-Plastic Material Model
- Melting in a Single Screw Extruder: Experiments and 3D Finite Element Simulations
- Poly(ethylene-co-butylene)-b-(styrene-ran-maleic anhydride)2 Compatibilizers via Nitroxide Mediated Radical Polymerization
- Formation and Biodegradation of Polyethylene-based Electret Films
- Microstructural Evolution of PP/EPDM/Organoclay Nanocomposites in a Twin Screw Extruder
- Effect of Processing Conditions on Properties of PET/Clay Nanocomposite Films
- Rapid Communications
- The Use of Apparent Yield Stress to Characterize Exfoliation in Polymer Nanocomposites
- PPS-News
- PPS News
Articles in the same Issue
- Contents
- Contents
- Regular Contributed Articles
- Thermal Properties and Electrical Conductivity of Graft Copolymers from Polystyrene and Polyvinyl Propionate with Polyaniline
- Opto-thermo-mechanical Characterization for Polyester and Polyamide Surgical Sutures
- Study on Creep Behavior of PP/CaCO3 Molded by Vibration Injection Molding at Different Vibration Frequency and Vibration Pressure
- Investigation of the Moldability Parameters of PEG Based Steatite Feedstocks by Powder Injection Molding
- Factorial Optimisation of the Effects of Melt Spinning Conditions on Biodegradable As-spun Aliphatic-Aromatic Co-Polyester Fibres
- Erosion Behavior of Glass-epoxy Composites Filled with SiC from Bamboo Leaf
- Modelling Behaviour of PET for Stretch and Micro-Blow Moulding Applications Using an Elasto-Visco-Plastic Material Model
- Melting in a Single Screw Extruder: Experiments and 3D Finite Element Simulations
- Poly(ethylene-co-butylene)-b-(styrene-ran-maleic anhydride)2 Compatibilizers via Nitroxide Mediated Radical Polymerization
- Formation and Biodegradation of Polyethylene-based Electret Films
- Microstructural Evolution of PP/EPDM/Organoclay Nanocomposites in a Twin Screw Extruder
- Effect of Processing Conditions on Properties of PET/Clay Nanocomposite Films
- Rapid Communications
- The Use of Apparent Yield Stress to Characterize Exfoliation in Polymer Nanocomposites
- PPS-News
- PPS News