Home PPS News
Article
Licensed
Unlicensed Requires Authentication

PPS News

Published/Copyright: April 6, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 26 Issue 2

Published Online: 2013-04-06
Published in Print: 2011-05-01

© 2011, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Thermal Properties and Electrical Conductivity of Graft Copolymers from Polystyrene and Polyvinyl Propionate with Polyaniline
  5. Opto-thermo-mechanical Characterization for Polyester and Polyamide Surgical Sutures
  6. Study on Creep Behavior of PP/CaCO3 Molded by Vibration Injection Molding at Different Vibration Frequency and Vibration Pressure
  7. Investigation of the Moldability Parameters of PEG Based Steatite Feedstocks by Powder Injection Molding
  8. Factorial Optimisation of the Effects of Melt Spinning Conditions on Biodegradable As-spun Aliphatic-Aromatic Co-Polyester Fibres
  9. Erosion Behavior of Glass-epoxy Composites Filled with SiC from Bamboo Leaf
  10. Modelling Behaviour of PET for Stretch and Micro-Blow Moulding Applications Using an Elasto-Visco-Plastic Material Model
  11. Melting in a Single Screw Extruder: Experiments and 3D Finite Element Simulations
  12. Poly(ethylene-co-butylene)-b-(styrene-ran-maleic anhydride)2 Compatibilizers via Nitroxide Mediated Radical Polymerization
  13. Formation and Biodegradation of Polyethylene-based Electret Films
  14. Microstructural Evolution of PP/EPDM/Organoclay Nanocomposites in a Twin Screw Extruder
  15. Effect of Processing Conditions on Properties of PET/Clay Nanocomposite Films
  16. Rapid Communications
  17. The Use of Apparent Yield Stress to Characterize Exfoliation in Polymer Nanocomposites
  18. PPS-News
  19. PPS News
https://doi.org/10.3139/217.1124

Articles in the same Issue

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Thermal Properties and Electrical Conductivity of Graft Copolymers from Polystyrene and Polyvinyl Propionate with Polyaniline
  5. Opto-thermo-mechanical Characterization for Polyester and Polyamide Surgical Sutures
  6. Study on Creep Behavior of PP/CaCO3 Molded by Vibration Injection Molding at Different Vibration Frequency and Vibration Pressure
  7. Investigation of the Moldability Parameters of PEG Based Steatite Feedstocks by Powder Injection Molding
  8. Factorial Optimisation of the Effects of Melt Spinning Conditions on Biodegradable As-spun Aliphatic-Aromatic Co-Polyester Fibres
  9. Erosion Behavior of Glass-epoxy Composites Filled with SiC from Bamboo Leaf
  10. Modelling Behaviour of PET for Stretch and Micro-Blow Moulding Applications Using an Elasto-Visco-Plastic Material Model
  11. Melting in a Single Screw Extruder: Experiments and 3D Finite Element Simulations
  12. Poly(ethylene-co-butylene)-b-(styrene-ran-maleic anhydride)2 Compatibilizers via Nitroxide Mediated Radical Polymerization
  13. Formation and Biodegradation of Polyethylene-based Electret Films
  14. Microstructural Evolution of PP/EPDM/Organoclay Nanocomposites in a Twin Screw Extruder
  15. Effect of Processing Conditions on Properties of PET/Clay Nanocomposite Films
  16. Rapid Communications
  17. The Use of Apparent Yield Stress to Characterize Exfoliation in Polymer Nanocomposites
  18. PPS-News
  19. PPS News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 27.9.2025 from https://www.degruyterbrill.com/document/doi/10.3139/217.1124/html
Scroll to top button